使用Zabbix批量监控网站可用性方案二
2016-08-16 17:35
495 查看
一 应用场景描述
在上一篇文章中介绍了 使用Zabbix批量监控网站可用性方案一 Zabbix自带的Web监控只是利用libcurl库在Zabbix server或者proxy端来检测所有的url，这样实际上是不能检查到区域访问各个url的网络质量的。本文则使用Zabbix LLD，pycurl模块以及Zabbix sender来收集不同区域的Zabbix agent访问各个url的网络质量。
二 编写脚本
python多线程版本
需要注意zabbix host添加了模板才能收到数据，要不然zabbix_sender会发送失败
脚本中把所有的key，vale写入到一个临时文件，然后通过zabbix_sender -i 参数从这个文件中读取key，value批量发送
通过使用python的多线程模块threading结合pycurl处理很多个url时间确实会节省很多，但是pycurl也就是libcurl在多线程情况下的DNS解析有很大的问题，线程数目一多，有些url的DNS解析速度会很慢，甚至本来单独使用curl去访问只需几十毫秒，在多线程下访问这个url可能会达到30秒。这是个很大的问题。所以，为了更为准确地得到每个url的响应时间，只能不使用python多线程，而是采用for循环挨个去访问。
python for循环版本
添加定时任务
添加zabbix配置文件 zabbix_agentd.conf.d/check_urls.conf
三 制作Zabbix模板
模板参见附件
参考文档：
http://john88wang.blog.51cto.com/
http://john88wang.blog.51cto.com/2165294/1665253
附件：http://down.51cto.com/data/2368054
在上一篇文章中介绍了 使用Zabbix批量监控网站可用性方案一 Zabbix自带的Web监控只是利用libcurl库在Zabbix server或者proxy端来检测所有的url，这样实际上是不能检查到区域访问各个url的网络质量的。本文则使用Zabbix LLD，pycurl模块以及Zabbix sender来收集不同区域的Zabbix agent访问各个url的网络质量。
二 编写脚本
python多线程版本
#!/usr/bin/python
#this script is used to check multiple urls within different websites from a given file which contains all the urls of different websites
#use zabbix low level discovery(LLD) to discovery different websites and different urls,and then use pycurl to check those urls,finally send the result to zabbix proxy or zabbix server using zabbix_sender
# here has two zabbix macros: {#WEBSITE_NAME} and {#WEBSITE_URL}
# tested on zabbix 3.0
#
#written by john wang
#
#curl_easy_perform()
# |
# |--NAMELOOKUP
# |--|--CONNECT
# |--|--|--APPCONNECT
# |--|--|--|--PRETRANSFER
# |--|--|--|--|--STARTTRANSFER
# |--|--|--|--|--|--TOTAL
# |--|--|--|--|--|--REDIRECT
import json
import logging
import os,sys,time
import threading
import Queue
import subprocess
try:
from cStringIO import StringIO
except ImportError:
from StringIO import StringIO
import pycurl
# We should ignore SIGPIPE when using pycurl.NOSIGNAL - see
# the libcurl tutorial for more info.
try:
import signal
from signal import SIGPIPE,SIG_ING
signal.signal(signal.SIGPIPE,signal.SIG_IGN)
except ImportError:
pass
# need a given txt file contains urls
#eg.
#baidu www.baidu.com
#taobao www.taobao.com
try:
if sys.argv[1]=="-":
urls=sys.stdin.readlines()
else:
urls=open(sys.argv[1],'rb').readlines()
#print urls
except:
print "Usage: %s check_urls.txt (list_websites)" %sys.argv[0]
raise SystemExit
#logging.basicConfig(filename='/tmp/check_urls.log', level=logging.WARNING, format='%(asctime)s %(levelname)s: %(message)s')
zabbix_conf='/opt/app/zabbix/conf/zabbix_agentd.conf'
class Curl:
def __init__(self,url):
self.url=url
self.body=StringIO()
self.http_code=0
self._curl=pycurl.Curl()
self._curl.setopt(pycurl.URL,self.url)
self._curl.setopt(pycurl.FOLLOWLOCATION,True)
self._curl.setopt(pycurl.DNS_CACHE_TIMEOUT,0)
self._curl.setopt(pycurl.DNS_USE_GLOBAL_CACHE,False)
self._curl.setopt(pycurl.CONNECTTIMEOUT,30)
self._curl.setopt(pycurl.TIMEOUT,60)
self._curl.setopt(pycurl.FRESH_CONNECT,True)
self._curl.setopt(pycurl.FORBID_REUSE,True)
self._curl.setopt(pycurl.WRITEFUNCTION,self.body.write)
self._curl.setopt(pycurl.NOSIGNAL,1)
self._curl.debug=0
def perform(self):
try:
self._curl.perform()
except Exception as e:
#logging.warning(url+"\t" + str(e))
return
def close(self):
try:
self.http_code=self._curl.getinfo(pycurl.HTTP_CODE)
self.total_time=self._curl.getinfo(pycurl.TOTAL_TIME)
self.namelookup_time=self._curl.getinfo(pycurl.NAMELOOKUP_TIME)
self.connect_time=self._curl.getinfo(pycurl.CONNECT_TIME)-self._curl.getinfo(pycurl.NAMELOOKUP_TIME)
self.appconnect_time=max(0,(self._curl.getinfo(pycurl.APPCONNECT_TIME) - self._curl.getinfo(pycurl.CONNECT_TIME)))
self.pretransfer_time=self._curl.getinfo(pycurl.PRETRANSFER_TIME) - max(self._curl.getinfo(pycurl.APPCONNECT_TIME),self._curl.getinfo(pycurl.CONNECT_TIME))
self.starttransfer_time=self._curl.getinfo(pycurl.STARTTRANSFER_TIME) - self._curl.getinfo(pycurl.PRETRANSFER_TIME)
self.redirect_time=max(0,self._curl.getinfo(pycurl.REDIRECT_TIME) - self._curl.getinfo(pycurl.TOTAL_TIME))
self.speed_download=self._curl.getinfo(pycurl.SPEED_DOWNLOAD)
except Exception as e:
#logging.warning(url+"\t"+str(e))
self.http_code=0
self.total_time=0
self.namelookup_time=0
self.connect_time=0
self.appconnect_time=0
self.pretransfer_time=0
self.starttransfer_time=0
self.redirect_time=0
self.speed_download=0
self._curl.close()
queue=Queue.Queue()
websites=[]
tmpfile='/tmp/check_url_items.txt'
for line in urls:
line=line.strip()
if not line or line[0] == "#":
continue
name,url=line.split()
element={'{#WEBSITE_NAME}':name,
'{#WEBSITE_URL}':url
}
websites.append(element)
#logging.debug('Discovered website ' + name + '\t' + url)
queue.put((name,url))
assert queue.queue, "no urls are given"
num_urls=len(queue.queue)
#num_conn=min(num_conn,num_urls)
num_conn=num_urls
#assert 1 <= num_conn < = 1000,"invalid number of concurrent connections"
class WorkerThread(threading.Thread):
def __init__(self,queue):
threading.Thread.__init__(self)
self.queue=queue
def run(self):
while 1:
try:
name,url=self.queue.get_nowait()
except Queue.Empty:
raise SystemExit
c=Curl(url)
c.perform()
c.close()
for item in [ 'http_code','total_time','namelookup_time','connect_time','appconnect_time','pretransfer_time','starttransfer_time','redirect_time','speed_download' ]:
key='website[{0},{1},{2}]'.format(name,url,item)
if item=='http_code':
value=c.http_code
elif item=='total_time':
value=c.total_time
elif item=='namelookup_time':
value=c.namelookup_time
#print key+":"+str(value)
elif item=='connect_time':
value=c.connect_time
elif item=='appconnect_time':
value=c.appconnect_time
elif item=='pretransfer_time':
value=c.pretransfer_time
elif item=='starttransfer_time':
value=c.starttransfer_time
elif item=='redirect_time':
value=c.redirect_time
elif item=='speed_download':
value=c.speed_download
f=open(tmpfile,'a')
f.write("- %s %s\n" % (key, value))
def send_zabbix_data(tmpfile):
'''Send the queue data to Zabbix.'''
'''Get key value from temp file. '''
args = '/opt/app/zabbix/sbin/zabbix_sender -c {0} -i {1} -vv'
return_code = 0
process = subprocess.Popen(args.format(zabbix_conf, tmpfile),
shell=True, stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
out, err = process.communicate()
#print err
#logging.debug("Finished sending data")
return_code = process.wait()
#logging.info("Found return code of " + str(return_code))
#if return_code != 0:
# logging.warning(out)
# logging.warning(err)
#else:
# logging.debug(err)
# logging.debug(out)
#print return_code
#print len(open(tmpfile).readlines())
#for line in open(tmpfile).readlines():
# print line
def main():
try:
if sys.argv[1] and sys.argv[2]=="list_websites":
print json.dumps({'data': websites},indent=4,separators=(',',':'))
elif sys.argv[1] and sys.argv[2]=="send_data":
#delete tmpfile first
os.unlink(tmpfile)
#start a bunch of threads
threads=[]
for dummy in range(num_conn):
t=WorkerThread(queue)
t.start()
threads.append(t)
#wait for all threads to finish
for thread in threads:
thread.join()
send_zabbix_data(tmpfile)
else:
print "Usage: %s check_urls.txt (list_websites|send_data)" %sys.argv[0]
raise SystemExit
except:
raise SystemExit
if __name__=='__main__':
main()/usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt list_websitesurl自动发现
/usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt send_data使用zabbix_sender发送数据到zabbix proxy或者server
需要注意zabbix host添加了模板才能收到数据，要不然zabbix_sender会发送失败
脚本中把所有的key，vale写入到一个临时文件，然后通过zabbix_sender -i 参数从这个文件中读取key，value批量发送
通过使用python的多线程模块threading结合pycurl处理很多个url时间确实会节省很多，但是pycurl也就是libcurl在多线程情况下的DNS解析有很大的问题，线程数目一多，有些url的DNS解析速度会很慢，甚至本来单独使用curl去访问只需几十毫秒，在多线程下访问这个url可能会达到30秒。这是个很大的问题。所以，为了更为准确地得到每个url的响应时间，只能不使用python多线程，而是采用for循环挨个去访问。
python for循环版本
#!/usr/bin/python
#this script is used to check multiple urls within different websites from a given file which contains all the urls of different websites
#use zabbix low level discovery(LLD) to discovery different websites and different urls,and then use pycurl to check those urls,finally send the result to zabbix proxy or zabbix server using zabbix_sender
# here has two zabbix macros: {#WEBSITE_NAME} and {#WEBSITE_URL}
# tested on zabbix 3.0
#
#written by john wang
#
#curl_easy_perform()
# |
# |--NAMELOOKUP
# |--|--CONNECT
# |--|--|--APPCONNECT
# |--|--|--|--PRETRANSFER
# |--|--|--|--|--STARTTRANSFER
# |--|--|--|--|--|--TOTAL
# |--|--|--|--|--|--REDIRECT
import json
import logging
import os,sys,time
import threading
import Queue
import subprocess
try:
from cStringIO import StringIO
except ImportError:
from StringIO import StringIO
import pycurl
# We should ignore SIGPIPE when using pycurl.NOSIGNAL - see
# the libcurl tutorial for more info.
try:
import signal
from signal import SIGPIPE,SIG_ING
signal.signal(signal.SIGPIPE,signal.SIG_IGN)
except ImportError:
pass
# need a given txt file contains urls
#eg.
#baidu www.baidu.com
#taobao www.taobao.com
try:
if sys.argv[1]=="-":
urls=sys.stdin.readlines()
else:
urls=open(sys.argv[1],'rb').readlines()
#print urls
except:
print "Usage: %s check_urls.txt (list_websites)" %sys.argv[0]
raise SystemExit
#logging.basicConfig(filename='/tmp/check_urls.log', level=logging.DEBUG, format='%(asctime)s %(levelname)s: %(message)s')
zabbix_conf='/opt/app/zabbix/conf/zabbix_agentd.conf'
class Curl:
def __init__(self,url):
self.url=url
self.body=StringIO()
self.http_code=0
self._curl=pycurl.Curl()
self._curl.setopt(pycurl.URL,self.url)
self._curl.setopt(pycurl.FOLLOWLOCATION,True)
self._curl.setopt(pycurl.DNS_CACHE_TIMEOUT,0)
self._curl.setopt(pycurl.DNS_USE_GLOBAL_CACHE,False)
self._curl.setopt(pycurl.CONNECTTIMEOUT,10)
self._curl.setopt(pycurl.TIMEOUT,30)
self._curl.setopt(pycurl.FRESH_CONNECT,True)
self._curl.setopt(pycurl.FORBID_REUSE,True)
self._curl.setopt(pycurl.WRITEFUNCTION,self.body.write)
self._curl.setopt(pycurl.NOSIGNAL,1)
self._curl.debug=0
def perform(self):
try:
self._curl.perform()
except Exception as e:
#logging.warning(url+"\t" + str(e))
return
def close(self):
try:
self.http_code=self._curl.getinfo(pycurl.HTTP_CODE)
self.total_time=self._curl.getinfo(pycurl.TOTAL_TIME)
self.namelookup_time=self._curl.getinfo(pycurl.NAMELOOKUP_TIME)
self.connect_time=self._curl.getinfo(pycurl.CONNECT_TIME)-self._curl.getinfo(pycurl.NAMELOOKUP_TIME)
self.appconnect_time=max(0,(self._curl.getinfo(pycurl.APPCONNECT_TIME) - self._curl.getinfo(pycurl.CONNECT_TIME)))
self.pretransfer_time=self._curl.getinfo(pycurl.PRETRANSFER_TIME) - max(self._curl.getinfo(pycurl.APPCONNECT_TIME),self._curl.getinfo(pycurl.CONNECT_TIME))
self.starttransfer_time=self._curl.getinfo(pycurl.STARTTRANSFER_TIME) - self._curl.getinfo(pycurl.PRETRANSFER_TIME)
self.redirect_time=max(0,self._curl.getinfo(pycurl.REDIRECT_TIME) - self._curl.getinfo(pycurl.TOTAL_TIME))
self.speed_download=self._curl.getinfo(pycurl.SPEED_DOWNLOAD)
except Exception as e:
#logging.warning(url+"\t"+str(e))
self.http_code=0
self.total_time=0
self.namelookup_time=0
self.connect_time=0
self.appconnect_time=0
self.pretransfer_time=0
self.starttransfer_time=0
self.redirect_time=0
self.speed_download=0
self._curl.close()
queue=Queue.Queue()
websites=[]
tmpfile='/tmp/check_url_items.txt'
for line in urls:
line=line.strip()
if not line or line[0] == "#":
continue
name,url=line.split()
element={'{#WEBSITE_NAME}':name,
'{#WEBSITE_URL}':url
}
websites.append(element)
#logging.debug('Discovered website ' + name + '\t' + url)
queue.put((name,url))
assert queue.queue, "no urls are given"
num_urls=len(queue.queue)
#num_conn=min(num_conn,num_urls)
#num_conn=num_urls
#assert 1 <= num_conn < = 1000,"invalid number of concurrent connections"
class Get_url_data:
def __init__(self,queue):
self.queue=queue
def run(self):
try:
name,url=self.queue.get_nowait()
except Queue.Empty:
raise SystemExit
c=Curl(url)
c.perform()
c.close()
for item in [ 'http_code','total_time','namelookup_time','connect_time','appconnect_time','pretransfer_time','starttransfer_time','redirect_time','speed_download' ]:
key='website[{0},{1},{2}]'.format(name,url,item)
if item=='http_code':
value=c.http_code
elif item=='total_time':
value=c.total_time
elif item=='namelookup_time':
value=c.namelookup_time
#print key+":"+str(value)
elif item=='connect_time':
value=c.connect_time
elif item=='appconnect_time':
value=c.appconnect_time
elif item=='pretransfer_time':
value=c.pretransfer_time
elif item=='starttransfer_time':
value=c.starttransfer_time
elif item=='redirect_time':
value=c.redirect_time
elif item=='speed_download':
value=c.speed_download
f=open(tmpfile,'a')
f.write("- %s %s\n" % (key, value))
def send_zabbix_data(tmpfile):
'''Send the queue data to Zabbix.'''
'''Get key value from temp file. '''
args = '/opt/app/zabbix/sbin/zabbix_sender -c {0} -i {1} -vv'
return_code = 0
process = subprocess.Popen(args.format(zabbix_conf, tmpfile),
shell=True, stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
out, err = process.communicate()
#print out
#logging.debug("Finished sending data")
return_code = process.wait()
#logging.info("Found return code of " + str(return_code))
#if return_code != 0:
# logging.warning(out)
# logging.warning(err)
#else:
# logging.debug(err)
# logging.debug(out)
#print return_code
#print len(open(tmpfile).readlines())
#for line in open(tmpfile).readlines():
# print line
def main():
try:
if sys.argv[1] and sys.argv[2]=="list_websites":
print json.dumps({'data': websites},indent=4,separators=(',',':'))
elif sys.argv[1] and sys.argv[2]=="send_data":
if os.path.isfile(tmpfile):
#delete tmpfile first
os.unlink(tmpfile)
#print num_urls
for dummy in range(num_urls):
#print dummy
t=Get_url_data(queue)
t.run()
#for line in urls:
# line=line.strip()
# if not line or line[0] == "#":
# continue
# name,url=line.split()
# c=Curl(url)
# c.perform()
# c.close()
# print url+"\t"+str(c.http_code)+"\t"+str(c.namelookup_time)
print "sending zabbix data"
send_zabbix_data(tmpfile)
else:
print "Usage: %s check_urls.txt (list_websites|send_data)" %sys.argv[0]
raise SystemExit
except:
raise SystemExit
if __name__=='__main__':
main()添加定时任务
*/3 * * * * /usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt send_data
添加zabbix配置文件 zabbix_agentd.conf.d/check_urls.conf
UserParameter=website.discovery,/usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt list_websites #UserParameter=website.data,/usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt send_data UserParameter=website[*],/usr/bin/python /opt/app/zabbix/sbin/check_urls.py /opt/app/zabbix/sbin/check_urls.txt send_data
三 制作Zabbix模板
模板参见附件
参考文档：
http://john88wang.blog.51cto.com/
http://john88wang.blog.51cto.com/2165294/1665253
附件：http://down.51cto.com/data/2368054
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- Python中用pycurl监控http响应时间脚本分享
- Python的pycurl包用法简介
- Python基于PycURL自动处理cookie的方法
- python中pycurl库的用法实例
- Python基于PycURL实现POST的方法
- centos安装pycurl出现src/module.c:723: error: ‘CURLPROTO_*’ undeclared错误的解决办法
- virtualenv下安装pycurl
- pycurl https error: unable to get local issuer certificate
- windows10下使用pyopenssl, pycurl 访问https网站(python)
- PycURL: ImportError: pycurl: libcurl link-time ssl backend (nss) is different from compile-time ssl
- [日常开发记录] pycurl python3 error(23, 'Failed writing body (0 != 456)') 解决
- 一个pycurl传header的例子
- Fatal Python error: pycurl: libcurl link-time version is older than compile-time version
- nagios和pycurl的超时时间
- 使用pip来管理python包
- Zabbix使用Pycurl模块监控web页面状态
- Fatal Python error: pycurl: libcurl link-time version is older than compile-time version
- 使用pycurl探测web服务质量
- pycurl安装问题