dpdk配置 万兆网卡 驱动 失败的 原因分析及 解决办法

dpdk的版本是1.7.1的稳定版，服务器是ubuntu12.04LTS x86 64bit

绑定万兆网卡的默认驱动ixgbe失败

# ./dpdk_nic_bind.py -b ixgbe 06:00.1

Error: bind failed for 0000:06:00.1 - Cannot bind to driver ixgbe

查看原因 dmesg |tail

# dmesg |tail

[ 5667.433649] ixgbe 0000:06:00.1: failed to load because an unsupported SFP+ module type was detected.

[ 5667.433953] ixgbe 0000:06:00.1: Reload the driver after installing a supported module.

[ 5667.434282] ixgbe 0000:06:00.1: PCI INT B disabled

发现原因是光模块不支持

解决办法是换两块intel的光模块

参考文章：万兆网卡启动失败问题 http://www.linux80.com/a/Linuxxitong/2014/0527/43.html