10012---Trail ~ MediaConversion
2016-04-03 02:55
1791 查看
Introduction
We want to connect the stadium type with images as is typically done with products; i.e. the same image has to be available in different formats.For example, a small image for a basket overview, a medium one for search pages, and a large one for details pages.
We provide the basic implementation in this trail. It is a simple task for you to provide the needed images to either the stadium
listing or the stadium details view.
The two different scaled images should be managed with an asset represented by a MediaContainer.
Preparation
If you are using Windows or Linux, the necessary binaries of ImageMagick are already bundeled with the mediaconversion extension,and there's no need for a separate installation for this trail. You need to only check the prerequisites in ImageMagick
- Integration Guide
for ImageMagick. If you are using Mac, you should install ImageMagick; the specific instructions for each operating system
is in ImageMagick - Integration Guide.
Next, enable mediaconversion extension:
Run ant clean all,
and don't forget to update the system including Project data from mediaconversion plus sampledata:
Finally, add the new extension to your Eclipse workspace.
---
Modelling the Stadium asset
As mentioned above, we want to model the asset using a MediaContainer. Logically, a Media Container holds all Media items that are different formats of one particular Media item. Add this new attribute to the Stadium type:<attribute qualifier="stadiumImage" type="MediaContainer" > <persistence type="property"/> </attribute>
Do an ant all and
Sytem update -> Update running system.
MediaContainerand
Mediaare
catalog-aware. We will have to take this into account later.
From
now on, we can assign a MediaContainer to a Stadium (e.g. in the hmc).
But
considering our goal of having different scaled Media for different pages,
we
will have a Controller decide which Media to take from the MediaContainer.
Hence
we have to determine compulsory MediaFormats assigned to the Media inside the MediaContainer.
Media Conversion
Define Media Formats
Go to the hmc and then to the Media section:1.Create
new ConversionFormats
2.One
for the listview.
3.Andd
one for the detailview.
----
=====
Both
ConversionMediaFormats refer to a conversion strategy set up in the Spring configuration. The default value which we will adopt isimageMagickMediaConversionStrategy.
Further we specify the input format for media conversion:
We
take the Working Format as base for other Conversion MediaFormats which
is part of the sampledata.
For
the conversion command, we specify
-resize 100x>and
-resize 1200x>.
In
the former case the format requires a width resizing to 100px in the latter case a resizing to 1200px. Find more information on commands here.
Define a ConversionGroup
A ConversionGroup holds different ConversionMediaFormats.1.Create a new conversion group
2.Add the two conversionFormats
Create Stadium Media Files
Download the following three files and copy them to resources/cuppytrail/media/.The images have a resolution of 1920x1280.
---
Next we need to create Media Items. We do this with ImpEx in the Import Console in the hac.
$catalogVersion=catalogVersion(catalog(id[default='Default']),version[default='Staged'])[unique=true]; INSERT_UPDATE Media;code[unique=true];$catalogVersion; mime;realfilename;mediaFormat(qualifier);@media[translator=de.hybris.platform.impex.jalo.media.MediaDataTranslator][forceWrite=true]; ;beachStadium;;image/jpeg;nature_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/nature_work.jpg; ;cityStadium;;image/jpeg;city_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/city_work.jpg; ;discoStadium;;image/jpeg;nightlife_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/nightlife_work.jpg;
Create a sample MediaContainer
Now it's time to create a MediaContainer (e.g. for a beachstadium) and assign the ConversionGroup and the working Media to it.We will do this again in the hmc:
1.Create a new MediaContainer.
2.Create a beachStadiumContainer.
3.Assign the working media to it.
----
Now we can convert the missing medias. Save the container and click on the Convert missing
medias button.
Repeat the above steps for city (as cityStadiumContainer) and disco (as discoStadiumContainer).
Assign the MediaContainer to a stadium
Before creating a new stadium we should think about the catalog-awareness of the MediaContainer and Media items.The sample MediaContainer from the last section comes from the staged catalog version of our Default catalog. It might be a good idea to assign an online catalog version MediaContainer to a Stadium. Thus we can work on a staging backend without affecting the
frontend. To do so, we synchronize the staging version of the Default catalog:
Select Catalog->Catalog Management Tools->Synchronization from the hmc and click on start:
Now we can add the online Version of our beachStadiumContainer to a stadium.
Create a new stadium beachstadium and
assign the MediaContainer to it.
ImpEx'ing the previous steps
We would now like to manifest the manual configuration we did in the hmc and provide a proper projectdata script. Here it is:$lang=en $catalogVersion=catalogVersion(catalog(id[default='Default']),version[default='Staged'])[unique=true]; INSERT_UPDATE ConversionMediaFormat;qualifier[unique=true];inputFormat(qualifier);conversion ;stadiumListFormat;Default-WorkingFormat;-resize 100x> ;stadiumDetailsFormat;Default-WorkingFormat;-resize 1200x> INSERT_UPDATE ConversionGroup;code[unique=true];supportedFormats(qualifier) ;stadiumConversionGroup;stadiumListFormat,stadiumDetailsFormat INSERT_UPDATE MediaContainer;qualifier[unique=true];$catalogVersion;conversionGroup(code) ;beachStadiumContainer;;stadiumConversionGroup ;beachStadiumContainer;Default:Online;stadiumConversionGroup ;cityStadiumContainer;;stadiumConversionGroup ;cityStadiumContainer;Default:Online;stadiumConversionGroup ;discoStadiumContainer;;stadiumConversionGroup ;discoStadiumContainer;Default:Online;stadiumConversionGroup INSERT_UPDATE Media;code[unique=true];mediaContainer(qualifier,$catalogVersion);$catalogVersion; mime;realfilename;mediaFormat(qualifier);@media[translator=de.hybris.platform.impex.jalo.media.MediaDataTranslator][forceWrite=true]; ;beachStadium;beachStadiumContainer;;image/jpeg;nature_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/nature_work.jpg; ;cityStadium;cityStadiumContainer;;image/jpeg;city_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/city_work.jpg; ;discoStadium;discoStadiumContainer;;image/jpeg;nightlife_work.jpg;Default-WorkingFormat;jar:de.hybris.platform.cuppytrail.jalo.CuppytrailManager&/cuppytrail/media/nightlife_work.jpg; INSERT_UPDATE MediaConversionCronJob;code[unique=true];$catalogVersion;job(code);includedFormats(qualifier);sessionLanguage(isoCode[default=$lang]) ;cuppytrailMediaConversionCronJob;;mediaConversionJob;stadiumListFormat,stadiumDetailsFormat; INSERT_UPDATE CatalogVersionSyncCronJob; code[unique=true];job(code);sessionLanguage(isoCode[default=$lang]);logToFile[default=false];logToDataBase[default=false];forceUpdate[default=false] ;cuppytrailMediaSyncCronJob;Sync Default\:Staged -> Default\:Online; #% import de.hybris.platform.core.Registry #% import de.hybris.platform.servicelayer.cronjob.CronJobService #% CronJobService cronJobService = Registry.getApplicationContext().getBean("cronJobService") #% cronJobService.performCronJob(cronJobService.getCronJob("cuppytrailMediaConversionCronJob"),true) #% cronJobService.performCronJob(cronJobService.getCronJob("cuppytrailMediaSyncCronJob"),true) INSERT_UPDATE Stadium;code[unique=true];capacity;stadiumImage(qualifier,$catalogVersion) ;beachstadium;20000;beachStadiumContainer::Online ;citystadium;60000;cityStadiumContainer::Online ;discostadium;5000;discoStadiumContainer::Online
Providing the code
Having gone through the DAO, Services, Facades and Frontend trail you will probably have a good understanding of the necessary steps.The rough idea is that the
StadiumsControllertells the
StadiumFacadethe required format which itself will delegate the call to an appropriate service.
The Service
Add a new definition to StadiumService
相关文章推荐
- wholeContainer.setMinimumHeight(wholeContainerHeight + buttonsContainerHeight);
- CF 615B. Longtail Hedgehog 图 dp
- 10010---Trail ~ Testing the Façades
- int main(int argc, char * argv[]) 里的异常处理
- 10009---Trail ~ Testing the Services
- 217. Contains Duplicate
- 理解支持向量机(四)LibSVM工具包的使用
- 10008---Trail ~ Testing the DAO
- 分类模型的性能评估——以SAS Logistic回归为例(3): Lift和Gain
- hdu 2476 String painter 区间dp 难
- tail -f -F是个好东西
- idea修改文件名后出现main method should be static错误
- Design Pattern Explained 读书笔记二——设计模式序言
- 【POJ1765】November Rain——扫描线+线段树
- LeetCode. Container With Most Water
- IBM openblockchain学习(三)--Ledger源码分析
- 【LeetCode】220. Contains Duplicate III
- error: command 'gcc' failed with exit status 1 的解决办法
- RAID5工作原理介绍
- 219. Contains Duplicate II