【华为】华为模拟器 huawei ensp 无线网路配置模拟
2018-01-02 11:25
5248 查看
LSW2: system-view int G0/0/1 port link-type trunk port trunk pvid 100 port trunk allow-pass vlan 100 101 quit int G0/0/2 port link-type trunk port trunk pvid 100 port trunk allow-pass vlan 100 102 quit int G0/0/3 port link-type trunk port trunk allow-pass vlan 100 to 102 quit
LSW1: int G0/0/2 port link-type trunk port trunk allow-pass vlan 100 to 102 int G0/0/3 port link-type trunk port trunk allow-pass vlan 100 to 102
AC端口基本配置 system-view vlan batch 100 to 102 int G0/0/1 port link-type trunk port trunk allow-pass vlan 100 to 102 quit
配置AC基本功能 [AC]WLAN ac-global ac id 1 carrier other [AC]WLAN ac-global country-code TW
配置DHCP功能和VLANIF接口 [AC] dhcp enable int vlanif 100 ip addr 10.1.100.1 24 dhcp select interface int vlanif 101 ip addr 10.1.101.1 24 dhcp select interface int vlanif 102 ip addr 10.1.102.1 24 dhcp select interface interface WLAN-ESS0 port hybrid untagged vlan 101 interface WLAN-ESS1 port hybrid untagged vlan 102
指定AC的源IP地址,使该AC下接入AP得到该AC地址都是指定的AC源IP地址 [AC]wlan (进入wlan view) [AC-WLAN-view]WLAN ac source interface vlanif 100
配置AC与AP互通 [AC-WLAN-view]ap-region id 101 [AC-WLAN-view]ap-region id 102 [AC-WLAN-view]ap-auth mode no-auth ap id 0 type-id 19 mac xxxx-xxxx-xxxx sn xxxxxxxxxxx (看AP的值) region-id 101 ap id 1 type-id 19 mac xxxx-xxxx-xxxx sn xxxxxxxxxxx (看AP的值) region-id 102
创建WMM模板 [AC]WLAN [AC-WLAN-view]wmm-profile name wmm-1 quit 创建射频模板 [AC-WLAN-view]radio-profile name radio-1 wmm-profile name wmm-1 quit 绑定AP的射频 ap 0 radio 0 (0: 2.4GHZ 1: 5GHZ) radio-profile name radio-1 quit ap 1 radio 0 radio-profile name radio-1
配置AP的服务集 1) 创建安全模板 [AC-WLAN-view] security-profile name security-1 id 1 wep authentication-method open-system security-policy wep quit 2)创建流量模板 [AC-WLAN-view]traffic-profile name traffic-1 quit 3)创建服务集 [AC-wlan-view]service-set name huawei-1 ssid huawei-1 traffic-profile name traffic-1 security-profile name security-1 WLAN-ess 0 service vlan 101 [AC-wlan-view]service-set name huawei-2 ssid huawei-2 traffic-profile name traffic-1 security-profile name security-1 WLAN-ess 1 service vlan 102 quit forward-mode direct-forward
配置VAP [AC-WLAN-view]ap 0 radio 0 service-set name huawei-1 [AC-WLAN-view]ap 1 radio 0 service-set name huawei-2 quit [AC-WLAN-view]commit ap 0 [AC-WLAN-view]commit ap 1
专案下载:
https://drive.google.com/open?id=19gmH3ExfqEg9bRRstOLBouZ67ciZ8vwD
下载下来后,因为网卡的部分必须要重新设置:
[AC-6605-wlan-view] undo ap-auth-mode undo ap id 0 undo ap id 1 ap-auth-mode no-auth 等一阵子,在通讯过后,会找到ap0、ap1 的资讯 (MAC,SN) **要特别注意哪一个是ap0 ,哪一个是ap1(比对MAC) ap-region id 102 ap id 0 ap-region id 101 ap id 1 ap 0 radio 0 radio-profile name radio-1 ap 1 radio 0 radio-profile name radio-1 ap 0 radio 0 service-set name huawei-2 ap 1 radio 0 service-set name huawei-1 quit commit ap 0 commit ap 1 (注意,在回应y的时候,要大写Y)
~若文章中有写错或无法执行,麻烦请大家发私讯给我,互相交流~
相关文章推荐
- 【华为】华为模拟器Huawei Ensp 静态路由案例实践
- 【华为】华为模拟器Huawei Ensp DHCP 连接原理
- 【华为】华为模拟器 huawei ensp 静态动态NAT ICMP 封包 wireshark抓包验证telnet明文传输密码
- 华为交换机模拟器为什么不能配置IP(或反)?如何在华为设备上配置远程管理设备?如何保存ENSP的配置
- 华为模拟器(ensp)交换机中配置vlan
- 思科/华为IS-IS协议基本配置命令(华为eNSP模拟器)
- 【华为】华为模拟器Huawei Ensp DHCP relay
- 华为eNSP模拟酒店无线wifi实验
- 【华为】华为模拟器Huawei Ensp 动态静态路由实践
- 【华为】华为模拟器Huawei Ensp 连接真实网络
- 【华为】华为模拟器 huawei ensp ACL
- 【华为】华为模拟器Huawei ENsp DHCP relay 案例实践
- 华为eNSP模拟器联系端口聚合配置实验
- HCNA之华为ensp配置心得与总结
- [模拟][NOIP2014]无线网路发射器选址
- 【华为】华为模拟器模拟PAT静态端口映射技术
- 思科模拟器无线配置
- 华为模拟器ensp安装教程