USB hub 多usb接口重映射:udev 规则
2017-08-23 18:52
295 查看
你在开发的过程中是否会出现 USB端口号会发生变化。 例如:
机器人底盘与雷达都是 ttyUSB* .其序号与接入的先后有关。 对于写好的launch每次修改对应接口是不是
很麻法,或者每次得先插入一个再插另外一个。才能保证ttyUSB0 ttyUSB1. 但是如果你重启系统,说不定还是有问题出现。。
==》 不如将端口重映射到新的固定的名字,并且设置其权限为可读。 这样不管你的先后插入,符合对应id的硬件端口自动的映射到新定义的名字。
一. 单一的USB映射说明
参见:http://blog.csdn.NET/zyh821351004/article/details/41577105
lsusb 命令查看所有usb端口信息。
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ lsusb
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd
Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 010: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 001 Device 008: ID 24ae:1100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
简单说明:
$kernel, %k:设备的内核设备名称,例如:sda、cdrom。
ID 10c4:ea60 表示usb设备的ID(这个ID由芯片制造商设置,可以唯一表示该设备)
10c4 usb_device_descriptor.idVendor
ea60 usb_device_descriptor.idProduct
ec45
依据这些信息,就可以简单的写udev规则了:rplidar.rules
sudo gedit /etc/udev/rules.d/rplidar.rules
[cpp]
view plain
copy
print?
# set the udev rule , make the device_port be fixed by rplidar
#
KERNEL=="ttyUSB*", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE:="0777", SYMLINK+="rplidar"
创建生效后重新插拔USB。
用下面的命令就可以查看对应的映射结果了。
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ ls -l /dev |grep ttyUSB
lrwxrwxrwx 1 root root 7 Apr 14 13:18 rplidar -> ttyUSB0
crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:18 ttyUSB0
yhzhao@yhzhao:~$
二. USB hub的多端口映射:
同一个hub连接设备base和laser, 将其重映射换名称到 slamtec_base_ 和 slamtec_laser_
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ lsusb
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd
Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 011: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 012: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 001 Device 008: ID 24ae:1100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
可以看到hub的信息,同时hub上连接了两个串口转USB的设备,并且两者硬件使用的是一样的, 一种是依据设备的device配合一起分别定义udev规则,同上。
Bus 001 Device 001: ID 1d6b:0002
Linux Foundation 2.0 root hub
现提供固定hub的每个端口的映射。
udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
说明参见: http://askubuntu.com/questions/49910/how-to-distinguish-between-identical-usb-to-serial-adapters
可以找到hub端口的不同:
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB1
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/ttyUSB1':
KERNEL=="ttyUSB1"
SUBSYSTEM=="usb-serial"
DRIVER=="cp210x"
ATTR{port_number}=="0"
looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0':
KERNELS=="1-2.2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="usb-serial"
DRIVER=="cp210x"
ATTR{port_number}=="0"
looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0':
KERNELS=="1-2.1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
#参考 http://askubuntu.com/questions/49910/how-to-distinguish-between-identical-usb-to-serial-adapters
#lsusb
#udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
[html]
view plain
copy
print?
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="00"
ATTRS{bInterfaceProtocol}=="00"
ATTRS{bNumEndpoints}=="02"
ATTRS{supports_autosuspend}=="1"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bInterfaceNumber}=="00"
ATTRS{interface}=="CP2102 USB to UART Bridge Controller"
KERNEL=="ttyUSB*", KERNELS=="1-2.1", MODE:="0777",SYMLINK+="slamtec_base_"
KERNEL=="ttyUSB*", KERNELS=="1-2.2", MODE:="0777",SYMLINK+="slamtec_laser_"
重新拔插。可以看到:
ls -l /dev
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ ls -l /dev|grep ttyUSB
lrwxrwxrwx 1 root root 7 Apr 14 13:45 rplidar -> ttyUSB1
lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_base_ -> ttyUSB0
lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_laser_ -> ttyUSB1
crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:45 ttyUSB0
crwxrwxrwx 1 root dialout 188, 1 Apr 14 13:45 ttyUSB1
参考:http://blog.csdn.net/zyh821351004/article/details/41577105
机器人底盘与雷达都是 ttyUSB* .其序号与接入的先后有关。 对于写好的launch每次修改对应接口是不是
很麻法,或者每次得先插入一个再插另外一个。才能保证ttyUSB0 ttyUSB1. 但是如果你重启系统,说不定还是有问题出现。。
==》 不如将端口重映射到新的固定的名字,并且设置其权限为可读。 这样不管你的先后插入,符合对应id的硬件端口自动的映射到新定义的名字。
一. 单一的USB映射说明
参见:http://blog.csdn.NET/zyh821351004/article/details/41577105
lsusb 命令查看所有usb端口信息。
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ lsusb
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd
Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 010: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 001 Device 008: ID 24ae:1100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
yhzhao@yhzhao:~$ lsusb Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 001 Device 010: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp. Bus 001 Device 008: ID 24ae:1100 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubudev的规则说明,可以参考博客说明:http://blog.csdn.net/cokewei/article/details/8281239
简单说明:
$kernel, %k:设备的内核设备名称,例如:sda、cdrom。
ID 10c4:ea60 表示usb设备的ID(这个ID由芯片制造商设置,可以唯一表示该设备)
10c4 usb_device_descriptor.idVendor
ea60 usb_device_descriptor.idProduct
ec45
依据这些信息,就可以简单的写udev规则了:rplidar.rules
sudo gedit /etc/udev/rules.d/rplidar.rules
[cpp]
view plain
copy
print?
# set the udev rule , make the device_port be fixed by rplidar
#
KERNEL=="ttyUSB*", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE:="0777", SYMLINK+="rplidar"
# set the udev rule , make the device_port be fixed by rplidar # KERNEL=="ttyUSB*", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE:="0777", SYMLINK+="rplidar"
创建生效后重新插拔USB。
用下面的命令就可以查看对应的映射结果了。
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ ls -l /dev |grep ttyUSB
lrwxrwxrwx 1 root root 7 Apr 14 13:18 rplidar -> ttyUSB0
crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:18 ttyUSB0
yhzhao@yhzhao:~$
yhzhao@yhzhao:~$ ls -l /dev |grep ttyUSB lrwxrwxrwx 1 root root 7 Apr 14 13:18 rplidar -> ttyUSB0 crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:18 ttyUSB0 yhzhao@yhzhao:~$
二. USB hub的多端口映射:
同一个hub连接设备base和laser, 将其重映射换名称到 slamtec_base_ 和 slamtec_laser_
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ lsusb
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd
Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 011: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 012: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 001 Device 008: ID 24ae:1100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
yhzhao@yhzhao:~$ lsusb Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 04f2:b48c Chicony Electronics Co., Ltd Bus 001 Device 009: ID 046d:c31c Logitech, Inc. Keyboard K120 Bus 001 Device 011: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 012: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 005: ID 0bda:5411 Realtek Semiconductor Corp. Bus 001 Device 008: ID 24ae:1100 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
可以看到hub的信息,同时hub上连接了两个串口转USB的设备,并且两者硬件使用的是一样的, 一种是依据设备的device配合一起分别定义udev规则,同上。
Bus 001 Device 001: ID 1d6b:0002
Linux Foundation 2.0 root hub
现提供固定hub的每个端口的映射。
udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
说明参见: http://askubuntu.com/questions/49910/how-to-distinguish-between-identical-usb-to-serial-adapters
可以找到hub端口的不同:
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB1
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/ttyUSB1':
KERNEL=="ttyUSB1"
SUBSYSTEM=="usb-serial"
DRIVER=="cp210x"
ATTR{port_number}=="0"
looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0':
KERNELS=="1-2.2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB1 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/ttyUSB1': KERNEL=="ttyUSB1" SUBSYSTEM=="usb-serial" DRIVER=="cp210x" ATTR{port_number}=="0" looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0': KERNELS=="1-2.2:1.0" SUBSYSTEMS=="usb" DRIVERS=="cp210x" ATTRS{bInterfaceClass}=="ff"
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="usb-serial"
DRIVER=="cp210x"
ATTR{port_number}=="0"
looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0':
KERNELS=="1-2.1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
yhzhao@yhzhao:~$ udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/ttyUSB0': KERNEL=="ttyUSB0" SUBSYSTEM=="usb-serial" DRIVER=="cp210x" ATTR{port_number}=="0" looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0': KERNELS=="1-2.1:1.0" SUBSYSTEMS=="usb" DRIVERS=="cp210x" ATTRS{bInterfaceClass}=="ff"
#参考 http://askubuntu.com/questions/49910/how-to-distinguish-between-identical-usb-to-serial-adapters
#lsusb
#udevadm info --attribute-walk --path=/sys/bus/usb-serial/devices/ttyUSB0
[html]
view plain
copy
print?
SUBSYSTEMS=="usb"
DRIVERS=="cp210x"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="00"
ATTRS{bInterfaceProtocol}=="00"
ATTRS{bNumEndpoints}=="02"
ATTRS{supports_autosuspend}=="1"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bInterfaceNumber}=="00"
ATTRS{interface}=="CP2102 USB to UART Bridge Controller"
KERNEL=="ttyUSB*", KERNELS=="1-2.1", MODE:="0777",SYMLINK+="slamtec_base_"
KERNEL=="ttyUSB*", KERNELS=="1-2.2", MODE:="0777",SYMLINK+="slamtec_laser_"
SUBSYSTEMS=="usb" DRIVERS=="cp210x" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="00" ATTRS{bInterfaceProtocol}=="00" ATTRS{bNumEndpoints}=="02" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" ATTRS{interface}=="CP2102 USB to UART Bridge Controller" KERNEL=="ttyUSB*", KERNELS=="1-2.1", MODE:="0777",SYMLINK+="slamtec_base_" KERNEL=="ttyUSB*", KERNELS=="1-2.2", MODE:="0777",SYMLINK+="slamtec_laser_"
重新拔插。可以看到:
ls -l /dev
[cpp]
view plain
copy
print?
yhzhao@yhzhao:~$ ls -l /dev|grep ttyUSB
lrwxrwxrwx 1 root root 7 Apr 14 13:45 rplidar -> ttyUSB1
lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_base_ -> ttyUSB0
lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_laser_ -> ttyUSB1
crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:45 ttyUSB0
crwxrwxrwx 1 root dialout 188, 1 Apr 14 13:45 ttyUSB1
yhzhao@yhzhao:~$ ls -l /dev|grep ttyUSB lrwxrwxrwx 1 root root 7 Apr 14 13:45 rplidar -> ttyUSB1 lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_base_ -> ttyUSB0 lrwxrwxrwx 1 root root 7 Apr 14 13:45 slamtec_laser_ -> ttyUSB1 crwxrwxrwx 1 root uucp 188, 0 Apr 14 13:45 ttyUSB0 crwxrwxrwx 1 root dialout 188, 1 Apr 14 13:45 ttyUSB1
参考:http://blog.csdn.net/zyh821351004/article/details/41577105
相关文章推荐
- USB hub 多usb接口重映射:udev 规则
- USB hub 多usb接口重映射:udev 规则
- USB hub 多usb接口重映射:udev 规则
- SpringMVC学习系列(3) 之 URL请求到Action的映射规则
- 地磅称量系统之(55) 扩展LINQ to SQL Classes将数据表映射成对象后不具有的验证规则
- web.xml中的url-pattern映射规则(/与/* )
- springmvc 路径映射规则、数据绑定
- servlet与filter的url-pattern设置方式及映射规则
- web.xml中的url-pattern映射规则
- UDEV规则介绍
- SpringMVC学习系列(3) 之 URL请求到Action的映射规则
- 初识Spring-MVC之Controller的URL的映射规则注解版
- springMVC映射规则详解
- springmvc默认忽视后缀的映射规则
- struts2中的web.xml映射规则
- Mybatis初窥:使用resultMap自定义高级映射规则
- 【原创】如何编写udev规则实现特定usb口设备创建指定的设备文件名?
- 跟我一起写udev规则(译)
- udev 规则与硬盘操作
- Hibernate联合主键映射规则和数据查询原理