erro: "Instantiation of '***' failed. The design unit was not found"

在FPGA的设计中，经常会遇到此类问题，如题目所示--"erro: Instantiation of '***' failed. The design unit was not found"，之前在QUARTUS中编译都能成功，然而到了用Modelsim仿真时，就出现这个问题，之后也在网上查阅了许多的资料，都没得到想要的答案。后来终于在国外的一篇博文中得到解答。

其问题在于，我们在用HDL输入时，仿真调试没有问题，而将调试成功的HDL生成一个可调用电路元件符号，然后再用该元件符号去构成其它电路，没有原理性错误时，在仿真过程中就回出现以上问题。此处说明：HDL没有语法错误，逻辑性错误页应该没有！那出现错误的地方只可能是这个调用的过程中了。有个常识性的知识大家应该很清楚：在Modelsim中只能新建HDL类的文件，而不能采用原理图输入的方式。这就是症结所在！换句话说Modelsim不能识别”原理图输入“方式，得知这一点，就知道该怎么改了。只需要将自己完成的原理图文件倒腾一下，生成HDL文件格式，在进行编译和仿真，应该就没有问题了。（当然，注意一点：在QUARTUS中的Project
Navigator中的Files一栏中，最好不要同时出现原理图文件.bdf和HDL文件.v，不信可以试试，一般情况下会提示ERRO）。至于上面提到的将原理图文件怎么变成HDL文件，相信都知道怎么实现。提示一下：与将HDL生成Symbol file 是一个互为相反的过程。具体步骤一样，有不明白的可以提问。

PS:来源于：Idle logic, by Chris Zeh

Simulating the Virtual JTAG in ModelSim

Here I’m going to demonstrate how to use ModelSim to test out the Virtual JTAG design that I showed in my

previous post.

If you’re new to ModelSim with Quartus II, I recommend you look at a post I made awhile back which serves as a quick crash course:

Using ModelSim with Quartus II and the DE0-Nano

Quartus II

The first step is to open the Virtual JTAG project we created in the
previous post.

Here is the top-level schematic:

Adding vJTAG Stimulus

The next step is to setup the stimulus for the Virtual JTAG block which is done by using the vJTAG’s megafunction wizard.

First double click the

vJTAG

block to launch the wizard:





Now keep clicking

Next>

until you get to the

General > Stimulation Stimuli

tab.

Add in the stimulus as I’ve shown in the image below which is simulating both the Instruction Register (IR), and the Data Register (DR) transmissions:





(See if you can spot the mistake I made in the stimulus. I completely missed it when first setting up this demo but it becomes obvious once we look at the simulation.)

Now, if you’re curious like I am and are wondering what/where this stimulus information is stored, navigate and open the vJTAG.v file within the vJTAG.qip in the Project Explorer:

Convert HDL from Schematic

Unfortunately, ModelSim doesn’t allow the top-level to be a schematic file (.bdf), however Quartus has provided us with a handy tool that quickly generates a Verilog file from a schematic.

From the menu, use

File > Create / Update > Create HDL Design File from Current File...

Since the free version of ModelSim only allows you to simulate with a single HDL language, and not mixed, be sure to select Verilog HDL in the dialog box:




Next, you will need to add this newly created Verilog file to your project, right click on the

Files

in the

Project Navigator

:





Followed by selecting and adding the file in the subsequent dialog box:





Unfortunately, you’ll also have to remove the

InitialTest.bdf

schematic from the project, otherwise Quartus will complain about duplicate declarations of the InitialTestblock. (I want to write a nice TCL script that can help automate
this dance, but currently we’ll have to do this manually.)

Just right click on the schematic and click remove. (Don’t worry this won’t delete the schematic by default.)

Starting ModelSim

You’ll need to run the Analysis & Synthesis portion of the compilation process to prepare the files for ModelSim:





If you get the error: Can’t compile duplicate declarations of entity “InitialTest” into library “work”. Make sure to remove the

InitialTest.bdf

schematic from the project.

Using the

Tools > Run Simulation Tool > RTL Simulation

menu to automatically launch ModelSim and push the design over:





If you get an error at this point, double check to be sure your design is configured to use ModelSim-Altera Version (Setting it to the vanilla version of ModelSim won’t work), also ensure that in the

Tools > Options

the path to the ModelSim-Altera is set
correctly.

Working with ModelSim

Once ModelSim has started, you should see your

InitialTest

project within the

work

library





Next, Start the Simulation using the option in the

Simulate

menu





Set the

Design Unit

to

work.InitialTest

In order to support the vJTAG megafunction block, you’ll need to add the megafunction library to the sim. Add the

altera_mf_ver

library using the

Libraries

tab. The

_ver

suffix selects the verilog version of the library. If you omit this ModelSim will try to use the VHDL version and fail.





After the simulation layout loads, add the signals shown here to the Wave view:





Now advance some simulation time to generate the waveforms:





You should see something like the following picture. Looking closely you will see four pulses on the tck signal, corresponding to the stimulus we setup earlier.





Zooming in on the first stimulus event, we see an Instruction Register (IR) shift, switching the ir_in to 1, and thereby asserting the select_DR1 signal





Now zooming in on the second stimulus event, we find the Data Register (DR) shift. We find the tdi signal is captured on the

DR1[6:0]

register, and once the update data register (udr) signal asserts, the

LEDs

are updated.





Next, zooming in on the 3rd stimulus event, we find the IR is set back to 0 (setup to be the “bypass” register)





Now finally looking at the last stimulus event, the DR register is updated, but as we alluded to above, I made a mistake in setting up my stimulus. Instead of the DR-Shift being 0×15 the Bit length was set to 1, and as you can see the DR0 is updated to a
setting of 1 instead:





Hopefully that was informative. Feel free to leave a comment if you have any questions, or just to let me know if this was helpful to you.