LVS+Keepalived
2015-12-24 21:59
260 查看
实验环境：
LVS01:192.168.0.149 #（外网）
10.0.0.13 #（内网）
LVS02:192.168.0.150
10.0.0.14
web01:10.0.0.15 #（web环境自行搭建）
web02:10.0.0.16 #（web环境自行搭建）
VIP:192.168.0.145
安装准备：
[root@LVS01 ~]# cat /etc/redhat-release
CentOS release 6.7 (Final)
[root@LVS01 ~]# uname -r
2.6.32-573.el6.x86_64
[root@LVS01 ~]# lsmod|grep ip_vs #查看是否安装LVS，或启用LVS
[root@LVS01 ~]# ls -ld /usr/src/kernels/2.6.32-573.12.1.el6.x86_64
drwxr-xr-x 22 root root 4096 Dec 18 00:12 /usr/src/kernels/2.6.32-573.12.1.el6.x86_64
[root@LVS01 ~]# ln -s /usr/src/kernels/2.6.32-573.12.1.el6.x86_64/ /usr/src/linux
[root@LVS01 ~]# grep forward /etc/sysctl.conf #开启内核转发
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
执行
# sysctl -p
1.安装LVS：
[root@LVS01 ~]# wget http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.26.tar.gz [root@LVS01 ~]# tar xf ipvsadm-1.26.tar.gz
[root@LVS01 ~]# cd ipvsadm-1.26
[root@LVS01 ipvsadm-1.26]# make
[root@LVS01 ipvsadm-1.26]# make install
[root@LVS01 ipvsadm-1.26]# lsmod|grep ip_vs
[root@LVS01 ipvsadm-1.26]# which ipvsadm
/sbin/ipvsadm
[root@LVS01 ipvsadm-1.26]# cd ..
[root@LVS01 ~]# ipvsadm --version
ipvsadm v1.26 2008/5/15 (compiled with popt and IPVS v1.2.1)
[root@LVS01 ~]# lsmod|grep ip_vs
ip_vs 125694 0
libcrc32c 1246 1 ip_vs
ipv6 334932 141 ip_vs
#出现以上三行结果，表示安装成功
2.安装Keepalived：
[root@LVS01 tools]# ln -s /usr/src/kernels/2.6.32-573.12.1.el6.x86_64/ /usr/src/linux
[root@LVS01 tools]# tar xf keepalived-1.2.7.tar.gz
[root@LVS01 tools]# cd keepalived-1.2.7
[root@LVS01 keepalived-1.2.7]# ./configure
............................................
Keepalived version : 1.2.7
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use VRRP VMAC : Yes
SNMP support : No
Use Debug flags : No
#以上最后结果中，最好最少有3个Yes,如下：
Use IPVS Framework : Yes #ipvs框架
IPVS sync daemon support : Yes #ipvs同步支持
Use VRRP Framework : Yes #VRRP框架
[root@LVS01 keepalived-1.2.7]# make
[root@LVS01 keepalived-1.2.7]# make install
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
[root@LVS01 keepalived-1.2.7]# mkdir /etc/keepalived -p
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
[root@LVS01 keepalived-1.2.7]# cp /usr/local/sbin/keepalived /usr/sbin/
[root@LVS01 keepalived-1.2.7]# /etc/init.d/keepalived start
Starting keepalived: [ OK ]
[root@LVS01 keepalived-1.2.7]# ps -ef|grep keepalived
root 14563 1 0 06:57 ? 00:00:00 keepalived -D
root 14565 14563 0 06:57 ? 00:00:00 keepalived -D
root 14566 14563 0 06:57 ? 00:00:00 keepalived -D
root 14570 13038 0 06:57 pts/0 00:00:00 grep keepalived
[root@LVS01 keepalived-1.2.7]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@LVS01 keepalived-1.2.7]# ps -ef|grep keepalived|grep -v grep
3.配置Keepalived：
主(LVS01)：
[root@LVS01 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
1729294227@qq.com
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.0.200
smtp_connect_timeout 30
router_id LVS_1
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.145/24
}
}
virtual_server 192.168.0.145 80 {
delay_loop 6
lb_algo wrr #负载均衡算法
lb_kind DR #负载均衡模式
nat_mask 255.255.255.0 #子网掩码
persistence_timeout 300 #会话保持
protocol TCP #协议
real_server 10.0.0.15 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.0.0.16 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
备(LVS02)：
[root@LVS02 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
1729294227@qq.com
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.0.200
smtp_connect_timeout 30
router_id LVS_2
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.145/24
}
}
virtual_server 192.168.0.145 80 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
persistence_timeout 300
protocol TCP
real_server 10.0.0.15 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.0.0.16 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
4.手工在RS绑定VIP（两台web机器上）：
web01:
[root@web01 ~]# curl -i localhost
HTTP/1.1 200 OK
Server: nginx/1.6.3
Date: Thu, 26 Nov 2015 12:09:12 GMT
Content-Type: text/html
Content-Length: 24
Last-Modified: Thu, 26 Nov 2015 09:19:01 GMT
Connection: keep-aliveETag: "5656ce85-18"
Accept-Ranges: bytes
192.168.0.151:test1-web
[root@web01 ~]# ifconfig lo:0 192.168.0.145/32 up
[root@web01 ~]# ifconfig lo:0
lo:0 Link encap:Local Loopback
inet addr:192.168.0.145 Mask:0.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
web02:
[root@web02 ~]# curl -i localhostHTTP/1.1 200 OK
Server: nginx/1.6.3
Date: Sat, 07 Nov 2015 16:18:31 GMT
Content-Type: text/html
Content-Length: 24
Last-Modified: Sat, 07 Nov 2015 13:27:39 GMT
Connection: keep-alive
ETag: "563dfc4b-18"
Accept-Ranges: bytes
192.168.0.160:test2-web[root@web02 ~]# ifconfig lo:0 192.168.0.145/32 up
[root@web02 ~]# ifconfig lo:0
lo:0 Link encap:Local Loopback
inet addr:192.168.0.145 Mask:0.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
#以上可通过脚本实现
注意，做好以下三点保证IP不冲突：
1.绑定在回环接口上（lo)
2.绑定VIP地址
3.子网掩码是：255.255.255.255
5.手工在RS端(两台web机器上)抑制ARP响应：
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
#以上可通过脚本实现
6.最终测试：
[root@LVS01 ~]# /etc/init.d/keepalived start
[root@LVS01 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.145:80 wrr persistent 300
-> 10.0.0.15:80 Route 1 0 0
-> 10.0.0.16:80 Route 1 0 0
[root@LVS01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.149/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.145/24 scope global secondary eth0
inet6 fe80::20c:29ff:fea4:2669/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:73 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.13/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fea4:2673/64 scope link
valid_lft forever preferred_lft forever
[root@LVS02 ~]# /etc/init.d/keepalived start
[root@LVS02 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.145:80 wrr persistent 300
-> 10.0.0.15:80 Route 1 0 0
-> 10.0.0.16:80 Route 1 0 0
[root@LVS02 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.150/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fe6a:27b4/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:be brd ff:ff:ff:ff:ff:ff
inet 10.0.0.14/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fe6a:27be/64 scope link
valid_lft forever preferred_lft forever
7.模拟“故障”测试高可用：
[root@LVS01 ~]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@LVS01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.149/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fea4:2669/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:73 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.13/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fea4:2673/64 scope link
valid_lft forever preferred_lft forever
[root@LVS02 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.150/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.145/24 scope global secondary eth0
inet6 fe80::20c:29ff:fe6a:27b4/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:be brd ff:ff:ff:ff:ff:ff
inet 10.0.0.14/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fe6a:27be/64 scope link
valid_lft forever preferred_lft forever
嘿嘿，VIP飘移成功，看web界面吧！
本文出自 “兰州linux运维” 博客，请务必保留此出处http://linuxzkq.blog.51cto.com/9379412/1728038
LVS01:192.168.0.149 #（外网）
10.0.0.13 #（内网）
LVS02:192.168.0.150
10.0.0.14
web01:10.0.0.15 #（web环境自行搭建）
web02:10.0.0.16 #（web环境自行搭建）
VIP:192.168.0.145
安装准备：
[root@LVS01 ~]# cat /etc/redhat-release
CentOS release 6.7 (Final)
[root@LVS01 ~]# uname -r
2.6.32-573.el6.x86_64
[root@LVS01 ~]# lsmod|grep ip_vs #查看是否安装LVS，或启用LVS
[root@LVS01 ~]# ls -ld /usr/src/kernels/2.6.32-573.12.1.el6.x86_64
drwxr-xr-x 22 root root 4096 Dec 18 00:12 /usr/src/kernels/2.6.32-573.12.1.el6.x86_64
[root@LVS01 ~]# ln -s /usr/src/kernels/2.6.32-573.12.1.el6.x86_64/ /usr/src/linux
[root@LVS01 ~]# grep forward /etc/sysctl.conf #开启内核转发
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
执行
# sysctl -p
1.安装LVS：
[root@LVS01 ~]# wget http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.26.tar.gz [root@LVS01 ~]# tar xf ipvsadm-1.26.tar.gz
[root@LVS01 ~]# cd ipvsadm-1.26
[root@LVS01 ipvsadm-1.26]# make
[root@LVS01 ipvsadm-1.26]# make install
[root@LVS01 ipvsadm-1.26]# lsmod|grep ip_vs
[root@LVS01 ipvsadm-1.26]# which ipvsadm
/sbin/ipvsadm
[root@LVS01 ipvsadm-1.26]# cd ..
[root@LVS01 ~]# ipvsadm --version
ipvsadm v1.26 2008/5/15 (compiled with popt and IPVS v1.2.1)
[root@LVS01 ~]# lsmod|grep ip_vs
ip_vs 125694 0
libcrc32c 1246 1 ip_vs
ipv6 334932 141 ip_vs
#出现以上三行结果，表示安装成功
2.安装Keepalived：
[root@LVS01 tools]# ln -s /usr/src/kernels/2.6.32-573.12.1.el6.x86_64/ /usr/src/linux
[root@LVS01 tools]# tar xf keepalived-1.2.7.tar.gz
[root@LVS01 tools]# cd keepalived-1.2.7
[root@LVS01 keepalived-1.2.7]# ./configure
............................................
Keepalived version : 1.2.7
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use VRRP VMAC : Yes
SNMP support : No
Use Debug flags : No
#以上最后结果中，最好最少有3个Yes,如下：
Use IPVS Framework : Yes #ipvs框架
IPVS sync daemon support : Yes #ipvs同步支持
Use VRRP Framework : Yes #VRRP框架
[root@LVS01 keepalived-1.2.7]# make
[root@LVS01 keepalived-1.2.7]# make install
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
[root@LVS01 keepalived-1.2.7]# mkdir /etc/keepalived -p
[root@LVS01 keepalived-1.2.7]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
[root@LVS01 keepalived-1.2.7]# cp /usr/local/sbin/keepalived /usr/sbin/
[root@LVS01 keepalived-1.2.7]# /etc/init.d/keepalived start
Starting keepalived: [ OK ]
[root@LVS01 keepalived-1.2.7]# ps -ef|grep keepalived
root 14563 1 0 06:57 ? 00:00:00 keepalived -D
root 14565 14563 0 06:57 ? 00:00:00 keepalived -D
root 14566 14563 0 06:57 ? 00:00:00 keepalived -D
root 14570 13038 0 06:57 pts/0 00:00:00 grep keepalived
[root@LVS01 keepalived-1.2.7]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@LVS01 keepalived-1.2.7]# ps -ef|grep keepalived|grep -v grep
3.配置Keepalived：
主(LVS01)：
[root@LVS01 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
1729294227@qq.com
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.0.200
smtp_connect_timeout 30
router_id LVS_1
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.145/24
}
}
virtual_server 192.168.0.145 80 {
delay_loop 6
lb_algo wrr #负载均衡算法
lb_kind DR #负载均衡模式
nat_mask 255.255.255.0 #子网掩码
persistence_timeout 300 #会话保持
protocol TCP #协议
real_server 10.0.0.15 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.0.0.16 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
备(LVS02)：
[root@LVS02 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
1729294227@qq.com
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.0.200
smtp_connect_timeout 30
router_id LVS_2
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.145/24
}
}
virtual_server 192.168.0.145 80 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
persistence_timeout 300
protocol TCP
real_server 10.0.0.15 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.0.0.16 80 {
weight 1
TCP_CHECK {
connect_timeout 8
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
4.手工在RS绑定VIP（两台web机器上）：
web01:
[root@web01 ~]# curl -i localhost
HTTP/1.1 200 OK
Server: nginx/1.6.3
Date: Thu, 26 Nov 2015 12:09:12 GMT
Content-Type: text/html
Content-Length: 24
Last-Modified: Thu, 26 Nov 2015 09:19:01 GMT
Connection: keep-aliveETag: "5656ce85-18"
Accept-Ranges: bytes
192.168.0.151:test1-web
[root@web01 ~]# ifconfig lo:0 192.168.0.145/32 up
[root@web01 ~]# ifconfig lo:0
lo:0 Link encap:Local Loopback
inet addr:192.168.0.145 Mask:0.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
web02:
[root@web02 ~]# curl -i localhostHTTP/1.1 200 OK
Server: nginx/1.6.3
Date: Sat, 07 Nov 2015 16:18:31 GMT
Content-Type: text/html
Content-Length: 24
Last-Modified: Sat, 07 Nov 2015 13:27:39 GMT
Connection: keep-alive
ETag: "563dfc4b-18"
Accept-Ranges: bytes
192.168.0.160:test2-web[root@web02 ~]# ifconfig lo:0 192.168.0.145/32 up
[root@web02 ~]# ifconfig lo:0
lo:0 Link encap:Local Loopback
inet addr:192.168.0.145 Mask:0.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
#以上可通过脚本实现
注意，做好以下三点保证IP不冲突：
1.绑定在回环接口上（lo)
2.绑定VIP地址
3.子网掩码是：255.255.255.255
5.手工在RS端(两台web机器上)抑制ARP响应：
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
#以上可通过脚本实现
6.最终测试：
[root@LVS01 ~]# /etc/init.d/keepalived start
[root@LVS01 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.145:80 wrr persistent 300
-> 10.0.0.15:80 Route 1 0 0
-> 10.0.0.16:80 Route 1 0 0
[root@LVS01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.149/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.145/24 scope global secondary eth0
inet6 fe80::20c:29ff:fea4:2669/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:73 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.13/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fea4:2673/64 scope link
valid_lft forever preferred_lft forever
[root@LVS02 ~]# /etc/init.d/keepalived start
[root@LVS02 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.145:80 wrr persistent 300
-> 10.0.0.15:80 Route 1 0 0
-> 10.0.0.16:80 Route 1 0 0
[root@LVS02 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.150/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fe6a:27b4/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:be brd ff:ff:ff:ff:ff:ff
inet 10.0.0.14/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fe6a:27be/64 scope link
valid_lft forever preferred_lft forever
7.模拟“故障”测试高可用：
[root@LVS01 ~]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@LVS01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.149/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fea4:2669/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a4:26:73 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.13/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fea4:2673/64 scope link
valid_lft forever preferred_lft forever
[root@LVS02 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.150/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.145/24 scope global secondary eth0
inet6 fe80::20c:29ff:fe6a:27b4/64 scope link
valid_lft forever preferred_lft forever
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:6a:27:be brd ff:ff:ff:ff:ff:ff
inet 10.0.0.14/24 brd 10.0.0.255 scope global eth3
inet6 fe80::20c:29ff:fe6a:27be/64 scope link
valid_lft forever preferred_lft forever
嘿嘿，VIP飘移成功，看web界面吧！
本文出自 “兰州linux运维” 博客，请务必保留此出处http://linuxzkq.blog.51cto.com/9379412/1728038
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- HDU 1016 Prime Ring Problem 题解
- 关于hbase的一些调优问题
- Linux IO模式及 select、poll、epoll详解
- a＊算法
- Express开发实例(1) —— Hello,world!
- Mysql数据库的优化，慢查询
- Mifare522 Module使用说明书
- apache常用模块介绍
- dialog工具，让脚本迈向图形化
- 《TCP/IP具体解释卷2：实现》笔记--域和协议
- C++为什么类的成员函数中（复制构造函数，赋值操作符等）可以有貌似类的对象访问类的私有成员的用法？
- 黑马程序员--C语言自学笔记---15C语言版通讯录
- C#开源框架(整理)
- 系统管理-02 目录和文件管理
- 使用AndroidAnnotations框架优雅地实现ListView功能例子
- AVL
- 省选模拟考试1
- HTML&&css练习
- NXZFW项目总结（二）
- P09 (**) 把连续重复的列表元素打包为子列表