Xilinx 驱动的安装方法 其它非标准usb设备的安装方法类似
2009-12-17 15:29
519 查看
在linux下经常要安装一些设备,但是linux下又不像windows一样有能自动检测到设备有没有连接到,所以 安装usb等设备就有一些困难,下面我以xilinx为例进行介绍:
首先确认设备有没有连接
查看 /var/log/messages
[root@digican108 ~]# tail -f /var/log/messages
Dec 17 13:53:52 digican108 gpm[8048]: imps2: Auto-detected intellimouse PS/2
Dec 17 13:54:18 digican108 kernel: usbcore: registered new driver windrvr6_0
Dec 17 13:56:15 digican108 gconfd (root-8754): 閫€鍑?
Dec 17 13:59:57 digican108 kernel: usb 1-6: USB disconnect, address 29
Dec 17 13:59:58 digican108 kernel: usbcore: deregistering driver windrvr6_0
Dec 17 13:59:57 digican108 kernel: usb 1-6: USB disconnect, address 29
Dec 17 13:59:58 digican108 kernel: usbcore: deregistering driver windrvr6_0
Dec 17 14:02:49 digican108 sshd(pam_unix)[10201]: session closed for user root
Dec 17 14:02:53 digican108 sshd(pam_unix)[8489]: session closed for user root
Dec 17 14:25:25 digican108 htt_server[8080]: Client shut down the connection owned by im_id(1).
Dec 17 14:25:25 digican108 last message repeated 2 times
Dec 17 14:53:50 digican108 sshd(pam_unix)[11487]: session opened for user root by (uid=0)
如果没有驱动,测在deregistering 则显示为disconnect
则要安装相关驱动,安装方法如下:
注意将驱动文件名install_drivers.tar.gz.rar改为install_drivers.tar.gz
1) Disconnect all Xilinx USB cables from the host computer.
2) Open a shell or terminal console.
3) Extract the driver script and its support files to a local drive of the machine
where the cable will be used by typing:
tar xzvf install_drivers.tar.gz
The extraction creates a directory named install_drivers in the current directory.
4) Navigate to the install_drivers directory by typing:
cd install_drivers
5) Run the script by typing:
./install_drivers
6) When the installation is complete, reconnect the cable.
7. Change permissions on the USB / PC4 driver by typing: chmod 666 /dev/windrvr6.
附件:http://down.51cto.com/data/2354773
首先确认设备有没有连接
查看 /var/log/messages
[root@digican108 ~]# tail -f /var/log/messages
Dec 17 13:53:52 digican108 gpm[8048]: imps2: Auto-detected intellimouse PS/2
Dec 17 13:54:18 digican108 kernel: usbcore: registered new driver windrvr6_0
Dec 17 13:56:15 digican108 gconfd (root-8754): 閫€鍑?
Dec 17 13:59:57 digican108 kernel: usb 1-6: USB disconnect, address 29
Dec 17 13:59:58 digican108 kernel: usbcore: deregistering driver windrvr6_0
Dec 17 13:59:57 digican108 kernel: usb 1-6: USB disconnect, address 29
Dec 17 13:59:58 digican108 kernel: usbcore: deregistering driver windrvr6_0
Dec 17 14:02:49 digican108 sshd(pam_unix)[10201]: session closed for user root
Dec 17 14:02:53 digican108 sshd(pam_unix)[8489]: session closed for user root
Dec 17 14:25:25 digican108 htt_server[8080]: Client shut down the connection owned by im_id(1).
Dec 17 14:25:25 digican108 last message repeated 2 times
Dec 17 14:53:50 digican108 sshd(pam_unix)[11487]: session opened for user root by (uid=0)
如果没有驱动,测在deregistering 则显示为disconnect
则要安装相关驱动,安装方法如下:
注意将驱动文件名install_drivers.tar.gz.rar改为install_drivers.tar.gz
1) Disconnect all Xilinx USB cables from the host computer.
2) Open a shell or terminal console.
3) Extract the driver script and its support files to a local drive of the machine
where the cable will be used by typing:
tar xzvf install_drivers.tar.gz
The extraction creates a directory named install_drivers in the current directory.
4) Navigate to the install_drivers directory by typing:
cd install_drivers
5) Run the script by typing:
./install_drivers
6) When the installation is complete, reconnect the cable.
7. Change permissions on the USB / PC4 driver by typing: chmod 666 /dev/windrvr6.
附件:http://down.51cto.com/data/2354773
相关文章推荐
- Xilinx 驱动的安装方法 其它非标准usb设备的安装方法类似
- Android 设备 USB 通用调试驱动的安装方法
- windows7出现MTP usb设备驱动安装问题解决方法
- android设备adb usb驱动安装方法
- windows 7 出现MTP usb设备驱动安装问题解决方法
- 安装USB--RS232驱动,提示设备无法启动,解决方法
- ubuntu14.04下安装xilinx USB JATG下载线的驱动的方法
- INSTALLSHILE+DPINST.EXE 安装设备驱动-设备驱动安装最佳方法之一
- 疑难声卡驱动,疑难显卡驱动,疑难网卡驱动便捷安装方法,根据硬件ID查找设备驱动
- linux网络设备应用与驱动编程学习4——模板与实例(C)——其它方法
- 如何解决Windows操作系统出现USB存储设备驱动安装不上的问题
- cc2540 usbdongle 安装驱动失败的终极解决方法 【原创,多图】
- USB设备每换一个新口,就要重新安装驱动
- win7 64位 下USB转COM驱动安装方法
- Platform Cable USB 的驱动重新安装方法
- Android USB Gadget复合设备驱动(打印机)测试方法
- Usb设备驱动1:root hub 设备驱动安装
- android万能USB驱动的安装方法.(针对开发人员 windows)
- Intel 7系列主板安装系统后提示未知设备(acpi\lba0001)解决方法 此驱动为电源管理
- USB2.0学习笔记连载(九):USB设备驱动的安装