An Intuitive Explanation of Convolutional Neural Networks

Skip to content

the data science blog

machine learning, deep learning, nlp, data science

Menu

About

The Data Science Blog

Reading Material

Contact Me

An Intuitive Explanation of Convolutional Neural Networks

Posted on
August 11, 2016May 29, 2017 by
ujjwalkarn

What are Convolutional Neural Networks and why are they important?

Convolutional Neural Networks (ConvNets or
CNNs) are a category of
Neural Networks that have proven very effective in areas such as image recognition and classification. ConvNets have been successful in identifying faces, objects and traffic signs apart from powering vision in robots and self driving cars.



Figure 1: Source [1]
In Figure 1 above, a ConvNet is able to recognize scenes and the system is able to suggest relevant captions (“a soccer player is kicking a soccer ball”) while
Figure 2 shows an example of ConvNets being used for recognizing everyday objects, humans and animals. Lately, ConvNets have been effective in several Natural Language Processing tasks (such as sentence classification) as well.



Figure 2: Source [2]
ConvNets, therefore, are an important tool for most machine learning practitioners today. However, understanding ConvNets and learning to use them for the first time can sometimes be an intimidating experience. The primary purpose
of this blog post is to develop an understanding of how Convolutional Neural Networks work on images.
If you are new to neural networks in general, I would recommend reading

this short tutorial on Multi Layer Perceptrons to get an idea about how they work, before proceeding. Multi Layer Perceptrons are referred to as “Fully Connected Layers” in this post.

The LeNet Architecture (1990s)

LeNet was one of the very first convolutional neural networks which helped propel the field of Deep Learning. This pioneering work by Yann LeCun was named
LeNet5 after many previous successful iterations since the year 1988 [3].
At that time the LeNet architecture was used mainly for character recognition tasks such as reading zip codes, digits, etc.
Below, we will develop an intuition of how the LeNet architecture learns to recognize images. There have been several new architectures proposed in the recent years which are improvements over the LeNet, but they all use the main
concepts from the LeNet and are relatively easier to understand if you have a clear understanding of the former.



Figure 3: A simple ConvNet. Source [5]
The Convolutional Neural Network in Figure 3 is similar in architecture to the original LeNet and classifies an input image into four categories: dog, cat, boat or bird (the original LeNet was used mainly for character
recognition tasks). As evident from the figure above, on receiving a boat image as input, the network correctly assigns the highest probability for boat (0.94) among all four categories. The sum of all probabilities in the output layer should be one (explained
later in this post).
There are four main operations in the ConvNet shown in
Figure 3 above:
Convolution
Non Linearity (ReLU)
Pooling or Sub Sampling
Classification (Fully Connected Layer)
These operations are the basic building blocks of
every Convolutional Neural Network, so understanding how these work is an important step to developing a sound understanding of ConvNets. We will try to understand the intuition behind each of these operations below.

An Image is a matrix of pixel values

Essentially, every image can be represented as a matrix of pixel values.



Figure 4: Every image is a matrix of pixel values. Source [6]
Channel is a conventional term used to refer to a certain component of an image. An image from a standard
digital camera will have three channels – red, green and blue – you can imagine those as three 2d-matrices stacked over each other (one for each color), each having pixel values in the range 0 to 255.
A grayscale image, on the other hand, has just one channel. For the purpose of this post, we will only consider grayscale images, so we will
have a single 2d matrix representing an image. The value of each pixel in the matrix will range from 0 to 255 – zero indicating black and 255 indicating white.

The Convolution Step

ConvNets derive their name from the “convolution” operator. The primary purpose of Convolution in case of a ConvNet is to extract features from the input image. Convolution
preserves the spatial relationship between pixels by learning image features using small squares of input data. We will not go into the mathematical details of Convolution here, but will try to understand how it works over images.
As we discussed above, every image c
4000
an be considered as a matrix of pixel values. Consider a 5 x 5 image whose pixel values are only 0 and 1 (note that for a grayscale image, pixel values range from 0 to 255, the green matrix below
is a special case where pixel values are only 0 and 1):



Also, consider another 3 x 3 matrix as shown below:



Then, the Convolution of the 5 x 5 image and the 3 x 3 matrix can be computed as shown in the animation in
Figure 5 below:


Figure 5: The Convolution operation. The output matrix is called Convolved Feature or Feature Map. Source [7]
Take a moment to understand how the computation above is being done. We slide the orange matrix over our original image (green) by 1 pixel (also called ‘stride’) and for every position, we compute element wise multiplication (between
the two matrices) and add the multiplication outputs to get the final integer which forms a single element of the output matrix (pink). Note that the 3×3 matrix “sees” only a part of the input image in each stride.
In CNN terminology, the 3×3 matrix is called a ‘filter‘ or ‘kernel’ or ‘feature detector’ and the matrix formed by sliding the filter over the image and computing the dot product is called the ‘Convolved Feature’
or ‘Activation Map’ or the ‘Feature Map‘. It is important to note that filters acts as feature detectors from the original input image.
It is evident from the animation above that different values of the filter matrix will produce different Feature Maps for the same input image. As an example, consider the following input image:



In the table below, we can see the effects of convolution of the above image with different filters. As shown, we can perform operations such as Edge Detection, Sharpen and Blur just by changing the numeric values of our filter
matrix before the convolution operation [8] – this means that different filters can detect different features from an image, for
example edges, curves etc. More such examples are available in Section 8.2.4 here.



Another good way to understand the Convolution operation is by looking at the animation in
Figure 6 below:



Figure 6: The Convolution Operation. Source [9]
A filter (with red outline) slides over the input image (convolution operation) to produce a feature map. The convolution of another filter (with the green outline), over the same image gives a different feature map as shown. It
is important to note that the Convolution operation captures the local dependencies in the original image. Also notice how these two different filters generate different feature maps from the same original image. Remember that the image and the two filters
above are just numeric matrices as we have discussed above.
In practice, a CNN learns the values of these filters on its own during the training process (although we still need to specify parameters such as
number of filters,
filter size, architecture of the network etc. before the training process). The more number of filters we have, the more image features get extracted and the better our network becomes at recognizing patterns
in unseen images.
The size of the Feature Map (Convolved Feature) is controlled by three parameters [4] that we need to decide
before the convolution step is performed:
Depth: Depth corresponds to the number of filters we use for the convolution operation. In the network shown in Figure 7, we are performing convolution of the original boat image using three distinct
filters, thus producing three different feature maps as shown. You can think of these three feature maps as stacked 2d matrices, so, the ‘depth’ of the feature map would be three.



Figure 7
Stride: Stride is the number of pixels by which we slide our filter matrix over the input matrix. When the stride is 1 then we move the filters one pixel at a time. When the stride is 2, then
the filters jump 2 pixels at a time as we slide them around. Having a larger stride will produce smaller feature maps.
Zero-padding: Sometimes, it is convenient to pad the input matrix with zeros around the border, so that we can apply the filter to bordering elements of our input image matrix. A nice feature of zero padding is
that it allows us to control the size of the feature maps. Adding zero-padding is also called
wide convolution, and not using zero-padding would be a narrow convolution. This has been explained clearly in [14].

Introducing Non Linearity (ReLU)

An additional operation called ReLU has been used after every Convolution operation in
Figure 3 above. ReLU stands for Rectified Linear Unit and is a non-linear operation. Its output is given by:



Figure 8: the ReLU operation
ReLU is an element wise operation (applied per pixel) and replaces all negative pixel values in the feature map by zero. The purpose of ReLU is to introduce non-linearity in our ConvNet, since most of the real-world data we would
want our ConvNet to learn would be non-linear (Convolution is a linear operation – element wise matrix multiplication and addition, so we account for non-linearity by introducing a non-linear function like ReLU).
The ReLU operation can be understood clearly from
Figure 9 below. It shows the ReLU operation applied to one of the feature maps obtained in
Figure 6 above. The output feature map here is also referred to as the ‘Rectified’ feature map.



Figure 9: ReLU operation. Source [10]
Other non linear functions such as tanh or sigmoid can also be used instead of ReLU, but ReLU has been found to perform better in most situations.

The Pooling Step

Spatial Pooling (also called subsampling or downsampling) reduces the dimensionality of each feature map but retains the most important information. Spatial Pooling can be of different types: Max, Average, Sum etc.
In case of Max Pooling, we define a spatial neighborhood (for example, a 2×2 window) and take the largest element from the rectified feature map within that window. Instead of taking the largest element we could also take the average
(Average Pooling) or sum of all elements in that window. In practice, Max Pooling has been shown to work better.
Figure 10 shows an example of Max Pooling operation on a Rectified Feature map (obtained after convolution + ReLU operation) by using a 2×2 window.



Figure 10: Max Pooling. Source [4]
We slide our 2 x 2 window by 2 cells (also called ‘stride’) and take the maximum value in each region. As shown in
Figure 10, this reduces the dimensionality of our feature map.
In the network shown in Figure 11, pooling operation is applied separately to each feature map (notice that, due to this, we get three output maps from three input maps).



Figure 11: Pooling applied to Rectified Feature Maps
Figure 12 shows the effect of Pooling on the Rectified Feature Map we received after the ReLU operation in
Figure 9 above.



Figure 12: Pooling. Source [10]
The function of Pooling is to progressively reduce the spatial size of the input representation [4]. In particular,
pooling
makes the input representations (feature dimension) smaller and more manageable
reduces the number of parameters and computations in the network, therefore, controlling

overfitting [4]
makes the network invariant to small transformations, distortions and translations in the input image (a small distortion in input will not change the output of Pooling – since we take the maximum / average value in a local neighborhood).
helps us arrive at an almost scale invariant representation of our image (the exact term is “equivariant”). This is very powerful since we can detect objects in an image no matter where they are located (read [18]
and [19] for details).

Story so far

Figure 13
So far we have seen how Convolution, ReLU and Pooling work. It is important to understand that these layers are the basic building blocks of any CNN. As shown in
Figure 13, we have two sets of Convolution, ReLU & Pooling layers – the 2nd Convolution layer performs convolution on the output of the first Pooling Layer using six filters to produce a total of six feature maps. ReLU is then applied individually
on all of these six feature maps. We then perform Max Pooling operation separately on each of the six rectified feature maps.
Together these layers extract the useful features from the images, introduce non-linearity in our network and reduce feature dimension while aiming to make the features somewhat equivariant to scale and translation [18].
The output of the 2nd Pooling Layer acts as an input to the Fully Connected Layer, which we will discuss in the next section.

Fully Connected Layer

The Fully Connected layer is a traditional Multi Layer Perceptron that uses a softmax activation function in the output layer (other classifiers like SVM can also be used, but will stick to softmax in this post). The term “Fully
Connected” implies that every neuron in the previous layer is connected to every neuron on the next layer. I recommend

reading this post if you are unfamiliar with Multi Layer Perceptrons.
The output from the convolutional and pooling layers represent high-level features of the input image. The purpose of the Fully Connected layer is to use these features for classifying the input image into various classes based
on the training dataset. For example, the image classification task we set out to perform has four possible outputs as shown in
Figure 14 below (note that Figure 14 does not show connections between the nodes in the fully connected layer)



Figure 14: Fully Connected Layer -each node is connected to every other node in the adjacent layer
Apart from classification, adding a fully-connected layer is also a (usually) cheap way of learning non-linear combinations of these features. Most of the features from convolutional and pooling layers may be good for the classification
task, but combinations of those features might be even better [11].
The sum of output probabilities from the Fully Connected Layer is 1. This is ensured by using the

Softmax as the activation function in the output layer of the Fully Connected Layer. The Softmax function takes a vector of arbitrary real-valued scores and squashes it to a vector of values between zero and one that sum to one.

Putting it all together – Training using Backpropagation

As discussed above, the Convolution + Pooling layers act as Feature Extractors from the input image while Fully Connected layer acts as a classifier.
Note that in Figure 15 below, since the input image is a boat, the target probability is 1 for Boat class and 0 for other three classes, i.e.
Input Image = Boat
Target Vector = [0, 0, 1, 0]



Figure 15: Training the ConvNet
The overall training process of the Convolution Network may be summarized as below:
Step1: We initialize all filters and parameters / weights with random values
Step[b]2: [/b]The network takes a training image as input, goes through the forward propagation step (convolution, ReLU and pooling operations along with forward propagation in the Fully Connected layer)
and finds the output probabilities for each class.
Lets say the output probabilities for the boat image above are [0.2, 0.4, 0.1, 0.3]
Since weights are randomly assigned for the first training example, output probabilities are also random.

Step3: Calculate the total error at the output layer (summation over all 4 classes)
 Total Error = ∑  ½ (target probability – output probability) ²

Step4: Use Backpropagation to calculate the
gradients of the error with respect to all weights in the network and use
gradient descent to update all filter values / weights and parameter values to minimize the output error.
The weights are adjusted in proportion to their contribution to the total error.
When the same image is input again, output probabilities might now be [0.1, 0.1, 0.7, 0.1], which is closer to the target vector [0, 0, 1, 0].
This means that the network has learnt to classify this particular image correctly by adjusting its weights / filters such that the output error is reduced.
Parameters like number of filters, filter sizes, architecture of the network etc. have all been fixed before Step 1 and do not change during training process – only the values of the filter matrix and connection weights get updated.

Step5: Repeat steps 2-4 with all images in the training set.
The above steps train the ConvNet – this essentially means that all the weights and parameters of the ConvNet have now been optimized to correctly classify images from the training set.
When a new (unseen) image is input into the ConvNet, the network would go through the forward propagation step and output a probability for each class (for a new image, the output probabilities are calculated using the weights
which have been optimized to correctly classify all the previous training examples). If our training set is large enough, the network will (hopefully) generalize well to new images and classify them into correct categories.
Note 1: The steps above have been oversimplified and mathematical details have been avoided to provide intuition into the training process. See [4]
and [12] for a mathematical formulation and thorough understanding.
Note 2: In the example above we used two sets of alternating Convolution and Pooling layers. Please note however, that these operations can be repeated any number of times in a single ConvNet. In fact, some of
the best performing ConvNets today have tens of Convolution and Pooling layers! Also, it is not necessary to have a Pooling layer after every Convolutional Layer. As can be seen in the
Figure 16 below, we can have multiple Convolution + ReLU operations in succession before having a Pooling operation. Also notice how each layer of the ConvNet is visualized in the Figure 16 below.



Figure 16: Source [4]

Visualizing Convolutional Neural Networks

In general, the more convolution steps we have, the more complicated features our network will be able to learn to recognize. For example, in Image Classification a ConvNet may learn to detect
edges from raw pixels in the first layer, then use the edges to detect simple shapes in the second layer, and then use these shapes to deter higher-level features, such as facial shapes in higher layers [14].
This is demonstrated in Figure 17 below – these features were learnt using a Convolutional Deep
Belief Network and the figure is included here just for demonstrating the idea (this is only an example: real life convolution filters may detect objects that have no meaning to humans).



Figure 17: Learned features from a Convolutional Deep Belief Network. Source [21]
Adam Harley created amazing visualizations of a Convolutional Neural Network trained on the MNIST Database of handwritten digits
[13]. I highly recommend

playing around with it to understand details of how a CNN works.
We will see below how the network works for an input ‘8’. Note that the visualization in
Figure 18 does not show the ReLU operation separately.



Figure 18: Visualizing a ConvNet trained on handwritten digits. Source [13]
The input image contains 1024 pixels (32 x 32 image) and the first Convolution layer (Convolution Layer 1) is formed by convolution of six unique 5 × 5 (stride 1) filters with the input image. As seen, using six different filters
produces a feature map of depth six.
Convolutional Layer 1 is followed by Pooling Layer 1 that does 2 × 2 max pooling (with stride 2) separately over the six feature maps in Convolution Layer 1. You can move your mouse pointer over any pixel in the Pooling Layer and observe
the 2 x 2 grid it forms in the previous Convolution Layer (demonstrated in
Figure 19). You’ll notice that the pixel having the maximum value (the brightest one) in the 2 x 2 grid makes it to the Pooling layer.



Figure 19: Visualizing the Pooling Operation. Source [13]
Pooling Layer 1 is followed by sixteen 5 × 5 (stride 1) convolutional filters that perform the convolution operation. This is followed by Pooling Layer 2 that does 2 × 2 max pooling (with stride 2). These two layers use the same
concepts as described above.
We then have three fully-connected (FC) layers. There are:
120 neurons in the first FC layer
100 neurons in the second FC layer
10 neurons in the third FC layer corresponding to the 10 digits – also called the Output layer
Notice how in Figure 20, each of the 10 nodes in the output layer are connected to all 100 nodes in the 2nd Fully Connected layer (hence the name Fully Connected).
Also, note how the only bright node in the Output Layer corresponds to ‘8’ – this means that the network correctly classifies our handwritten digit (brighter node denotes that the output from it is higher, i.e. 8 has the highest
probability among all other digits).



Figure 20: Visualizing the Filly Connected Layers. Source [13]
The 3d version of the same visualization is available

here.

Other ConvNet Architectures

Convolutional Neural Networks have been around since early 1990s. We discussed the LeNet above which was one of the very first convolutional neural networks. Some other influential architectures are listed below
[3] [4].
LeNet (1990s): Already covered in this article.
1990s to 2012: In the years from late 1990s to early 2010s convolutional neural network were in incubation. As more and more data and computing power became available, tasks that convolutional neural networks could tackle became more and
more interesting.
AlexNet (2012) – In 2012, Alex Krizhevsky (and others) released

AlexNet which was a deeper and much wider version of the LeNet and won by a large margin the difficult ImageNet Large Scale Visual Recognition Challenge (ILSVRC) in 2012. It was a significant breakthrough with respect to the previous approaches and the current
widespread application of CNNs can be attributed to this work.
ZF Net (2013) – The ILSVRC 2013 winner was a Convolutional Network from Matthew Zeiler and Rob Fergus. It became known as the
ZFNet (short for Zeiler & Fergus Net). It was an improvement on AlexNet by tweaking the architecture hyperparameters.
GoogLeNet (2014) – The ILSVRC 2014 winner was a Convolutional Network from
Szegedy et al. from Google. Its main contribution was the development of an
Inception Module that dramatically reduced the number of parameters in the network (4M, compared to AlexNet with 60M).
VGGNet (2014) – The runner-up in ILSVRC 2014 was the network that became known as the
VGGNet. Its main contribution was in showing that the depth of the network (number of layers) is a critical component for good performance.
ResNets (2015) – Residual Network developed by Kaiming He (and others) was the winner of ILSVRC 2015. ResNets are currently by far state of the art
Convolutional Neural Network models and are the default choice for using ConvNets in practice (as of May 2016).
DenseNet (August 2016) – Recently published by Gao Huang (and others), the Densely Connected Convolutional Network has
each layer directly connected to every other layer in a feed-forward fashion. The DenseNet has been shown to obtain significant improvements over previous state-of-the-art architectures on five highly competitive object recognition benchmark tasks. Check out
the Torch implementation
here.

Conclusion

In this post, I have tried to explain the main concepts behind Convolutional Neural Networks in simple terms. There are several details I have oversimplified / skipped, but hopefully this post gave you some intuition around how
they work.
This post was originally inspired from Understanding Convolutional Neural Networks
for NLP by Denny Britz (which I would recommend reading) and a number of explanations here are based on that post. For a more thorough understanding of some of these concepts, I would encourage you to go through the

notes from
Stanford’s course on ConvNets as well as other excellent resources mentioned under References below. If you face any issues understanding any of the above concepts or have questions / suggestions, feel free to leave a comment below.
All images and animations used in this post belong to their respective authors as listed in References section below.

References

karpathy/neuraltalk2: Efficient Image Captioning code in Torch,

Examples
Shaoqing Ren, et al, “Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks”, 2015, arXiv:1506.01497 
Neural Network Architectures, Eugenio Culurciello’s blog
CS231n Convolutional Neural Networks for Visual Recognition, Stanford
Clarifai / Technology
Machine Learning is Fun! Part
3: Deep Learning and Convolutional Neural Networks
Feature extraction using convolution, Stanford
Wikipedia article on Kernel (image processing) 
Deep Learning Methods for Vision, CVPR 2012 Tutorial 
Neural Networks by Rob Fergus, Machine Learning Summer School 2015
What do the fully connected layers do in CNNs? 
Convolutional Neural Networks, Andrew Gibiansky 
A. W. Harley, “An Interactive Node-Link Visualization of Convolutional Neural Networks,” in ISVC, pages 867-877, 2015 (link).

Demo
Understanding Convolutional Neural Networks for NLP
Backpropagation in Convolutional Neural Networks
A Beginner’s Guide To Understanding
Convolutional Neural Networks
Vincent Dumoulin, et al, “A guide to convolution arithmetic for deep learning”, 2015,

arXiv:1603.07285
What is the difference between deep learning and
usual machine learning?
How is a convolutional neural network able to learn invariant features?
A Taxonomy of Deep Convolutional Neural Nets for Computer Vision
Honglak Lee, et al, “Convolutional Deep Belief Networks for Scalable Unsupervised Learning of Hierarchical Representations” (link)

Share this:

Tweet

Related

Posted in

Deep Learning

Post navigation

A Quick Introduction to Neural Networks

111 thoughts on “An Intuitive Explanation of Convolutional Neural Networks”

Comment navigation

← Older Comments


Dmitri says:
March 19, 2017 at 6:18 pm

Amazing article. Thank you

LikeLiked
by 1 person

Reply


Gautam
says:
March 21, 2017 at 3:33 pm

Nice article. Thank you

LikeLike

Reply


mital says:
March 24, 2017 at 2:28 am

Are you sure the max pooling example is right?(screen-shot-2016-08-07-at-6-11-53-pm.png). There is no black Relu feature map but a lot after max pooling. The max pooling cannot create darker images than the original, right?

LikeLike

Reply


VideoPortal
says:
March 29, 2017 at 1:25 am

___123___An Intuitive Explanation of Convolutional Neural Networks – the data science blog___123___

LikeLike

Reply


Kevin says:
March 30, 2017 at 9:49 am

A very very nice article.Thank you!

LikeLike

Reply


nnitsew
says:
April 2, 2017 at 2:01 am

Thank you for your article.

LikeLike

Reply


Dishan Gunawardana
says:
April 14, 2017 at 10:25 pm

Your explanation is very easy for a beginner to follow. Great job!

LikeLike

Reply


Adwaith Gupta
says:
April 21, 2017 at 10:19 am

Good detailed explanation. Anybody getting bogged down with the mathematical details of the matrix dimensions in CNN, please read the following:
https://www.adwaithgupta.com/blog

And, do not forget to subscribe there