VMware中Linux启动时***Host SMBus controller not enabled的解决方法
2018-05-02 20:10
1346 查看
Ubuntu18.04 64位
1.1如果能进入图形界面
在终端输入sudo su
键入root密码
//切换到root用户
1.2 如果不能进入图形界面,在VMware进入界面时按下shift进入GNU GRUB界面,依次选择*Advanced options for Ubuntu》*Ubuntu,with Linux ****(recovery mode)》root
2、输入mount -o remount,rw /
//对只读文件修改
此处根据报错内容不同,输入内容也不同比如我的错误为i2c_piix4 ******Host SMBus controller not enabled,那么我搜索piix4
3、输入lsmod | grep piix4
返回i2c_piix4 24576 0
那么报错的根源就在i2c_piix4
4、禁用报错的模块
输入vi + /etc/modprobe.d/blacklist.conf
//用vi打开并跳转到最后一行
按下o
//新建一行并插入
输入blacklist i2c_piix4
//i2c_piix4为刚才查询获得的
按下esc键入 :wq
//保存并退出
5、重新生成引导文件,如果不进行该操作直接重启还是会报错!
输入update-initramfs -u -k all
//重新生成引导文件!!!
再输入reboot重启即可
相关文章推荐
- 【ubuntu】VMware启动ubuntu时出现:SMBus Host Controller not enabled
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- VMware安装虚拟机Ubuntu提示piix4_smbus 0000:00:007.3: Host SMBus controller not enabled错误解决办法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- Host SMBus controller not enabled的解决方法
- Host SMBus controller not enabled的解决方法
- 针对piix4_smbus ****host smbus controller not enabled的解决方法
- 如何解决VMware Workstation上ubuntu出现Host SMbus controller not enabled
- VMware部署ubuntu提示piix4_smbus: Host SMBus controller not enabled!
- CentOS-7-i386-DVD-1708 root用户忘记密码解决过程最后一步出现Host SMBus controller not enabled的问题
- VMWARE里安装时出现'SMBus Host Controller not enabled'
- vmware:ubuntu piix4_smbus: Host SMBus controller not enabled
- Linux下无法启动oracle could not open parameter file 解决方法
- RAC 安装patch 后启动实例 报错 ORA-00439 feature not enabled- Real Application Clusters 解决方法
- Virtual Disk "hard disk 3' is not accessible on the host 虚拟机不能启动的解决方法