华三路由交换-H3C配置Comsole和Telnet登录密码_v1
2017-11-22 14:07
471 查看
允许转载,但必须注明出版处与原文链接,否则追究其法律责任,谢谢合作!
华三路由交换-H3C配置Comsole和Telnet登录密码_v1
【设置Console 接口密码】
步骤一、进入Console 接口配置。
[H3C]user-interface console 0
步骤二、把认证模式设置为密码认证并配置密码。
[H3C-line-console0]authentication-mode password
[H3C-line-console0]set authentication password simple password
步骤三、配置接口权限级别(0-15)。
[H3C-line-console0]user-role level-0
结果截图
【配置telnet 远程登录】
步骤一、创建远程VTY接口,指向scheme(AAA) 认证
[H3C]user-interface vty 0 4
authentication-mode scheme (AAA)
[H3C]local-user user
[H3C-luser-manage-xcw]password simple password
[H3C-luser-manage-xcw]service-type telnet
华三路由交换-H3C配置Comsole和Telnet登录密码_v1
【设置Console 接口密码】
步骤一、进入Console 接口配置。
[H3C]user-interface console 0
步骤二、把认证模式设置为密码认证并配置密码。
[H3C-line-console0]authentication-mode password
[H3C-line-console0]set authentication password simple password
步骤三、配置接口权限级别(0-15)。
[H3C-line-console0]user-role level-0
结果截图
【配置telnet 远程登录】
步骤一、创建远程VTY接口,指向scheme(AAA) 认证
[H3C]user-interface vty 0 4
authentication-mode scheme (AAA)
[H3C]local-user user
[H3C-luser-manage-xcw]password simple password
[H3C-luser-manage-xcw]service-type telnet
相关文章推荐
- H3C交换、路由配置命令大全
- H3C交换、路由配置命令
- H3C 路由器配置console密码登录[学习]
- H3C S3600-SI 配置学习1---telnet登录配置
- 路由、交换如何Telnet远程配置。
- h3c 3600 交换机配置Telnet登录
- 路由交换设备的密码配置与远程管理
- H3C配置ssh密码认证登录
- 路由交换技术之telnet登录
- H3C F1000-S防火墙基础配置及telnet登录!
- 路由交换技术之telnet登录
- H3C_配置交换机密码/交换机IP/网关/web、telnet用户
- H3C S3100交换机SSH登录配置(公钥+密码认证)
- linux rsh配置 A主机无需密码登录B主机
- ssh配置无密码登录,以及配置完不能登录的解决方法
- telnet的基本配置(cisco、H3C、huawei 三个例子)
- H3C交换机、路由器Console和Telnet密码配置
- centos ssh配置无密码登录