iOS App瘦身注意armv7 armv7s arm64
2015-11-11 10:35
351 查看
目前ios的指令集有以下几种:
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
================================================
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existing
app, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的 ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
之前每个版本的ipa包打出来都才20M出头,后来不知道从哪个版本起打的包每次都将近40M,但是工程中也没有明显的增加很大第三方类或者图
片、静态文件。于是就开始了各种瘦身计划:压缩图片,删除不必要静态库。做了一番改动后发现包只比原来小了1M多,收效甚微。后来听同事说了
armv6 armv7 armv7s arm64引起编译包翻倍增大的问题,于是就试了一下,果然ipa包又回到了以前的大小。下边来说一下关于ios这个指令集(一下内容
引子DevDiv社区jas,内容稍有修改)。
目前ios的指令集有以下几种:
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
在xcodeTARGETS里边Architectures:
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existing
app, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的
ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
================================================
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Convert Your App to a 64-Bit Binary After Updating It for iOS 7
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existingapp, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
NSIntegerand
CGFloattypes
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的 ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
之前每个版本的ipa包打出来都才20M出头,后来不知道从哪个版本起打的包每次都将近40M,但是工程中也没有明显的增加很大第三方类或者图
片、静态文件。于是就开始了各种瘦身计划:压缩图片,删除不必要静态库。做了一番改动后发现包只比原来小了1M多,收效甚微。后来听同事说了
armv6 armv7 armv7s arm64引起编译包翻倍增大的问题,于是就试了一下,果然ipa包又回到了以前的大小。下边来说一下关于ios这个指令集(一下内容
引子DevDiv社区jas,内容稍有修改)。
目前ios的指令集有以下几种:
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
在xcodeTARGETS里边Architectures:
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Convert Your App to a 64-Bit Binary After Updating It for iOS 7
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existingapp, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
NSIntegerand
CGFloattypes
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的
ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
相关文章推荐
- android的事件传递
- 四、ObjectARX 修改对象的属性
- Android 自定义AlertDialog 去黑边终极解决方案(亲测有效!)
- Android Edittext输入后切换界面出现白块
- android Handler/Looper 总结
- IOS绘图
- 如何检查 Android 应用的内存使用情况
- Android中的两种上下文
- android 捕获全局异常
- 重写ToString()以实现定制化输出字符串
- android NetWorkInfo
- 微信支付二维码显示(二)
- IOS单元测试(1)
- FFmpeg在iOS上完美编译
- (NO.00003)iOS游戏简单的机器人投射游戏成形记(十七)
- LeetCode----Happy Number
- Android-SurfaceView与SurfaceHolder对象
- (NO.00003)iOS游戏简单的机器人投射游戏成形记(十七)
- (NO.00003)iOS游戏简单的机器人投射游戏成形记(十七)
- Android Studio--FrameWorks detected解决方法