获取文件属性—stat、lstat、fstat
2017-11-14 14:12
519 查看
一、函数原型
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
int stat(const char *path, struct stat *buf);
int fstat(int fd, struct stat *buf);
int lstat(const char *path, struct stat *buf);
二、参数
1、path :文件名或者目录名
2、fd : 文件描述符
3、 struct stat {
dev_t st_dev; /* ID of device containing file */ // 文件的设备编号
ino_t st_ino; /* inode number */ // 结点
mode_t st_mode; /* protection */ // 文件的类型和存取的权限
nlink_t st_nlink; /* number of hard links */ // 连到该文件的硬链接数目,新建的文件则硬连接数为 1
uid_t st_uid; /* user ID of owner */ // 用户ID
gid_t st_gid; /* group ID of owner */ // 组ID
dev_t st_rdev; /* device ID (if special file) */ // 若此文件为设备文件,则为其设备的编号
off_t st_size; /* total size, in bytes */ // 文件字节数(文件大小)
blksize_t st_blksize; /* blocksize for filesystem I/O */ // 块大小
blkcnt_t st_blocks; /* number of 512B blocks allocated */ // 块数
time_t st_atime; /* time of last access */ // 最后一次访问时间
time_t st_mtime; /* time of last modification */ // 最后一次修改时间
time_t st_ctime; /* time of last status change */ // 最后一次改变时间
};
st_mode :该变量占 2 byte,共16位
(1)、掩码的使用: st_mode & 掩码
(2)、其他人权限( 0-2 bit )
(a)、S_IROTH 00004 读权限
(b)、S_IWOTH 00002 写权限 掩码:S_IRWXO
(c)、S_IXOTH 00001 执行权限
(3)、所属组权限(3-5bit)
(a)、S_IRWXG 00070 读权限
(b)、S_IRGRP 00040 写权限 掩码:S_RWXG
(c)、S_IXGRP 00010 执行权限
(4)、文件所有者权限(6-8bit)
(a)、S_IRUSR 00400 读权限
(b)、S_IWUSR 00200 写权限 掩码:S_IRWXU
(c)、S_IXUSR 00100 执行权限
(5)、文件特权位(9-11bit)
(a)、 S_ISUID 0004000 设置用户ID
(b)、 S_ISGID 0002000 设置组ID 文件特权位很少用
(c)、 S_ISVTX 0001000 设置黏住位
(6)、文件类型(12-15bit)
(a) 、S_IFSOCK 0140000 socket(套接字)
(b) 、S_IFLNK 0120000 symbolic link(符号链接--软连接)
(c) 、S_IFREG 0100000 regular file(普通文件)
(d)、 S_IFBLK 0060000 block device(块设备) 掩码:S_IFMT
(e) 、S_IFDIR 0040000 directory(目录)
(f) 、 S_IFCHR 0020000 character device(字符设备)
(g)、 S_IFIFO 0010000 FIFO(管道)
三、返回值
以上三个获取文件属性的函数 若成功,返回0;若失败,返回 -1;
四、stat、lstat、fstat之间的区别
1、fstat 函数:系统调用的是一个 ”文件描述符”,而另外两个则直接接收“文件路径”。文件描述符是我们用 open 系统调用后得到的,而文件全路径直接写就可以了。
2、stat 函数与 lstat 函数的区别: 当一个文件是符号链接时,lstat 函数返回的是该符号链接本身的信息;而 stat 函数返回的是该链接指向文件的信息。
#include<unistd.h>
#include<sys/types.h>
#include<sys/stat.h>
#include<stdio.h>
#include<stdlib.h>
int main(int argc,char *argv[])
{
if( argc<2 )
{
perror("a.out ");
exit(1);
}
struct stat st;
int ret = lstat(argv[1],&st);
if( ret == -1)
{
perror("lstat");
exit(1);
}
int size = st.st_size;
printf("file size = %d\n",size);
return 0;
}
五、使用 stat() 函数实现一个简单的 ls -l Shell 命令:
#include<unistd.h>
#include<sys/types.h>
#include<sys/stat.h>
#include<pwd.h> // 所有者信息
#include<grp.h> // 所属组信息
#include<time.h>
#include<string.h>
#include<stdlib.h>
#include<stdio.h>
int main(int argc,char *argv[])
{
if( argc<2 )
{
perror("./a.out filename\n");
exit(1);
}
struct stat st;
int i;
for( i = 1; i<argc; i++)
{
int ret = stat(argv[i],&st); // 获取文件或者目录的所有信息存储于 st 结构体中
if( ret == -1 )
{
perror("stat");
4000
exit(1);
}
// 存储文件类型和访问权限
char perms[11] = {0};
// 判断文件类型
switch( st.st_mode & S_IFMT )
{
case S_IFSOCK: // 套接字文件
perms[0] = 's';
break;
case S_IFLNK: // 软连接文件
perms[0] = 'l';
break;
case S_IFREG: // 普通文件
perms[0] = '-';
break;
case S_IFBLK: // 块设备文件
perms[0] = 'b';
break;
case S_IFDIR: // 目录文件
perms[0] = 'd';
break;
case S_IFCHR: // 字符设备文件
perms[0] = 'c';
break;
case S_IFIFO: // 管道文件
perms[0] = 'p';
break;
default:
break;
}
// 判断文件的访问权限
// 文件的所有者
perms[1] = (st.st_mode & S_IRUSR) ? 'r':'-';
perms[2] = (st.st_mode & S_IWUSR) ? 'w':'-';
perms[3] = (st.st_mode & S_IXUSR) ? 'x':'-';
// 文件的所属组
perms[4] = (st.st_mode & S_IRGRP) ? 'r':'-';
perms[5] = (st.st_mode & S_IWGRP) ? 'w':'-';
perms[6] = (st.st_mode & S_IXGRP) ? 'x':'-';
// 文件的其他用户
perms[7] = (st.st_mode & S_IROTH) ? 'r':'-';
perms[8] = (st.st_mode & S_IWOTH) ? 'w':'-';
perms[9] = (st.st_mode & S_IXOTH) ? 'x':'-';
// 硬链接计数
int nums = st.st_nlink;
// 文件所有者
char *fileuser = getpwuid(st.st_uid)->pw_name;
// 文件所属组
char *filegroup = getgrgid(st.st_gid)->gr_name;
// 文件大小
int size = (int)st.st_size;
// 文件修改时间
char *time = ctime(&st.st_mtime);
char mtime[512]="";
strncpy(mtime,time,strlen(time)-1);
// 保存输出信息格式
char buf[1024]={0};
// 把对应信息按格式输出到 buf 中
sprintf(buf,"%s %d %s %s %d %s %s",perms,nums,fileuser,filegroup,size,mtime,argv[i]);
// 打印 buf
printf("%s\n",buf);
// drwxrwxr-x 3 arrayli arrayli 4096 11月 13 23:19 day05
// -rw-r--r-- 1 arrayli arrayli 8980 11月 7 22:05 examples.desktop
}
return 0;
}
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
int stat(const char *path, struct stat *buf);
int fstat(int fd, struct stat *buf);
int lstat(const char *path, struct stat *buf);
二、参数
1、path :文件名或者目录名
2、fd : 文件描述符
3、 struct stat {
dev_t st_dev; /* ID of device containing file */ // 文件的设备编号
ino_t st_ino; /* inode number */ // 结点
mode_t st_mode; /* protection */ // 文件的类型和存取的权限
nlink_t st_nlink; /* number of hard links */ // 连到该文件的硬链接数目,新建的文件则硬连接数为 1
uid_t st_uid; /* user ID of owner */ // 用户ID
gid_t st_gid; /* group ID of owner */ // 组ID
dev_t st_rdev; /* device ID (if special file) */ // 若此文件为设备文件,则为其设备的编号
off_t st_size; /* total size, in bytes */ // 文件字节数(文件大小)
blksize_t st_blksize; /* blocksize for filesystem I/O */ // 块大小
blkcnt_t st_blocks; /* number of 512B blocks allocated */ // 块数
time_t st_atime; /* time of last access */ // 最后一次访问时间
time_t st_mtime; /* time of last modification */ // 最后一次修改时间
time_t st_ctime; /* time of last status change */ // 最后一次改变时间
};
st_mode :该变量占 2 byte,共16位
(1)、掩码的使用: st_mode & 掩码
(2)、其他人权限( 0-2 bit )
(a)、S_IROTH 00004 读权限
(b)、S_IWOTH 00002 写权限 掩码:S_IRWXO
(c)、S_IXOTH 00001 执行权限
(3)、所属组权限(3-5bit)
(a)、S_IRWXG 00070 读权限
(b)、S_IRGRP 00040 写权限 掩码:S_RWXG
(c)、S_IXGRP 00010 执行权限
(4)、文件所有者权限(6-8bit)
(a)、S_IRUSR 00400 读权限
(b)、S_IWUSR 00200 写权限 掩码:S_IRWXU
(c)、S_IXUSR 00100 执行权限
(5)、文件特权位(9-11bit)
(a)、 S_ISUID 0004000 设置用户ID
(b)、 S_ISGID 0002000 设置组ID 文件特权位很少用
(c)、 S_ISVTX 0001000 设置黏住位
(6)、文件类型(12-15bit)
(a) 、S_IFSOCK 0140000 socket(套接字)
(b) 、S_IFLNK 0120000 symbolic link(符号链接--软连接)
(c) 、S_IFREG 0100000 regular file(普通文件)
(d)、 S_IFBLK 0060000 block device(块设备) 掩码:S_IFMT
(e) 、S_IFDIR 0040000 directory(目录)
(f) 、 S_IFCHR 0020000 character device(字符设备)
(g)、 S_IFIFO 0010000 FIFO(管道)
三、返回值
以上三个获取文件属性的函数 若成功,返回0;若失败,返回 -1;
四、stat、lstat、fstat之间的区别
1、fstat 函数:系统调用的是一个 ”文件描述符”,而另外两个则直接接收“文件路径”。文件描述符是我们用 open 系统调用后得到的,而文件全路径直接写就可以了。
2、stat 函数与 lstat 函数的区别: 当一个文件是符号链接时,lstat 函数返回的是该符号链接本身的信息;而 stat 函数返回的是该链接指向文件的信息。
#include<unistd.h>
#include<sys/types.h>
#include<sys/stat.h>
#include<stdio.h>
#include<stdlib.h>
int main(int argc,char *argv[])
{
if( argc<2 )
{
perror("a.out ");
exit(1);
}
struct stat st;
int ret = lstat(argv[1],&st);
if( ret == -1)
{
perror("lstat");
exit(1);
}
int size = st.st_size;
printf("file size = %d\n",size);
return 0;
}
五、使用 stat() 函数实现一个简单的 ls -l Shell 命令:
#include<unistd.h>
#include<sys/types.h>
#include<sys/stat.h>
#include<pwd.h> // 所有者信息
#include<grp.h> // 所属组信息
#include<time.h>
#include<string.h>
#include<stdlib.h>
#include<stdio.h>
int main(int argc,char *argv[])
{
if( argc<2 )
{
perror("./a.out filename\n");
exit(1);
}
struct stat st;
int i;
for( i = 1; i<argc; i++)
{
int ret = stat(argv[i],&st); // 获取文件或者目录的所有信息存储于 st 结构体中
if( ret == -1 )
{
perror("stat");
4000
exit(1);
}
// 存储文件类型和访问权限
char perms[11] = {0};
// 判断文件类型
switch( st.st_mode & S_IFMT )
{
case S_IFSOCK: // 套接字文件
perms[0] = 's';
break;
case S_IFLNK: // 软连接文件
perms[0] = 'l';
break;
case S_IFREG: // 普通文件
perms[0] = '-';
break;
case S_IFBLK: // 块设备文件
perms[0] = 'b';
break;
case S_IFDIR: // 目录文件
perms[0] = 'd';
break;
case S_IFCHR: // 字符设备文件
perms[0] = 'c';
break;
case S_IFIFO: // 管道文件
perms[0] = 'p';
break;
default:
break;
}
// 判断文件的访问权限
// 文件的所有者
perms[1] = (st.st_mode & S_IRUSR) ? 'r':'-';
perms[2] = (st.st_mode & S_IWUSR) ? 'w':'-';
perms[3] = (st.st_mode & S_IXUSR) ? 'x':'-';
// 文件的所属组
perms[4] = (st.st_mode & S_IRGRP) ? 'r':'-';
perms[5] = (st.st_mode & S_IWGRP) ? 'w':'-';
perms[6] = (st.st_mode & S_IXGRP) ? 'x':'-';
// 文件的其他用户
perms[7] = (st.st_mode & S_IROTH) ? 'r':'-';
perms[8] = (st.st_mode & S_IWOTH) ? 'w':'-';
perms[9] = (st.st_mode & S_IXOTH) ? 'x':'-';
// 硬链接计数
int nums = st.st_nlink;
// 文件所有者
char *fileuser = getpwuid(st.st_uid)->pw_name;
// 文件所属组
char *filegroup = getgrgid(st.st_gid)->gr_name;
// 文件大小
int size = (int)st.st_size;
// 文件修改时间
char *time = ctime(&st.st_mtime);
char mtime[512]="";
strncpy(mtime,time,strlen(time)-1);
// 保存输出信息格式
char buf[1024]={0};
// 把对应信息按格式输出到 buf 中
sprintf(buf,"%s %d %s %s %d %s %s",perms,nums,fileuser,filegroup,size,mtime,argv[i]);
// 打印 buf
printf("%s\n",buf);
// drwxrwxr-x 3 arrayli arrayli 4096 11月 13 23:19 day05
// -rw-r--r-- 1 arrayli arrayli 8980 11月 7 22:05 examples.desktop
}
return 0;
}
相关文章推荐
- 获取文件属性信息之stat、fstat和lstat
- Linux 获取文件属性 函数 stat, fstat, lstat 以及 stat 结构体
- 【Linux学习笔记】获取文件属性 — stat()、fstat()、lstat()小结
- 【Linux学习笔记】获取文件属性 — stat()、fstat()、lstat()小结
- 【Linux学习笔记】获取文件属性 — stat()、fstat()、lstat()小结
- Linux获取文件属性stat()、fstat()、lstat()函数实例学习
- stat(),lstat(),fstat() 获取文件/目录的相关信息
- 获取文件信息(fstat、stat和lstat 区别)
- 获取文件属性-fstat/stat
- 获取文件的信息stat() lstat() fstat()
- 文件属性之stat(),fstat(),lstat(),chown(),fchown(),lchown()函数
- stat.h头文件,轻松获取文件属性
- UNIX - stat、fstat和lstat函数,获取文件信息结构
- 文件和目录之stat族函数<stat | fstat | lstat | fstatat>——APUE学习笔记(2)
- stat.h头文件,轻松获取文件属性(2…
- linux C复习:文件操作(stat获取文件属性)
- 文件操作之:fstat、stat和lstat 区别
- Perl基本技三:斯德艾特——File::stat->stat()函数获取文件属性信息
- unix文件和目录操作的函数stat()、fstat()、lstat()、access()、umask()函数
- 与文件管理相关的系统调用 lseek fstat stat lstat