PHP生成器Generators
2014-05-15 13:37
260 查看
下文的第一个逐行读取文件例子用三种方式实现;普通方法,迭代器和生成器,比较了他们的优缺点,很好,可以引用到自己的代码中 ,支持的php版本(PHP 5 >= 5.5.0)
后面的yield讲解,得逐行翻译理解
Author: Nikita Popov nikic@php.net
Status: Implemented
As an example, consider how you would implement the
The main disadvantage of this kind of code is evident: It will read the whole file into a large array. Depending on how big the file is, this can easily hit the memory limit. This is not what you usually want. Instead you want to get the lines one by one. This is what iterators are perfect for.
Sadly implementing iterators requires an insane amount of boilerplate code. E.g. consider this iterator variant of the above function:
As you can see a very simple piece of code can easily become very complicated when turned into an iterator. Generators solve this problem and allow you to implement iterators in a very straightforward manner:
The code looks very similar to the array-based implementation. The main difference is that instead of pushing values into an array the values are
Generators work by passing control back and forth between the generator and the calling code:
When you first call the generator function (
Whenever the
Generator methods, together with the
Generators can also be used the other way around, i.e. instead of producing values they can also consume them. When used in this way they are often referred to as enhanced generators, reverse generators or coroutines.
Coroutines are a rather advanced concept, so it very hard to come up with not too contrived an short examples. For an introduction see an example on how to parse streaming XML using coroutines. If you want to know more, I highly recommend checking out a presentation on this subject.
The initial implementation required that generator functions are marked with an asterix modifier (
The automatic detection was chosen over the asterix modifier for the following reasons:
There is an existing generator implementation in HipHop PHP, which uses automatic-detection. Using the asterix modifier would break compatibility.
All existing generator implementations in other language (that I know of) also use automatic detection. This includes Python, JavaScript 1.7 and C#. The only exception to this is the generator support as defined by ECMAScript Harmony, but I know no browser that actually implements it in the defined way.
The syntax for by-reference yielding looks very ugly:
yield-less coroutines are a very narrow use case and are also possible with automatic-detection using a code like
The
If the generator is not yet at a
Consider this example:
A nice side-effect of this behavior is that coroutines do not have to be primed with a
Apart from the above the
The return value of the
To avoid ambiguities the first two
If
The only exception is the
Python also has parentheses requirements for expression-use of
See also the "Alternative yield syntax considerations" section.
In PHP on the other hand keys are explicitly part of the iteration process and it thus does not make sense to not add key-yielding support. The syntax could be analogous to that of
Furthermore generators need to generate keys even if no key was explicitly yielded. In this case it seems reasonable to behave the same as arrays do: Start with the key
This is the same behavior that arrays have (i.e. if
This for example allows you to create classes with by-ref iteration behavior (which is something that is completely impossible with normal iterators):
The class can then be iterated using by-ref
Only generators specifying the
Values are always sent by-value. The reference modifier
A simple example of sending values: Two (interchangeable) logging implementations:
An example of the functionality:
Here rewinding would simply result in an empty iterator as the result set is already depleted.
For the above reasons generators will not support rewinding. The
So basically calling
Support for cloning was included in the initial version, but removed in PHP 5.5 Beta 3 due to implementational difficulties, unclear semantics and no particularly convincing use cases.
A generator can be closed in two ways:
Reaching a
Removing all references to the generator object. In this case the generator will be closed as part of the garbage collection process.
If the generator contains (relevant)
The following resources are destructed while closing a generator:
The current execution context (
Stack arguments for the generator call, and the additional execution context which is used to manage them.
The currently active symbol table (or the compiled variables if no symbol table is in use).
The current
If the generator is closed during a method call, the object which the method is invoked on (
If the generator is closed during a call, the arguments pushed to the stack.
Any
The current generator key and value
Currently it can happen that temporary variables are not cleaned up properly in edge-case situations. Exceptions are also subject to this problem: https://bugs.php.net/bug.php?id=62210. If that bug could be fixed for exceptions, then it would also be fixed for generators.
Using
Using
Manual construction of
Yielding a key that isn't an integer or a key:
Trying to iterate a non-ref generator by-ref:
Trying to traverse an already closed generator:
Trying to rewind a generator after the first yield:
Yielding a temp/const value by-ref:
Yielding a string offset by-ref:
Yielding a by-val function return value by-ref:
This list might not be exhaustive.
Using generators (
Using iterators (
Using arrays implemented in userland (
Using arrays implemented internally (
For large ranges generators are consistently faster; about four times faster than an iterator implementation and even 40% faster than the native
For small ranges (around one hundred elements) the variance of the results is rather high, but from multiple runs it seems that in this case generators are slightly slower than the native implementation, but still faster than the iterator variant.
The tests were run on a Ubuntu VM, so I'm not exactly sure how representative they are.
This approach has two main disadvantages:
Firstly, callbacks integrate badly into the existing PHP coding paradigms. Having quadruply-nested closures is something very normal in languages like JavaScript, but rather rare in PHP. Many things in PHP are based on iteration and generators can nicely integrate with this.
A concrete example, which was actually my initial motivation to write the generators patch:
This is a function which I use to provide test vectors to PHPUnit. I point it to a directory containing test files and then split up those test files into individual tests + expected output. I can then use the result of the function to feed some test function via
The problem with the above implementation obviously is that I have to read all tests into memory at once (instead of one-by-one).
How can I solve this problem? By turning it into an iterator obviously! But if you look closer, this isn't actually that easy, because I'm adding new tests in a nested loop. So I would have to implement some kind of complex push-back mechanism to solve the problem. And - getting back on topic - I can't use callbacks here either, because I need a traversable for use with
The second, more general problem with callbacks is that it's very hard to manage state across calls. The classic example is a lexer + parser system. If you implement the lexer using a callback (i.e.
The main advantage of this syntax is that it would avoid the strange parentheses requirements for the
One of the main issues with the pseudo-function syntax is that it makes the semantics of
Generally PHP uses the
As
So the function-like
I also created a PR so that the diff can be viewed more easily: https://github.com/php/php-src/pull/177
(来源:https://wiki.php.net/rfc/generators#closing_a_generator)
后面的yield讲解,得逐行翻译理解
Request for Comments: Generators
Date: 2012-06-05Author: Nikita Popov nikic@php.net
Status: Implemented
Introduction
Generators provide an easy, boilerplate-free way of implementing iterators.As an example, consider how you would implement the
file()function in userland code:
function getLinesFromFile($fileName) { if (!$fileHandle = fopen($fileName, 'r')) { return; } $lines = []; while (false !== $line = fgets($fileHandle)) { $lines[] = $line; } fclose($fileHandle); return $lines; } $lines = getLinesFromFile($fileName); foreach ($lines as $line) { // do something with $line }
The main disadvantage of this kind of code is evident: It will read the whole file into a large array. Depending on how big the file is, this can easily hit the memory limit. This is not what you usually want. Instead you want to get the lines one by one. This is what iterators are perfect for.
Sadly implementing iterators requires an insane amount of boilerplate code. E.g. consider this iterator variant of the above function:
class LineIterator implements Iterator { protected $fileHandle; protected $line; protected $i; public function __construct($fileName) { if (!$this->fileHandle = fopen($fileName, 'r')) { throw new RuntimeException('Couldn\'t open file "' . $fileName . '"'); } } public function rewind() { fseek($this->fileHandle, 0); $this->line = fgets($this->fileHandle); $this->i = 0; } public function valid() { return false !== $this->line; } public function current() { return $this->line; } public function key() { return $this->i; } public function next() { if (false !== $this->line) { $this->line = fgets($this->fileHandle); $this->i++; } } public function __destruct() { fclose($this->fileHandle); } } $lines = new LineIterator($fileName); foreach ($lines as $line) { // do something with $line }
As you can see a very simple piece of code can easily become very complicated when turned into an iterator. Generators solve this problem and allow you to implement iterators in a very straightforward manner:
function getLinesFromFile($fileName) { if (!$fileHandle = fopen($fileName, 'r')) { return; } while (false !== $line = fgets($fileHandle)) { yield $line; } fclose($fileHandle); } $lines = getLinesFromFile($fileName); foreach ($lines as $line) { // do something with $line }
The code looks very similar to the array-based implementation. The main difference is that instead of pushing values into an array the values are
yielded.
Generators work by passing control back and forth between the generator and the calling code:
When you first call the generator function (
$lines = getLinesFromFile($fileName)) the passed argument is bound, but nothing of the code is actually executed. Instead the function directly returns a
Generatorobject. That
Generatorobject implements the
Iteratorinterface and is what is eventually traversed by the
foreachloop:
Whenever the
Iterator::next()method is called PHP resumes the execution of the generator function until it hits a
yieldexpression. The value of that
yieldexpression is what
Iterator::current()then returns.
Generator methods, together with the
IteratorAggregateinterface, can be used to easily implement traversable classes too:
class Test implements IteratorAggregate { protected $data; public function __construct(array $data) { $this->data = $data; } public function getIterator() { foreach ($this->data as $key => $value) { yield $key => $value; } // or whatever other traversation logic the class has } } $test = new Test(['foo' => 'bar', 'bar' => 'foo']); foreach ($test as $k => $v) { echo $k, ' => ', $v, "\n"; }
Generators can also be used the other way around, i.e. instead of producing values they can also consume them. When used in this way they are often referred to as enhanced generators, reverse generators or coroutines.
Coroutines are a rather advanced concept, so it very hard to come up with not too contrived an short examples. For an introduction see an example on how to parse streaming XML using coroutines. If you want to know more, I highly recommend checking out a presentation on this subject.
Specification
Recognition of generator functions
Any function which contains ayieldstatement is automatically a generator function.
The initial implementation required that generator functions are marked with an asterix modifier (
function*). This method has the advantage that generators are more explicit and also allows for yield-less coroutines.
The automatic detection was chosen over the asterix modifier for the following reasons:
There is an existing generator implementation in HipHop PHP, which uses automatic-detection. Using the asterix modifier would break compatibility.
All existing generator implementations in other language (that I know of) also use automatic detection. This includes Python, JavaScript 1.7 and C#. The only exception to this is the generator support as defined by ECMAScript Harmony, but I know no browser that actually implements it in the defined way.
The syntax for by-reference yielding looks very ugly:
function *&gen()
yield-less coroutines are a very narrow use case and are also possible with automatic-detection using a code like
if (false) yield;.
Basic behavior
When a generator function is called the execution is suspended immediately after parameter binding and aGeneratorobject is returned.
The
Generatorobject implements the following interface:
final class Generator implements Iterator { void rewind(); bool valid(); mixed current(); mixed key(); void next(); mixed send(mixed $value); mixed throw(Exception $exception); }
If the generator is not yet at a
yieldstatement (i.e. was just created and not yet used as an iterator), then any call to
rewind,
valid,
current,
key,
nextor
sendwill resume the generator until the next
yieldstatement is hit.
Consider this example:
function gen() { echo 'start'; yield 'middle'; echo 'end'; } // Initial call does not output anything $gen = gen(); // Call to current() resumes the generator, thus "start" is echo'd. // Then the yield expression is hit and the string "middle" is returned // as the result of current() and then echo'd. echo $gen->current(); // Execution of the generator is resumed again, thus echoing "end" $gen->next();
A nice side-effect of this behavior is that coroutines do not have to be primed with a
next()call before they can be used. (This is required in Python and also the reason why coroutines in Python usually use some kind of decorator that automatically primes the coroutine.)
Apart from the above the
Generatormethods behave as follows:
rewind: Throws an exception if the generator is currently after the first yield. (More in the “Rewinding a generator” section.)
valid: Returns
falseif the generator has been closed,
trueotherwise. (More in the “Closing a generator” section.)
current: Returns whatever was passed to
yieldor
nullif nothing was passed or the generator is already closed.
key: Returns the yielded key or, if none was specified, an auto-incrementing key or
nullif the generator is already closed. (More in the “Yielding keys” section.)
next: Resumes the generator (unless the generator is already closed).
send: Sets the return value of the
yieldexpression and resumes the generator (unless the generator is already closed). (More in the “Sending values” section.)
throw: Throws an exception at the current suspension point in the generator. (More in the “Throwing into the generator” section.)
Yield syntax
The newly introducedyieldkeyword (
T_YIELD) is used both for sending and receiving values inside the generator. There are three basic forms of the
yieldexpression:
yield $key => $value: Yields the value
$valuewith key
$key.
yield $value: Yields the value
$valuewith an auto-incrementing integer key.
yield: Yields the value
nullwith an auto-incrementing integer key.
The return value of the
yieldexpression is whatever was sent to the generator using
send(). If nothing was sent (e.g. during
foreachiteration)
nullis returned.
To avoid ambiguities the first two
yieldexpression types have to be surrounded by parenthesis when used in expression-context. Some examples when parentheses are necessary and when they aren't:
// these three are statements, so they don't need parenthesis yield $key => $value; yield $value; yield; // these are expressions, so they require parenthesis $data = (yield $key => $value); $data = (yield $value); // to avoid strange (yield) syntax the parenthesis are not required here $data = yield;
If
yieldis used inside a language construct that already has native parentheses, then they don't have to be duplicated:
call(yield $value); // instead of call((yield $value)); if (yield $value) { ... } // instead of if ((yield $value)) { ... }
The only exception is the
array()structure. Not requiring parenthesis would be ambiguous here:
array(yield $key => $value) // can be either array((yield $key) => $value) // or array((yield $key => $value))
Python also has parentheses requirements for expression-use of
yield. The only difference is that Python also requires parentheses for a value-less
yield(because the language does not use semicolons).
See also the "Alternative yield syntax considerations" section.
Yielding keys
The languages that currently implement generators don't have support for yielding keys (only values). This though is just a side-effect as these languages don't support keys in iterators in general.In PHP on the other hand keys are explicitly part of the iteration process and it thus does not make sense to not add key-yielding support. The syntax could be analogous to that of
foreachloops and
arraydeclarations:
yield $key => $value;
Furthermore generators need to generate keys even if no key was explicitly yielded. In this case it seems reasonable to behave the same as arrays do: Start with the key
0and always increment by one. If in between an integer key which is larger than the current auto-key is explicitly yielded, then that will be used as the starting point for new auto-keys. All other yielded keys do not affect the auto-key mechanism.
function gen() { yield 'a'; yield 'b'; yield 'key' => 'c'; yield 'd'; yield 10 => 'e'; yield 'f'; } foreach (gen() as $key => $value) { echo $key, ' => ', $value, "\n"; } // outputs: 0 => a 1 => b key => c 2 => d 10 => e 11 => f
This is the same behavior that arrays have (i.e. if
gen()instead simply returned an array with the yielded values the keys would be same). The only difference occurs when the generator yield non-integer, but numeric keys. For arrays they are cast, for generators the are not.
Yield by reference
Generators can also yield by values by reference. To do so the&modifier is added before the function name, just like it is done for return by reference.
This for example allows you to create classes with by-ref iteration behavior (which is something that is completely impossible with normal iterators):
class DataContainer implements IteratorAggregate { protected $data; public function __construct(array $data) { $this->data = $data; } public function &getIterator() { foreach ($this->data as $key => &$value) { yield $key => $value; } } }
The class can then be iterated using by-ref
foreach:
$dataContainer = new DataContainer([1, 2, 3]); foreach ($dataContainer as &$value) { $value *= -1; } // $this->data is now [-1, -2, -3]
Only generators specifying the
&modifier can be iterated by ref. If you try to iterate a non-ref generator by-ref an
E_ERRORis thrown.
Sending values
Values can be sent into a generator using thesend()method.
send($value)will set
$valueas the return value of the current
yieldexpression and resume the generator. When the generator hits another
yieldexpression the yielded value will be the return value of
send(). This is just a convenience feature to save an additional call to
current().
Values are always sent by-value. The reference modifier
&only affects yielded values, not the ones sent back to the coroutine.
A simple example of sending values: Two (interchangeable) logging implementations:
function echoLogger() { while (true) { echo 'Log: ' . yield . "\n"; } } function fileLogger($fileName) { $fileHandle = fopen($fileName, 'a'); while (true) { fwrite($fileHandle, yield . "\n"); } } $logger = echoLogger(); // or $logger = fileLogger(__DIR__ . '/log'); $logger->send('Foo'); $logger->send('Bar');
Throwing into the generator
Exceptions can be thrown into the generator using theGenerator::throw()method. This will throw an exception in the generator's execution context and then resume the generator. It is roughly equivalent to replacing the current
yieldexpression with a
throwstatement and resuming then. If the generator is already closed the exception will be thrown in the callers context instead (which is equivalent to replacing the
throw()call with a
throwstatement). The
throw()method will return the next yielded value (if the exception is caught and no other exception is thrown).
An example of the functionality:
function gen() { echo "Foo\n"; try { yield; } catch (Exception $e) { echo "Exception: {$e->getMessage()}\n"; } echo "Bar\n"; } $gen = gen(); $gen->rewind(); // echos "Foo" $gen->throw(new Exception('Test')); // echos "Exception: Test" // and "Bar"
Rewinding a generator
Rewinding to some degree goes against the concept of generators, as they are mainly intended as one-time data sources that are not supposed to be iterated another time. On the other hand, most generators probably *are* rewindable and it might make sense to allow it. One could argue though that rewinding a generator is really bad practice (especially if the generator is doing some expensive calculation). Allowing it to rewind would look like it is a cheap operation, just like with arrays. Also rewinding (as in jumping back to the execution context state at the initial call to the generator) can lead to unexpected behavior, e.g. in the following case:function getSomeStuff(PDOStatement $stmt) { foreach ($stmt as $row) { yield doSomethingWith($row); } }
Here rewinding would simply result in an empty iterator as the result set is already depleted.
For the above reasons generators will not support rewinding. The
rewindmethod will throw an exception, unless the generator is currently before or at the first yield. This results in the following behavior:
$gen = createSomeGenerator(); // the rewind() call foreach is doing here is okay, because // the generator is before the first yield foreach ($gen as $val) { ... } // the rewind() call of a second foreach loop on the other hand // throws an exception foreach ($gen as $val) { ... }
So basically calling
rewindis only allowed if it wouldn't do anything (because the generator is already at its initial state). After that an exception is thrown, so accidentally reused generators are easy to find.
Cloning a generator
Generators cannot be cloned.Support for cloning was included in the initial version, but removed in PHP 5.5 Beta 3 due to implementational difficulties, unclear semantics and no particularly convincing use cases.
Closing a generator
When a generator is closed it frees the suspended execution context (as well as all other held variables). After it has been closedvalidwill return
falseand both
currentand
keywill return
null.
A generator can be closed in two ways:
Reaching a
returnstatement (or the end of the function) in a generator or throwing an exception from it (without catching it inside the generator).
Removing all references to the generator object. In this case the generator will be closed as part of the garbage collection process.
If the generator contains (relevant)
finallyblocks those will be run. If the generator is force-closed (i.e. by removing all references) then it is not allowed to use
yieldin the
finallyclause (a fatal error will be thrown). In all other cases
yieldis allowed in
finallyblocks.
The following resources are destructed while closing a generator:
The current execution context (
execute_data)
Stack arguments for the generator call, and the additional execution context which is used to manage them.
The currently active symbol table (or the compiled variables if no symbol table is in use).
The current
$thisobject.
If the generator is closed during a method call, the object which the method is invoked on (
EX(object)).
If the generator is closed during a call, the arguments pushed to the stack.
Any
foreachloop variables which are still alive (taken from
brk_cont_array).
The current generator key and value
Currently it can happen that temporary variables are not cleaned up properly in edge-case situations. Exceptions are also subject to this problem: https://bugs.php.net/bug.php?id=62210. If that bug could be fixed for exceptions, then it would also be fixed for generators.
Error conditions
This is a list of generators-related error conditions:Using
yieldoutside a function:
E_COMPILE_ERROR
Using
returnwith a value inside a generator:
E_COMPILE_ERROR
Manual construction of
Generatorclass:
E_RECOVERABLE_ERROR(analogous to
Closurebehavior)
Yielding a key that isn't an integer or a key:
E_ERROR(this is just a placeholder until Etienne's arbitrary-keys patch lands)
Trying to iterate a non-ref generator by-ref:
Exception
Trying to traverse an already closed generator:
Exception
Trying to rewind a generator after the first yield:
Exception
Yielding a temp/const value by-ref:
E_NOTICE(analogous to
returnbehavior)
Yielding a string offset by-ref:
E_ERROR(analogous to
returnbehavior)
Yielding a by-val function return value by-ref:
E_NOTICE(analogous to
returnbehavior)
This list might not be exhaustive.
Performance
You can find a small micro benchmark at https://gist.github.com/2975796. It compares several ways of iterating ranges:Using generators (
xrange)
Using iterators (
RangeIterator)
Using arrays implemented in userland (
urange)
Using arrays implemented internally (
range)
For large ranges generators are consistently faster; about four times faster than an iterator implementation and even 40% faster than the native
rangeimplementation.
For small ranges (around one hundred elements) the variance of the results is rather high, but from multiple runs it seems that in this case generators are slightly slower than the native implementation, but still faster than the iterator variant.
The tests were run on a Ubuntu VM, so I'm not exactly sure how representative they are.
Some points from the discussion
Why not just use callback functions?
A question that has come up a few times during discussion: Why not use callback functions, instead of generators? For example the abovegetLinesFromFilefunction could be rewritten using a callback:
function processLinesFromFile($fileName, callable $callback) { if (!$fileHandle = fopen($fileName, 'r')) { return; } while (false !== $line = fgets($fileHandle)) { $callback($line); } fclose($fileHandle); } processLinesFromFile($fileName, function($line) { // do something });
This approach has two main disadvantages:
Firstly, callbacks integrate badly into the existing PHP coding paradigms. Having quadruply-nested closures is something very normal in languages like JavaScript, but rather rare in PHP. Many things in PHP are based on iteration and generators can nicely integrate with this.
A concrete example, which was actually my initial motivation to write the generators patch:
protected function getTests($directory, $fileExtension) { $it = new RecursiveDirectoryIterator($directory); $it = new RecursiveIteratorIterator($it, RecursiveIteratorIterator::LEAVES_ONLY); $it = new RegexIterator($it, '(\.' . preg_quote($fileExtension) . '$)'); $tests = array(); foreach ($it as $file) { // read file $fileContents = file_get_contents($file); // parse sections $parts = array_map('trim', explode('-----', $fileContents)); // first part is the name $name = array_shift($parts); // multiple sections possible with always two forming a pair foreach (array_chunk($parts, 2) as $chunk) { $tests[] = array($name, $chunk[0], $chunk[1]); } } return $tests; }
This is a function which I use to provide test vectors to PHPUnit. I point it to a directory containing test files and then split up those test files into individual tests + expected output. I can then use the result of the function to feed some test function via
@dataProvider.
The problem with the above implementation obviously is that I have to read all tests into memory at once (instead of one-by-one).
How can I solve this problem? By turning it into an iterator obviously! But if you look closer, this isn't actually that easy, because I'm adding new tests in a nested loop. So I would have to implement some kind of complex push-back mechanism to solve the problem. And - getting back on topic - I can't use callbacks here either, because I need a traversable for use with
@dataProvider. Generators on the other hand solve this problem very elegantly. Actually, all you have to do to turn it into a lazy generator is replace
$tests[] =with
yield.
The second, more general problem with callbacks is that it's very hard to manage state across calls. The classic example is a lexer + parser system. If you implement the lexer using a callback (i.e.
lex(string $sourceCode, callable $tokenConsumer)) you would have to figure out some way to keep state between subsequent calls. You'd have to build some kind of state machine, which can quickly get really ugly, even for simple problems (just look at the hundreds of states that a typical LALR parser has). Again, generators solve this problem elegantly, because they maintain state implicitly, in the execution state.
Alternative yield syntax considerations
Andrew proposed to use a function-like syntax foryieldinstead of the keyword notation. The three
yieldvariants would then look as follows:
yield()
yield($value)
yield($key => $value)
The main advantage of this syntax is that it would avoid the strange parentheses requirements for the
yield $valuesyntax.
One of the main issues with the pseudo-function syntax is that it makes the semantics of
yieldless clear. Currently the
yieldsyntax looks very similar to the
returnsyntax. Both are very similar in a function, so it is desirable to keep them similar in syntax too.
Generally PHP uses the
keyword $exprsyntax instead of the
keyword($expr)syntax in all places where the statement-use is more common than the expression-use. E.g.
include $file;is usually used as a statement and only very rarely as an expression.
isset($var)on the other hand is normally used as an expression (a statement use wouldn't make any sense, actually).
As
yieldwill be used as a statement in the vast majority of cases the
yield $exprsyntax thus seems more appropriate. Furthermore the most common expression-use of
yieldis value-less, in which case the parentheses requirements don't apply (i.e. you can write just
$data = yield;).
So the function-like
yield($value)syntax would optimize a very rare use case (namely
$recv = yield($send);), at the same time making the common use cases less clear.
Patch
The current implementation can be found in this branch: https://github.com/nikic/php-src/tree/addGeneratorsSupport.I also created a PR so that the diff can be viewed more easily: https://github.com/php/php-src/pull/177
Vote
Should generators be merged into master? | ||
---|---|---|
Real name | Yes | No |
aharvey (aharvey) | ||
alan_k (alan_k) | ||
cataphract (cataphract) | ||
felipe (felipe) | ||
googleguy (googleguy) | ||
hradtke (hradtke) | ||
iliaa (iliaa) | ||
ircmaxell (ircmaxell) | ||
jpauli (jpauli) | ||
juliens (juliens) | ||
laruence (laruence) | ||
lbarnaud (lbarnaud) | ||
levim (levim) | ||
lstrojny (lstrojny) | ||
mariuz (mariuz) | ||
mfonda (mfonda) | ||
mj (mj) | ||
nikic (nikic) | ||
patrickallaert (patrickallaert) | ||
peehaa (peehaa) | ||
pollita (pollita) | ||
sebastian (sebastian) | ||
seld (seld) | ||
stas (stas) | ||
tyrael (tyrael) | ||
Final result: | 24 | 1 |
This poll has been closed. |
相关文章推荐
- PHP的学习--生成器Generators
- 用PHP编写PDF文档生成器
- 素数生成器的算法【PHP EDITION】
- python yield和generators(生成器)
- python ‘yield’和‘Generators(生成器)’
- 【PHP应用】mysql数据字典生成器
- PHP5.5或将引入Generators
- 提高你的Python: 解释‘yield’和‘Generators(生成器)
- php实现在线生成条形码示例分享(条形码生成器)
- php实现在线生成条形码示例分享(条形码生成器)
- 用PHP编写PDF文档生成器
- php SQL之where语句生成器
- PM Report 4.6 发布,PHP 报表生成器
- 【Python 3这件小事】4. Generators(生成器)的传说
- Python Generators(生成器)——yield关键字
- 用PHP编写PDF文档生成器
- 用PHP编写PDF文档生成器
- php SQL之where语句生成器
- PHP plist 生成器
- Python解释yield和Generators(生成器)