VR系列——Oculus Publishing文档：二、发布过程：Oculus商店和Oculus试验平台

一旦你提交应用，我们将根据下面的流程审查。请允许我们花至少两周时间来完成这个过程。

图1：发布流程

应用验证

我们提供单独的命令行验证工具，在上传应用包前，该工具协助你进行基本的检验。建议使用该工具，与你的包出现小问题需要重新提交相比，这么做将会节省很多时间。你可以在这个地址下载支持windows或者Mac OS X系统的工具：https://developer.oculus.com/validator/。

应用提交

注意：在提交应用前，一定要阅读我们的内容标准和要求部分，确保你已经准备好了。

应用和所需的资料准备好后，可通过我们的平台https://dashboard.oculus.com提交应用。注意文件上载过程中，你将被引导到其他标签继续填写信息。

提交面板将通过图2所示的阶段引导你。当你的App上传完成，我们将马上执行基本的验证。

图2：提交流程

发布App版本更新

如果你想更新已发布的版本。登陆到提交面板，将鼠标悬停在准备更新的App图标，选择更新App。

提交更新的发布包的过程与初始包的过程一致，所有填报内容是预先填写好的。如果需要的话,你也可以更新这些填报内容。

注意：不要改变二进制包的名称

原文如下

Once you submit your application, we will review it as illustrated below. Please allow at least two weeks to complete the publishing process.

Figure 1: Publishing Process

Application Validation

We offer a simple Submission Validator command-line tool which you may run against your package to perform basic checks for our requirements before you uploading it. We recommend using this tool, as it may save you a significant amount of time if we find a simple problem that requires you to resubmit your application. You may download the tool for Windows or Mac OS X here: https://developer.oculus.com/validator/

Application Submission

Note: Before submitting y
4000
our app, be sure to review our Content Standards and Requirements to be sure you’re ready.

Once you have prepared your application and the necessary assets, submit your application through our Submission Dashboard at https://dashboard.oculus.com. Note that you may navigate to other tabs in the submission process and continue filling in information while your files upload.

The Submission Dashboard will guide you through the stages as illustrated below. When your app upload is complete, we will immediately run some basic validation checking on your application.

Figure 2: Submission Process

Updating a Previously-Published Application

If you would like to submit an updated binary for an application you have previously published, log into the Submission Dashboard, mouseover the icon for the application you’d like to update, and select Update App.

The procedure for submitting an updated binary is pretty much the same as the initial submission process, except you find that all entries are pre-filled with the values used in your previous submission. You may update those values as necessary.

Note: Do not change the PackageName of your binary.