vs2010出现 devenv.exe assert failure
2014-02-27 17:11
363 查看
vs2010出现 devenv.exe assert failure 解决办法,,
打开Visual Studio命令提示符下的“开始”菜单中(2010) - >所有程序- >微软Visual Studio 2010 - > Visual Studio工具(具有管理员权限运行:右键单击该程序- >以管理员身份运行);
Try some devenv switches in command prompt:
在命令提示符尝试一些devenv的开关:
Run
devenv / Resetsettings to eliminate the cause of corrupted settings.
运行 devenv /
Resetsettings消除设置损坏的原因。
Run
devenv
/ResetSkipPkgs in Command Prompt.
运行 devenv /命令提示符ResetSkipPkgs的 。
Run
devenv
/Safemode to see if you can apply it correctly.
运行 devenv /安全模式看看,如果你能正确地运用它。
This can eliminate the possibility that third party Add-ins or packages are causing problems.
这可以消除第三方加载项或包导致问题的可能性。
Reboot the machine in
Safe Mode.
在安全模式重新启动机器。 This can isolate some third party application/driver's interference.
这可以分离出一些第三方应用程序/驱动器的干扰。
Switch and try a new user account.
切换和尝试新的用户帐户。
This can rule out the possibility of corrupted user profile.
这可以排除损坏的用户配置文件的可能性。
打开Visual Studio命令提示符下的“开始”菜单中(2010) - >所有程序- >微软Visual Studio 2010 - > Visual Studio工具(具有管理员权限运行:右键单击该程序- >以管理员身份运行);
Try some devenv switches in command prompt:
在命令提示符尝试一些devenv的开关:
Run
devenv / Resetsettings to eliminate the cause of corrupted settings.
运行 devenv /
Resetsettings消除设置损坏的原因。
Run
devenv
/ResetSkipPkgs in Command Prompt.
运行 devenv /命令提示符ResetSkipPkgs的 。
Run
devenv
/Safemode to see if you can apply it correctly.
运行 devenv /安全模式看看,如果你能正确地运用它。
This can eliminate the possibility that third party Add-ins or packages are causing problems.
这可以消除第三方加载项或包导致问题的可能性。
Reboot the machine in
Safe Mode.
在安全模式重新启动机器。 This can isolate some third party application/driver's interference.
这可以分离出一些第三方应用程序/驱动器的干扰。
Switch and try a new user account.
切换和尝试新的用户帐户。
This can rule out the possibility of corrupted user profile.
这可以排除损坏的用户配置文件的可能性。
相关文章推荐
- VS2010 出现 devenv.exe -Assert Failure 错误
- 每次打开VS2010都会报“ devenv.exe -Assert Failure”这个错误
- VS2008或者VS2010出现devenv.exe 系统错误
- VS2010 OPNECV2.4 安装后出现devenv.exe错误提示——解决方法。
- vs2010出现devenv.exe占用100%CPU解决办法
- VS2010 打包生成exe文件后 运行安装文件出现 TODO:<文件说明>已停止工作并已关闭
- 修复Win8下VS2010安装DevExpress后报devenv.exe assert failure错误的方法
- win8.1安装vs2010,再安装DEV控件后后报devenv.exe assert failure错误
- VS2010:出现devenv.sln解决方案保存对话框
- vs2010 出现错误“AxImp.exe”已退出,代码为 -1163019603。
- VS2010编译是出现mt.exe找不到的解决方案
- VS2010 编译生成总出现exe写入错误
- VS2010中程序编译生成都是正确的,直接生成的exe也是正确的,就是在VS中运行出现错误
- devenv.exe - assert failure
- devenv.exe 应用程序错误 vs2010
- vs2010 devenv.exe-Assert Failure錯誤解決
- 升级项目到Vs2010,编译时出现:MSB6006: “LC.exe”已退出,解决方法
- VS2010 打包生成exe文件后 执行安装文件出现 TODO:<文件说明>已停止工作并已关闭
- 升级项目到Vs2010,编译时出现:MSB6006: “LC.exe”已退出,解决方法
- VS2008打开时出现devenv.exe 应用程序错误 该内存不能为written