Dell服务器各种RAID卡介绍及监控方法

Dell服务器RAID卡介绍及监控

本文包含如下内容一、Dell服务器 RAID卡介绍二、阵列卡的Stripe size介绍三、megacli介绍、安装、使用、crontab监控脚本四、查看SAS 6/iR卡的信息五、DELL服务器的各种RAID卡的详细参数

一、Dell服务器 RAID卡介绍

以下在系统下使用相关命令得到的数据，dell支持的各种RAID卡的详细参数参见本文第五部分。

1、内部RAID控制器

使用megacli命令查看得到的RAID卡数据：SAS 6/iR ：只支持2块硬盘做 raid0，或者raid1，或者不做阵列卡 (Dell硬件聊天室获得)PERC 6/i IntegratedMemory Size: 256MBRAID Level Supported: RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supportedSupported Drives: SAS, SATAMin Stripe Size: 8 KBMax Stripe Size: 1.0 MB接口速度Link Speed: 3.0Gb/s PERC H700 IntegratedMemory Size: 512MBRAID Level Supported: RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanningSupported Drives: SAS, SATAMin Stripe Size: 8 KBMax Stripe Size: 1.0 MB接口速度Link Speed: 6.0Gb/s 官方资料：PERC H200（6 Gb/秒）PERC H700（6Gb /秒），配备512 MB非易失性高速缓存PERC H700（6 Gb/秒），配备512 MB电池后备高速缓存；512 MB、1 G非易失性电池后备高速缓存PERC 6/i，配备256 MB电池后备高速缓存

2、外部RAID控制器

官方资料：PERC H800（6Gb/秒），配备512 MB非易失性高速缓存PERC H800（6Gb/秒），配备512 MB电池后备高速缓存；512 MB、1 G非易失性电池后备高速缓存PERC 6/E，配备256 MB或512 MB电池后备高速缓存

二、阵列卡的Stripe size介绍

Stripe size 默认64KB。

1、Stripe size百科介绍

在每个磁盘上连续写入数据的总量，也称作“条带深度”。你可以指定每个逻辑驱动器的条带容量从2KB，4KB，8KB一直到128KB。为了获得更高的性能，要选择条带的容量等于或小于操作系统的簇的大小。大容量的条带会产生更高的读取性能，尤其在读取连续数据的时候。而读取随机数据的时候，最好设定条带的容量小一点。如果指定128KB的条带将需要8MB内存。不同Stripe size的选择直接影响性能，如IOPS和吞吐量。Stripe size值小，通过多块磁盘响应多个I/O请求，可以增加I/O访问速率（IOPS）Stripe size值大，通过多块磁盘响应一个I/O请求，可以增加数据传输速率（Mbps）我们知道顺序和随机对于带宽和iops的需求成反比，即顺序的读写比较消耗带宽，随机的读写比较消耗iops；

2、Stripe size一般设置

通常，小Stripe size适用于数据库，一般Stripe size适用于文件服务器，大Stripe size适用于多煤体应用。实际应用stripe size大小应在效率测试后具体设置。数据库一般4-16KBweb服务器默认即可，16-64KB流媒体等大文件建议128KB以上

三、megacli介绍、安装、使用、crontab监控脚本

查看RAID信息的工具有mpt-status、megarc、dell OpenManage。经测试只有megacli可以实现目标，dell OpenManage由于较大90M左右没有安装。megacli工具非常强大，不仅能查看RAID卡信息，而且还能设置RAID卡，但是不支持SAS 6/iR的RAID卡，不推荐采用megacli在线设置RAID卡，本文也仅用于监控挂接在RAID上的硬盘状态。

1、查看raid卡的型号：

root@3:~# lspci |grep RAID H70002:00.0 RAID bus controller: LSI Logic / Symbios Logic Device 0079 (rev 04)root@3:~# lspci |grep RAID PERC 6/i03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)root@k:~# lspci|grep SAS SAS 6/iR03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)

2、安装megacli

root@3:~# more /etc/apt/sources.list增加如下源：##add monitor dell perc 6/i raidcontroller's sourcedeb http://hwraid.le-vert.net/debian lenny main root@3:~# apt-get updateroot@3:~# apt-get install megacli

3、使用megacli查看RAID卡信息

术语：BBU 电池备份单元(Battery Backup Unit)常用查看命令：megacli -LDInfo -Lall -aALL 查raid级别megacli -AdpAllInfo -aALL 查raid卡信息megacli -PDList -aALL 查看硬盘信息megacli -AdpBbuCmd -aAll 查看电池信息megacli -FwTermLog -Dsply -aALL 查看raid卡日志megacli -adpCount 显示适配器个数megacli -AdpGetTime –aALL 显示适配器时间megacli -AdpAllInfo -aAll 显示所有适配器信息megacli -LDInfo -LALL -aAll 显示所有逻辑磁盘组信息megacli -PDList -aAll 显示所有的物理信息megacli -AdpBbuCmd -GetBbuStatus -aALL |grep ‘Charger Status’ 查看充电状态megacli -AdpBbuCmd -GetBbuStatus -aALL 显示BBU状态信息megacli -AdpBbuCmd -GetBbuCapacityInfo -aALL 显示BBU容量信息megacli -AdpBbuCmd -GetBbuDesignInfo -aALL 显示BBU设计参数megacli -AdpBbuCmd -GetBbuProperties -aALL 显示当前BBU属性megacli -cfgdsply -aALL 显示Raid卡型号，Raid设置，Disk相关信息

4、使用crontab定时监控硬盘状态的小脚本

该脚本实现在监控到硬盘故障时发出报警邮件，并关联到手机短信，以便通知运维人员及时处理。root@3:~# more /backup/autobackup/autoshell/check_raid_disk_health #!/bin/shlog_dir=/backup/autobackup/logsum/log_name=_raid_disk_monitorlogtime=$(date +%Y%m%d --date='1 days ago')fix=.loghost=_`hostname`STATUS=0echo "Checking RAID status on $host" >$log_dir$logtime$log_name$host$fixRAID_Contrller=`megacli -AdpAllInfo -aALL |grep "Product Name" | cut -d: -f2`echo "Controller : $RAID_Contrller" >>$log_dir$logtime$log_name$host$fixOnline_disk_num=`megacli -PDList -aALL | grep Online | wc -l`echo "Totall number of Physical disks online : $Online_disk_num" >>$log_dir$logtime$log_name$host$fixDegrade_disk=`megacli -AdpAllInfo -a0 |grep "Degrade"`echo $Degrade_disk >>$log_dir$logtime$log_name$host$fixDegrade_disk_num=`echo $Degrade_disk |cut -d" " -f3`Failed_disk=`megacli -AdpAllInfo -a0 |grep "Failed Disks"`echo $Failed_disk >>$log_dir$logtime$log_name$host$fixFailed_disk_num=`echo $Failed_disk |cut -d" " -f4`##将raid_disk_monitor.log scp到mail上scp -P120 $log_dir$logtime$log_name$host$fix lai@60.*.*.*:/data/autobackup/logsumssh -p120 lai@60.1.1.1 "cat /data/autobackup/logsum//$(date +%Y%m%d --date='1 days ago')_raid*| mail -s "`echo "/$(date +%Y'年'%m'月'%d'日' --date='1 days ago')ERROR:tv233_RAID卡硬盘报警"|iconv -f utf-8 -t gbk`" postmaster@126.com,1860531****@wo.com.cn -- -f www@xp.com"[ "$Degrade_disk_num" -ne 0 ] && STATUS=1[ "$Failed_disk_num" -ne 0 ] && STATUS=1exit $STATUS

四、查看SAS 6/iR卡的信息

因为megacli不支持SAS 6/iR卡，使用一款叫做lsiutil的绿色免安装工具来查看SAS 6/iR卡的信息。

1、下载lsiutil

官网下载地址ftp://ftp.lsil.com/HostAdapterDrivers/linux/lsiutil/lsiutil.tar.gz

2、解压运行lsiutil

直接解压,运行目录里面的lsiutil 即可.[root@k]# tar -zxvf lsiutil.tar.gz[root@k]# cd lsiutil[root@k]# ./lsiutil 【交互式运行】LSI Logic MPT Configuration Utility, Version 1.56, March 19, 20081 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. /proc/mpt/ioc0 LSI Logic SAS1068E B3 105 00192f00 0Select a device: [1-1 or 0 to quit] 1 1. Identify firmware, BIOS, and/or FCode 2. Download firmware (update the FLASH) 4. Download/erase BIOS and/or FCode (update the FLASH) 8. Scan for devices10. Change IOC settings (interrupt coalescing)13. Change SAS IO Unit settings16. Display attached devices20. Diagnostics21. RAID actions22. Reset bus23. Reset target42. Display operating system names for devices45. Concatenate SAS firmware and NVDATA files60. Show non-default settings61. Restore default settings69. Show board manufacturing information97. Reset SAS link, HARD RESET98. Reset SAS link99. Reset port e Enable expert mode in menus p Enable paged mode w Enable loggingMain menu, select an option: [1-99 or e/p/w or 0 to quit] 69 --- 查看Raid 卡的信息板子名称【SAS6IR】Seg/Bus/Dev/Fun Board Name Board Assembly Board Tracer 0 2 0 0 SAS6IRMain menu, select an option: [1-99 or e/p/w or 0 to quit] 8 ---扫描硬盘设备并打印设备状态SAS1068E's links are 3.0 G, 3.0 G, down, down, off, off, off, off B___T___L Type Vendor Product Rev SASAddress PhyNum 0 0 0 Disk Dell VIRTUAL DISK 1028 0 8 0 EnclServ DP BACKPLANE 1.07 5942b0b02dcf1a00 8Hidden RAID Devices: B___T Device Vendor Product Rev SASAddress PhyNum 0 1 PhysDisk 0 SEAGATE ST3600057SS ES62 5000c50023c4b95d 1 0 9 PhysDisk 1 SEAGATE ST3600057SS ES62 5000c50023c4bd95 0【查看Raid 状态】: 进入21 选项:Main menu, select an option: [1-99 or e/p/w or 0 to quit] 21 1. Show volumes 2. Show physical disks 3. Get volume state 4. Wait for volume resync to complete23. Replace physical disk26. Disable drive firmware update mode27. Enable drive firmware update mode30. Create volume31. Delete volume32. Change volume settings33. Change volume name50. Create hot spare99. Reset port e Enable expert mode in menus p Enable paged mode w Enable loggingRAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 2 ---查看设备在线状态1 volume is active, 2 physical disks are activePhysDisk 0 is Bus 0 Target 1 PhysDisk State: online PhysDisk Size 572325 MB, Inquiry Data: SEAGATE ST3600057SS ES62Warning, page length in reply does not match page length in buffer (9 vs. 15)PhysDisk 1 is Bus 0 Target 9 PhysDisk State: online PhysDisk Size 572325 MB, Inquiry Data: SEAGATE ST3600057SS ES62Warning, page length in reply does not match page length in buffer (9 vs. 15)注意，因为我的两块硬盘做得是Raid 0 ，如果你的磁盘做得是Raid 1 可以通过 【4. Wait for volume resync to complete】两块硬盘的同步状态RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 4 ---我的是Raid 0Volume 0 State: optimal, enabled以下几个菜单可以在线创建阵列！30. Create volume31. Delete volume32. Change volume settings33. Change volume name50. Create hot spare#注意以上所有的退出使用阿拉数字零

3、非交互方式查看SAS 6/iR卡信息

如果你觉得上面的菜单选项比较麻烦，你也可以使用命令行模式完成！如下:lsiutil –p1 –a 8,21,4,0,0-p1 指1 MPT Port found-a 指你选择的菜单号,并使用逗号分开.0表示退出参数------即进入几个菜单，就是用几个0 做退出！[root@k]# ./lsiutil -p1 -a 8,21,4,0,0LSI Logic MPT Configuration Utility, Version 1.56, March 19, 20081 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. /proc/mpt/ioc0 LSI Logic SAS1068E B3 105 00192f00 0Main menu, select an option: [1-99 or e/p/w or 0 to quit] 8SAS1068E's links are 3.0 G, 3.0 G, down, down, off, off, off, off B___T___L Type Vendor Product Rev SASAddress PhyNum 0 0 0 Disk Dell VIRTUAL DISK 1028 0 8 0 EnclServ DP BACKPLANE 1.07 5942b0b02dcf1a00 8Hidden RAID Devices: B___T Device Vendor Product Rev SASAddress PhyNum 0 1 PhysDisk 0 SEAGATE ST3600057SS ES62 5000c50023c4b95d 1 0 9 PhysDisk 1 SEAGATE ST3600057SS ES62 5000c50023c4bd95 0Main menu, select an option: [1-99 or e/p/w or 0 to quit] 21RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 4Volume 0 State: optimal, enabledRAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 0 Main menu, select an option: [1-99 or e/p/w or 0 to quit] 0[root@k]#

五、DELL服务器的各种RAID卡的详细参数

1、SAS 6/iR Features

This section provides the specifications of Dell邃｢ Serial-Attached SCSI (SAS) 6/iR controller. The following table compares the specifications of the SAS 6/iR Adapter and SAS 6/iR Integrated.Table 3-1. Specifications of SAS 6/iR

Specification	SAS 6/iR Adapter	SAS 6/iR Integrated
SAS technology	Yes	Yes
Support for x4, x8, or x16 PCI Express Host Interface	Yes	Yes
Form Factor	Standard-Height, Half-Length PCI Adapter	Standard-Height, Half-Length PCI on all systems except on blade servers (where the dimension do not follow industry standards) and some Precision workstations (where the controller has been integrated on the mother board)
I/O controller (IOC)	LSI SAS 1068e	LSI SAS 1068e
Core Speed: 255 MHz	Core Speed: 255 MHz
Operating voltage requirements	+12V, +3.3V, +3.3Vaux	+12V, +3.3V, +3.3Vaux
Communication to the system	PCI-E lanes	System dependent
Communication to end devices	SAS Links	SAS Links
SAS Connectors	2 x4 Internal	2 x4 Internal connectors on all systems, with two exceptions: 4 x1 on Precision workstations with controller integrated on the motherboard, no SAS connector on the controller for the blades (I/O is routed though the PCI connector)
Lead Free	Yes	Yes
Supported operating systems	Microsoftﾂｮ Windows Serverﾂｮ2003 Family, Windowsﾂｮ XP, Microsoft Windows Server 2008 Family, Windows Vista邃｢, Red Hatﾂｮ Enterprise Linuxﾂｮ Versions 4 and 5, SUSEﾂｮ Linux Enterprise Server Version 10.
Dell-compliant SAS and SATA compatibility	Yes	Yes
Dell supported direct connected end devices	Dell-compliant physical disks	Dell-compliant physical disks
SMART error support through management applications	Yes	Yes
Backplane supported systems	Yes	Yes
Hardware-based RAID	RAID 0, RAID 1	RAID 0, RAID 1
Maximum number of virtual disks	2	2
Storage management software	OpenManage邃｢ Storage Services, SAS RAID Storage Manager	OpenManage Storage Services, SAS RAID Storage Manager
NOTE:The management software that is supported depends on the specific platform.
Support for internal tape drive	No	No
Support for Global Hotspare	Yes	Yes
Maximum number of Hotspares	2	2

2、Dell所有RAID参数对比表

DellTM PERC Products

Model	Interface Support	PCI Support	SAS Connectors	Cache Memory Size	Write Back Cache	RAID Levels	Max Drive Support	RAID Support
PERC H800 Adapter	6Gb/s SAS	PCI-Express 2.0	2x4 external	512MB 512MB NV 1GB NV	Yes (TBBU)	0,1,5,6,10,50,60	192	Hardware RAID
PERC H700 Integrated / Adapter	6Gb/s SAS	PCI-Express 2.0	2x4 internal	512MB 512MB NV 1GB NV	Yes (BBU)	0,1,5,6,10,50,60	16	Hardware RAID
PERC H700 Modular	6Gb/s SAS	PCI-Express 2.0	1x4 internal	512MB	Yes (BBU)	0,1,5,6,10	4	Hardware RAID
PERC H200 Integrated / Adapter	6Gb/s SAS	PCI-Express 2.0	2x4 internal	-	-	0,1,10,supports Non-RAID	16	Hardware RAID
PERC H200 Modular	6Gb/s SAS	PCI-Express 2.0	1x4 internal	-	-	0,1,10,supports Non-RAID	4	Hardware RAID
6Gbps SAS HBA	6Gb/s SAS	PCI-Express 2.0	2x4 External	-	-	-	-	HBA Hardware
PERC 6/E Adapter	3Gb/s SAS	PCI-Express 1.0	2x4 external	512MB 256MB	Yes (TBBU)	0,1,5,6,10,50,60	144	Hardware RAID
PERC 6/I Integrated / Adapter	3Gb/s SAS	PCI-Express 1.0	2x4 internal	256MB	Yes (BBU)	0,1,5,6,10,50,60	16	Hardware RAID
PERC 6/I Modular	3Gb/s SAS	PCI-Express 1.0	1x4 internal	256MB	Yes (BBU)	0,1,5,6,10	4	Hardware RAID
CERC 6/I Modular	3Gb/s SAS	PCI-Express 1.0	1x4 internal	128MB	-	0,1,5,6,10	4	Hardware RAID
SAS 6/IR Integrated / Adapter	3Gb/s SAS	PCI-Express 1.0	2x4 internal	-	-	0,1	8	Hardware RAID
SAS 6/IR Modular	3Gb/s SAS	PCI-Express 1.0	1x4 internal	-	-	0,1	4	Hardware RAID
PERC S300 Windows OS only	3Gb/s SAS	PCI-Express 1.0	2x4 internal	-	-	0,1,10,5	8	Software RAID on HBA
PERC S100 Windows OS only	3Gb/s SAS	-	4 cabled SATA	-	-	0,1,10,5	4	Software RAID on SATA chipset
SAS 5/E HBA	3Gb/s SAS	PCI-Express 1.0	2x4 external	-	-	-	-	HBA Hardware