vlan 配置

在RedHat上配置vlan：

~]$ [code]modinfo 8021q

DEVICE=ethX.192
BOOTPROTO=none
ONBOOT=yes
IPADDR=192.168.1.1
PREFIX=24
NETWORK=192.168.1.0
VLAN=yes

DEVICE=ethX.192会自动关联到ethx上，如果不能则需要指定

PHYSDEV=ethx

采用cli：

~]# ip link add link eth0 name eth0.8 type vlan id 8

~]$ ip -d link show eth0.8
4: eth0.8@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT
link/ether 52:54:00:ce:5f:6c brd ff:ff:ff:ff:ff:ff promiscuity 0
vlan protocol 802.1Q id 8 <REORDER_HDR>

~]# ip link delete eth0.8