zabbix监控php-fpm模板

客户端配置：

vim /usr/local/php/etc/php-fpm.d/www.conf 开启状态

将pm.status_path = /phpfpmstatus前的#号注释掉
/etc/init.d/php-fpm restart

同样在客户端开启nginx.conf里面的php-status状态

server {

listen 80;
server_name  _;
root /dev/null;
location /nginx-status {
# Enable nginx status
stub_status on;
# I do not need logs
access_log   off;
allow 10.0.0.0/8;
allow 127.0.0.1;
deny all;
}
location /phpfpmstatus {
fastcgi_pass   127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
# I do not need logs
access_log   off;
allow 127.0.0.1;
allow 10.0.0.0/8;
deny all;
}
}
nginx -t&&nginx -s reload

mkdir -p /etc/zabbix/monitor_scripts/ && cd /etc/zabbix/monitor_scripts/

上传下载好的php-fpm_status.pl，chmod +x php-fpm_status.pl

cat /etc/zabbix/zabbix_agentd.d/php_fpm.conf
UserParameter=php.conn,/etc/zabbix/monitor_scripts/php-fpm_status.pl|cut -f1|cut -d" " -f3
UserParameter=php.idle,/etc/zabbix/monitor_scripts/php-fpm_status.pl|cut -f2|cut -d" " -f3
UserParameter=php.active,/etc/zabbix/monitor_scripts/php-fpm_status.pl|cut -f3|cut -d" " -f3
UserParameter=php.total,/etc/zabbix/monitor_scripts/php-fpm_status.pl|cut -f4|cut -d" " -f3
UserParameter=php.maxchildren,/etc/zabbix/monitor_scripts/php-fpm_status.pl|cut -f5|cut -d" " -f3

/etc/init.d/zabbix-agent restart

在web中导入模板，可以在监控端测试一下zabbix_get -s 192.168.0.0 -k "php.conn"有数据就等出图了。。。。。