linux进程如何捕捉信号
2017-09-29 19:11
387 查看
linux中一共有32种信号,在/usr/include/bits/signum.h 头文件中可以看到
#define SIGHUP 1 /* Hangup (POSIX). */
#define SIGINT 2 /* Interrupt (ANSI). */
#define SIGQUIT 3 /* Quit (POSIX). */
#define SIGILL 4 /* Illegal instruction (ANSI). */
#define SIGTRAP 5 /* Trace trap (POSIX). */
#define SIGABRT 6 /* Abort (ANSI). */
#define SIGIOT 6 /* IOT trap (4.2 BSD). */
#define SIGBUS 7 /* BUS error (4.2 BSD). */
#define SIGFPE 8 /* Floating-point exception (ANSI). */
#define SIGKILL 9 /* Kill, unblockable (POSIX). */
#define SIGUSR1 10 /* User-defined signal 1 (POSIX). */
#define SIGSEGV 11 /* Segmentation violation (ANSI). */
#define SIGUSR2 12 /* User-defined signal 2 (POSIX). */
#define SIGPIPE 13 /* Broken pipe (POSIX). */
#define SIGALRM 14 /* Alarm clock (POSIX). */
#define SIGTERM 15 /* Termination (ANSI). */
#define SIGSTKFLT 16 /* Stack fault. */
#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */
#define SIGCHLD 17 /* Child status has changed (POSIX). */
#define SIGCONT 18 /* Continue (POSIX). */
#define SIGSTOP 19 /* Stop, unblockable (POSIX). */
#define SIGTSTP 20 /* Keyboard stop (POSIX). */
#define SIGTTIN 21 /* Background read from tty (POSIX). */
#define SIGTTOU 22 /* Background write to tty (POSIX). */
#define SIGURG 23 /* Urgent condition on socket (4.2 BSD). */
#define SIGXCPU 24 /* CPU limit exceeded (4.2 BSD). */
#define SIGXFSZ 25 /* File size limit exceeded (4.2 BSD). */
#define SIGVTALRM 26 /* Virtual alarm clock (4.2 BSD). */
#define SIGPROF 27 /* Profiling alarm clock (4.2 BSD). */
#define SIGWINCH 28 /* Window size change (4.3 BSD, Sun). */
#define SIGPOLL SIGIO /* Pollable event occurred (System V). */
#define SIGIO 29 /* I/O now possible (4.2 BSD). */
#define SIGPWR 30 /* Power failure restart (System V). */
#define SIGSYS 31 /* Bad system call. */
#define SIGUNUSED 31
其中SIGKILL(9)与SIGSTOP(19)是不能捕获的,常用的Ctrl+C 发出的是SIGKILL信号。
子进程退出时会向父进程发出SIGCHLD(17)信号,默认情况下它是被屏蔽的。
SIGSTOP与SIGCONT用来暂停和继续目标进程。
SIGABRT,SIGALRM,SIGFPE,SIGPIPE,SIGINT,SIGHUP,SIGILL,SIGQUIT,SIGSEGV,SIGTERM,SIGUSR1
,SIGUSR2这12种信号,如果在进程中没有对其进行捕获处理的话,进程在收到它们时,会终止,当然还有不可捕获的SIGKILL。
在终端中发送信号用kill命令,格式为 kill 信号 目标进程PID,例如要杀掉1000号进程可以
KILL -9 1000 或者 KILL -kill 1000
在程序中kill函数的原型为 int kill(pid_t pid, int sig);
需要引入 <sys/types.h> 和 <signal.h>
在进程中需要等待某信号时,可以用pause()函数,前提是在pause调用前一定有对目标信号的捕获机制,这样在收到目标信号后,程序会继续运行。捕获信号最简单的是signal函数 :
typedef void (*sighandler_t)(int);
sighandler_t signal(int signum, sighandler_t handler);
看着很复杂,用着很简单,第一个参数为目标信号,第二个参数为处理方法,可以是自定义的函数,也可以是
SIG_IGN或者SIG_DFL,前者表示目标信号将被忽略,后者将其恢复默认。
#define SIGHUP 1 /* Hangup (POSIX). */
#define SIGINT 2 /* Interrupt (ANSI). */
#define SIGQUIT 3 /* Quit (POSIX). */
#define SIGILL 4 /* Illegal instruction (ANSI). */
#define SIGTRAP 5 /* Trace trap (POSIX). */
#define SIGABRT 6 /* Abort (ANSI). */
#define SIGIOT 6 /* IOT trap (4.2 BSD). */
#define SIGBUS 7 /* BUS error (4.2 BSD). */
#define SIGFPE 8 /* Floating-point exception (ANSI). */
#define SIGKILL 9 /* Kill, unblockable (POSIX). */
#define SIGUSR1 10 /* User-defined signal 1 (POSIX). */
#define SIGSEGV 11 /* Segmentation violation (ANSI). */
#define SIGUSR2 12 /* User-defined signal 2 (POSIX). */
#define SIGPIPE 13 /* Broken pipe (POSIX). */
#define SIGALRM 14 /* Alarm clock (POSIX). */
#define SIGTERM 15 /* Termination (ANSI). */
#define SIGSTKFLT 16 /* Stack fault. */
#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */
#define SIGCHLD 17 /* Child status has changed (POSIX). */
#define SIGCONT 18 /* Continue (POSIX). */
#define SIGSTOP 19 /* Stop, unblockable (POSIX). */
#define SIGTSTP 20 /* Keyboard stop (POSIX). */
#define SIGTTIN 21 /* Background read from tty (POSIX). */
#define SIGTTOU 22 /* Background write to tty (POSIX). */
#define SIGURG 23 /* Urgent condition on socket (4.2 BSD). */
#define SIGXCPU 24 /* CPU limit exceeded (4.2 BSD). */
#define SIGXFSZ 25 /* File size limit exceeded (4.2 BSD). */
#define SIGVTALRM 26 /* Virtual alarm clock (4.2 BSD). */
#define SIGPROF 27 /* Profiling alarm clock (4.2 BSD). */
#define SIGWINCH 28 /* Window size change (4.3 BSD, Sun). */
#define SIGPOLL SIGIO /* Pollable event occurred (System V). */
#define SIGIO 29 /* I/O now possible (4.2 BSD). */
#define SIGPWR 30 /* Power failure restart (System V). */
#define SIGSYS 31 /* Bad system call. */
#define SIGUNUSED 31
其中SIGKILL(9)与SIGSTOP(19)是不能捕获的,常用的Ctrl+C 发出的是SIGKILL信号。
子进程退出时会向父进程发出SIGCHLD(17)信号,默认情况下它是被屏蔽的。
SIGSTOP与SIGCONT用来暂停和继续目标进程。
SIGABRT,SIGALRM,SIGFPE,SIGPIPE,SIGINT,SIGHUP,SIGILL,SIGQUIT,SIGSEGV,SIGTERM,SIGUSR1
,SIGUSR2这12种信号,如果在进程中没有对其进行捕获处理的话,进程在收到它们时,会终止,当然还有不可捕获的SIGKILL。
在终端中发送信号用kill命令,格式为 kill 信号 目标进程PID,例如要杀掉1000号进程可以
KILL -9 1000 或者 KILL -kill 1000
在程序中kill函数的原型为 int kill(pid_t pid, int sig);
需要引入 <sys/types.h> 和 <signal.h>
在进程中需要等待某信号时,可以用pause()函数,前提是在pause调用前一定有对目标信号的捕获机制,这样在收到目标信号后,程序会继续运行。捕获信号最简单的是signal函数 :
typedef void (*sighandler_t)(int);
sighandler_t signal(int signum, sighandler_t handler);
看着很复杂,用着很简单,第一个参数为目标信号,第二个参数为处理方法,可以是自定义的函数,也可以是
SIG_IGN或者SIG_DFL,前者表示目标信号将被忽略,后者将其恢复默认。
相关文章推荐
- 信号退出【Linux学习笔记】kill及kill -9的用法及如何实现进程的优雅退出
- Linux 有问必答:如何在Perl中捕捉并处理信号
- 信号退出【Linux学习笔记】kill及kill -9的用法及如何实现进程的优雅退出
- 【原创】《Linux高级程序设计》杨宗德著 - 进程管理与程序开发 - 安装信号与捕捉信号 分类: Linux --- 应用程序设计 2014-11-08 13:00 49人阅读 评论(0) 收藏
- linux中的信号2——进程如何处理信号?
- Linux 多线程应用中如何编写安全的信号处理函数
- 《Linux0.11内核完全注释》读后小结 --- 进程调度与信号
- 如何在 Linux/Unix/Windows 中发现隐藏的进程和端口
- 如何查看linux下进程状态
- Linux如何利用终端关闭进程
- Linux下如何防止僵尸进程的出现
- linux下如何查看某个进程打开了那些文件
- Linux如何查看进程、杀死进程、启动进程等常用命令
- Linux僵尸进程产生及如何避免
- linux中如何查看进程使用了哪些core?
- Linux如何查看进程、杀死进程、启动进程等常用命令
- 如何在后台运行 Linux 命令并且将进程脱离终端
- linux如何后台运行进程
- 【VS开发】程序如何捕捉signal函数参数中指定的信号
- Linux僵尸进程产生及如何避免2