STM32 用定时器产生1Mhz 脉冲，

STM32 用定时器产生1Mhz 脉冲，PWM宽度可调，四路输出

源码：记得要加入文件 gpio rcc tim 等c文件

#include "stm32f10x_conf.h"

void GPIO_CFG(void);

void RCC_CFG(void);

void TIM_CFG(void);

void NVIC_Configuration(void);

int main (void)

{

RCC_CFG();

NVIC_Configuration();

GPIO_CFG();

TIM_CFG();

TIM_Cmd(TIM3,ENABLE);

TIM_CtrlPWMOutputs(TIM3,ENABLE);

//while(1);

}

void RCC_CFG(void)

{

SystemInit();

RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB,ENABLE);

RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3,ENABLE);

}

void GPIO_CFG(void)

{

GPIO_InitTypeDef GPIO_InitStructure;

GPIO_InitStructure.GPIO_Pin=GPIO_Pin_6|GPIO_Pin_7;

GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;

GPIO_InitStructure.GPIO_Mode=GPIO_Mode_AF_PP;

GPIO_Init(GPIOA,&GPIO_InitStructure);

GPIO_InitStructure.GPIO_Pin=GPIO_Pin_0|GPIO_Pin_1;

GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;

GPIO_InitStructure.GPIO_Mode=GPIO_Mode_AF_PP;

GPIO_Init(GPIOB,&GPIO_InitStructure);

}

void TIM_CFG(void)

{

TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;

TIM_OCInitTypeDef TIM_OCInitStructure;

// TIM_Period 计数值，比如 TIM_Period=17 分频参数 TIM_Prescaler=3 （0为不分频），APB1 时钟是72Mhz，

//在本参数情况下， 72Mhz/（17+1）/（3+1）= 1Mhz

// 理论最大频率是 72/(1+1)/1=36Mhz TIM_Period=1 TIM_Prescaler=0 ,产生的方波可能是三角形的，用模拟示波器才能看出来，数字逻辑分析仪看不错，

// 5Mhz以内的方波应该没问题，如果要产生高频率的方波，感觉应该用SPI的数据时钟来实现

TIM_TimeBaseStructure.TIM_Period=17; // TIM_Period=70; TIM_Prescaler=0; 输出1Mhz时钟

TIM_TimeBaseStructure.TIM_Prescaler=3;

TIM_TimeBaseStructure.TIM_ClockDivision=0x00;

TIM_TimeBaseStructure.TIM_CounterMode=TIM_CounterMode_Up;

TIM_TimeBaseStructure.TIM_RepetitionCounter=0x00;

TIM_TimeBaseInit(TIM3,&TIM_TimeBaseStructure);

TIM_OCInitStructure.TIM_OCMode=TIM_OCMode_PWM1;

TIM_OCInitStructure.TIM_OCPolarity=TIM_OCPolarity_High;

TIM_OCInitStructure.TIM_OutputState=TIM_OutputState_Enable;

// TIM_Pulse的值不可大于TIM_Period

TIM_OCInitStructure.TIM_Pulse=60; //PA.6

TIM_OC1Init(TIM3,&TIM_OCInitStructure);

TIM_OCInitStructure.TIM_Pulse=35; //PA.7

TIM_OC2Init(TIM3,&TIM_OCInitStructure);

TIM_OCInitStructure.TIM_Pulse=18; //PB.0

TIM_OC3Init(TIM3,&TIM_OCInitStructure);

TIM_OCInitStructure.TIM_Pulse=9; //PB.1

TIM_OC4Init(TIM3,&TIM_OCInitStructure);

}

//配置中断向量表。决定将程序下载到RAM中还是FLASH中。

void NVIC_Configuration(void)

{

#ifdef VECT_TAB_RAM

/* Set the Vector Table base location at 0x20000000 */

NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);

#else /* VECT_TAB_FLASH */

/* Set the Vector Table base location at 0x08000000 */

NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);

#endif

}