Ubuntu 10.10 安装配置LAMP(转)
2010-12-31 15:57
513 查看
Installing Apache MySQL, PHP and phpmyadmin on Ubuntu
10.10 Maverick Meerkat is far easier and less complicated than doing the same on Fedora
13, (my own experience).
Step 1:
You start by installing mysql
sudo apt-get install mysql-client mysql-server
Specify
new password for the MySQl “root” user when prompted. Repeat it for a
second time and you would have MySQL server and client installed.
Step 2:
Next, install
Apache2:
sudo apt-get install apache2
And
you get apache2 installed as well. To double check, point your browser
to http://localhost, and you should see the Apache2 placeholder page
like this.
Step 3:
To install support for PHP, do the usual
sudo apt-get install php5 libapache2-mod-php5
To verify that everything installed correctly and php support is enabled, you need torestart apache
by doing this
sudo /etc/init.d/apache2 restart
Create a test php file called info.php
, using a text editor of your choice (say gedit)
sudo gedit /var/www/info.php
and paste the following content and save the file
<?php phpinfo(); ?>
Now open the following page http://localhost/info.php and you should see something like this
Step 4:
To make MySQL, php and apache talk among themselves, you would have to
install php5-mysql, below I am listing some more useful packages that
you might want to install
sudo apt-get install php5-mysql
php5-curl php5-gd php5-idn php-pear php5-imagick php5-imap php5-mcrypt
php5-memcache php5-ming php5-ps php5-pspell php5-recode php5-snmp
php5-sqlite php5-tidy php5-xmlrpc php5-xsl php5-common
Now
refresh the info.php page that you have open in your browser and you
should be able to see the support for mysql if you search for it by
doing Ctrl+f, but before that don’t forget to restart apache again (sudo
/etc/init.d/apache2 restart)
Step 5:
Finally install phpmyadmin
sudo apt-get install phpmyadmin
It
would ask if you want to configure it automatically for apache or
lightppd choose apache (by pressing “spacebar” to display a star as
shown below and then use tab to navigate to Ok and press
enter.www.linuxidc.com
It would be automatically configured, however it would ask if you want a database installed and configured, choose yes
and press enter
On the next screen you would be asked to enter the MySQL root password, that you provided in first step
next it would ask you to enter a password to be used by phpmyadmin to register with thedatabase
(basically it would create a user called “phpmyadmin” the password is
for that, most likely you won’t be needing this password ever. You can
even choose to assign a random password for it. www.linuxidc.com
Confirm
that password on the next screen. Once you have made your choices the
installation would finish and you should be able to access phpmyadmin by
pointing your web browser to http://localhost/phpmyadmin/
10.10 Maverick Meerkat is far easier and less complicated than doing the same on Fedora
13, (my own experience).
Step 1:
You start by installing mysql
sudo apt-get install mysql-client mysql-server
Specify
new password for the MySQl “root” user when prompted. Repeat it for a
second time and you would have MySQL server and client installed.
Step 2:
Next, install
Apache2:
sudo apt-get install apache2
And
you get apache2 installed as well. To double check, point your browser
to http://localhost, and you should see the Apache2 placeholder page
like this.
Step 3:
To install support for PHP, do the usual
sudo apt-get install php5 libapache2-mod-php5
To verify that everything installed correctly and php support is enabled, you need torestart apache
by doing this
sudo /etc/init.d/apache2 restart
Create a test php file called info.php
, using a text editor of your choice (say gedit)
sudo gedit /var/www/info.php
and paste the following content and save the file
<?php phpinfo(); ?>
Now open the following page http://localhost/info.php and you should see something like this
Step 4:
To make MySQL, php and apache talk among themselves, you would have to
install php5-mysql, below I am listing some more useful packages that
you might want to install
sudo apt-get install php5-mysql
php5-curl php5-gd php5-idn php-pear php5-imagick php5-imap php5-mcrypt
php5-memcache php5-ming php5-ps php5-pspell php5-recode php5-snmp
php5-sqlite php5-tidy php5-xmlrpc php5-xsl php5-common
Now
refresh the info.php page that you have open in your browser and you
should be able to see the support for mysql if you search for it by
doing Ctrl+f, but before that don’t forget to restart apache again (sudo
/etc/init.d/apache2 restart)
Step 5:
Finally install phpmyadmin
It
would ask if you want to configure it automatically for apache or
lightppd choose apache (by pressing “spacebar” to display a star as
shown below and then use tab to navigate to Ok and press
enter.www.linuxidc.com
It would be automatically configured, however it would ask if you want a database installed and configured, choose yes
and press enter
On the next screen you would be asked to enter the MySQL root password, that you provided in first step
next it would ask you to enter a password to be used by phpmyadmin to register with thedatabase
(basically it would create a user called “phpmyadmin” the password is
for that, most likely you won’t be needing this password ever. You can
even choose to assign a random password for it. www.linuxidc.com
Confirm
that password on the next screen. Once you have made your choices the
installation would finish and you should be able to access phpmyadmin by
pointing your web browser to http://localhost/phpmyadmin/
相关文章推荐
- (转载)ubuntu 10.10 安装配置LAMP
- Ubuntu 10.10如何安装配置LAMP
- Ubuntu 10.10 安装配置LAMP
- Ubuntu10.10上配置安装LAMP
- Ubuntu 10.10 下安装与配置 MongoDB 1.6.5
- 在Ubuntu 10.10下安装JDK配置Eclipse及Tomcat
- Ubuntu 12.04下LAMP环境的安装配置
- Ubuntu server 10.04安装配置lamp服务器
- Ubuntu10.10 下使用RPM包安装配置mysql5.5
- 安装ubuntu10.10后,如何配置一个Apache+MySQL+PHP环境
- 在Ubuntu 10.10下安装JDK配置Eclipse及Tomcat【转载 + 订正】
- ubuntu 12.04下LAMP安装配置
- Ubuntu下LAMP安装配置
- Ubuntu 10.10安装与配置jdk
- Ubuntu 12.04 安装配置LAMP
- ubuntu下lamp安装配置环境phpmyadmin
- 在Ubuntu 10.10下安装JDK配置Eclipse及Tomcat
- Ubuntu利用tasksel安装配置lamp环境
- ubuntu安装lamp&&mysql中修改配置文件显示中文&&强大的vim配置&&c++连接Mysql
- 在Ubuntu 10.10下安装JDK配置Eclipse及Tomcat