树莓派USB摄像头与camera模块对比
2016-10-14 13:36
483 查看
http://www.cnblogs.com/weixinforspurs/p/5575962.html
——————————————————————————————————————————————————————————————————
I started this thread to let people know that some USB webcams do work with the Raspberry Pi, and in some cases may be a fit for your requirements. The camera board is a great product, and no doubt will get even better as the software matures, but based on your requirements, may or not be the best choice.
Camera Board Pros:
Software utilizes RPi GPU, so for example encoding h.264 video has low impact on CPU usage.
Excellent resolution (higher than most USB webcams) and excellent daytime image quality.
You are supporting an open source hardware project, and potentially encouraging future improvements.
Camera Board Cons:
Short, fragile, and inflexible ribbon cable. Camera board is best
when camera will be mounted in the same box as the Raspberry Pi (or
close by), ideally with everything but the lens internal to the box.
No mounting hardware - you need to come up with something there (AdaFruit does sell a simple, fixed mounting bracket).
USB WebCam Board Pros:
Most have some sort of ball-head type mounting, which allows you to re-position the camera as needed.
Longer, flexible USB cable.
Many are supported by Video4Linux, which lets you use it with nice
software like Motion and GStreamer (Note: RPi Camera Board reportedly
now has some Video4Linux support under development).
USB WebCam Board Cons:
Typically slow, low frame rate video.
CPU usage can be quite high.
RPi does not have enough CPU horsepower to do higher frame rates,
resolution, or advanced video compression. The Logitech C920 supports
high frame rate hardware (in-camera) H.264 video encoding, but I
experienced issues using this on the Raspberry Pi (may have been power
related, though).
——————————————————————————————————————————————————————————————————
I started this thread to let people know that some USB webcams do work with the Raspberry Pi, and in some cases may be a fit for your requirements. The camera board is a great product, and no doubt will get even better as the software matures, but based on your requirements, may or not be the best choice.
Camera Board Pros:
Software utilizes RPi GPU, so for example encoding h.264 video has low impact on CPU usage.
Excellent resolution (higher than most USB webcams) and excellent daytime image quality.
You are supporting an open source hardware project, and potentially encouraging future improvements.
Camera Board Cons:
Short, fragile, and inflexible ribbon cable. Camera board is best
when camera will be mounted in the same box as the Raspberry Pi (or
close by), ideally with everything but the lens internal to the box.
No mounting hardware - you need to come up with something there (AdaFruit does sell a simple, fixed mounting bracket).
USB WebCam Board Pros:
Most have some sort of ball-head type mounting, which allows you to re-position the camera as needed.
Longer, flexible USB cable.
Many are supported by Video4Linux, which lets you use it with nice
software like Motion and GStreamer (Note: RPi Camera Board reportedly
now has some Video4Linux support under development).
USB WebCam Board Cons:
Typically slow, low frame rate video.
CPU usage can be quite high.
RPi does not have enough CPU horsepower to do higher frame rates,
resolution, or advanced video compression. The Logitech C920 supports
high frame rate hardware (in-camera) H.264 video encoding, but I
experienced issues using this on the Raspberry Pi (may have been power
related, though).
相关文章推荐
- 树莓派USB摄像头与camera模块对比
- 树莓派新版系统上使用mjpg-streamer获取USB摄像头和树莓派专用摄像头RaspiCamera图像
- 在树莓派(Debian系统)上通过usb摄像头扫描识别QR二维码
- 树莓派 安装摄像头模块
- 树莓派3使用USB摄像头
- 树莓派中测试USB摄像头
- .net中捕获摄像头视频的方式及对比(How to Capture Camera Video via(转)
- Android之USB Camera摄像头节点后移
- 树莓派基于motion的usb摄像头监控
- USB Camera摄像头 UVC 驱动
- 树莓派+普通usb摄像头 做人脸识别
- net 中捕获摄像头视频的方式及对比(How to Capture Camera Video via .Net) (转)
- 玩转树莓派--USB摄像头操作
- 树莓派使用 USB 摄像头做网络监控
- [USBCamera]笔记本上使用该连接的摄像头时就会死机的问题
- 模块[camera]_摄像头的YUV
- 如何安装树莓派摄像头模块
- 树莓派外接USB摄像头系列三
- 树莓派使用USB摄像头和motion实现监控
- 树莓派CSI摄像头模块找不到/dev/video0的问题