arista 交换机镜像端口配置(将某一端口的数据转发到指定端口)
2014-09-15 22:59
465 查看
译文:
大致意思是将某些端口的数据发送到指定的端口。
原文如下
12.5.2.2
Mirror Port Configuration
Port mirroring is the duplication of traffic from a set of source ports onto a destination port. A mirror
session associates a set of source ports to a destination port.
• The monitor session source command configures an Ethernet or port channel interface as the
source port of a specified port mirroring session.
• The monitor session destination command configures an Ethernet interface as the destination port
of a specified port mirroring session.
Example
• These commands configure Ethernet interface 8 as the source port and Ethernet interface 7 as
the destination port for the redirect_1 mirroring session. The session mirrors the source port’s
ingress and egress traffic.
switch(config)#monitor session redirect_1 source ethernet 7
switch(config)#monitor session redirect_1 destination ethernet 8
•
This command displays the configuration of the redirect_1 mirroring session.
switch(config)#show monitor session
Session redirect_1
------------------------
Source Ports
Both:
Et7
Destination Port: Et8
switch(config)#
大致意思是将某些端口的数据发送到指定的端口。
原文如下
12.5.2.2
Mirror Port Configuration
Port mirroring is the duplication of traffic from a set of source ports onto a destination port. A mirror
session associates a set of source ports to a destination port.
• The monitor session source command configures an Ethernet or port channel interface as the
source port of a specified port mirroring session.
• The monitor session destination command configures an Ethernet interface as the destination port
of a specified port mirroring session.
Example
• These commands configure Ethernet interface 8 as the source port and Ethernet interface 7 as
the destination port for the redirect_1 mirroring session. The session mirrors the source port’s
ingress and egress traffic.
switch(config)#monitor session redirect_1 source ethernet 7
switch(config)#monitor session redirect_1 destination ethernet 8
•
This command displays the configuration of the redirect_1 mirroring session.
switch(config)#show monitor session
Session redirect_1
------------------------
Source Ports
Both:
Et7
Destination Port: Et8
switch(config)#
相关文章推荐
- 常用品牌交换机端口镜像(Port Mirroring)配置
- 关于华为各种型号交换机端口镜像配置方法总结
- H3C S5000P 交换机 端口镜像功能的配置
- 常用品牌交换机端口镜像(Port Mirroring)配置
- 常用品牌交换机端口镜像(Port Mirroring)配置
- 华为各种型号交换机端口镜像配置方法总结
- 华为交换机交换机端口镜像配置
- 交换机端口镜像(Port Mirroring)配置
- 各型号交换机端口镜像配置方法和命令
- 多种交换机端口镜像 Port Mirroring 配置
- Cisco 交换机配置端口镜像
- Cisco 交换机配置端口镜像
- 华为多款交换机端口镜像配置
- H3C各种型号交换机端口镜像配置方法总结
- 华为交换机交换机端口镜像配置
- 华为交换机交换机端口镜像配置
- 华为各种型号交换机端口镜像配置方法总结
- 化为交换机端口镜像配置
- 交换机的数据转发和简单配置
- 为了交换机端口镜像配置 使出专家浑身解数