CYGwin/Centos7下安装Goaccess

 

cd ..

cd root/opt

$ wgethttp://tar.goaccess.io/goaccess-1.1.1.tar.gz

$ tar -xzvf goaccess-1.1.1.tar.gz

$ cd goaccess-1.1.1/

$ ./configure --enable-geoip --enable-utf8

$ make

# make install

安装过程中，可能会出现geoip仓库找不到的情况，需要先安装仓库：

yum install geoip

yum install enable-geoip

安装完成后，要修改配置文件，配置分析Nginx日志文件的格式，路径：

C:\cygwin64\usr\local\etc 下的goaccess.conf

文件内容：

######################################

# Time Format Options (required)

######################################

#

# The hour (24-hour clock) [00,23]; leadingzeros are permitted but not required.

# The minute [00,59]; leading zeros arepermitted but not required.

# The seconds [00,60]; leading zeros arepermitted but not required.

# See `man strftime` for more details

#

# The following time format works with any ofthe

# Apache/NGINX's log formats below.

#

time-format %H:%M:%S

#

# Google Cloud Storage or

# The time in microseconds since the Unixepoch.

#

#time-format %f

# Squid native log format

#

#time-format %s

######################################

# Date Format Options (required)

######################################

#

# The date-format variable followed by aspace, specifies

# the log format date containing anycombination of regular

# characters and special format specifiers.They all begin with a

# percentage (%) sign. See `man strftime`

#

# The following date format works with any ofthe

# Apache/NGINX's log formats below.

#

date-format %d/%b/%Y

#

# AWS | Amazon CloudFront (Download Distribution)

# AWS | Elastic Load Balancing

# W3C (IIS)

#

#date-format %Y-%m-%d

#

# Google Cloud Storage or

# The time in microseconds since the Unixepoch.

#

#date-format %f

# Squid native log format

#

#date-format %s

######################################

# Log Format Options (required)

######################################

#

# The log-format variable followed by a spaceor \t for

# tab-delimited, specifies the log formatstring.

#

# NOTE: If the time/date is a timestamp inseconds or microseconds

# %x must be used instead of %d & %t torepresent the date & time.

# NCSA Combined Log Format

log-format %h %^[%d:%t %^] "%r" %s%b "%R" "%u" %^ %^ %^ %^ %T

# NCSA Combined Log Format with Virtual Host

#log-format %v:%^ %h %^[%d:%t %^]"%r" %s %b "%R" "%u"

# Common Log Format (CLF)

#log-format %h %^[%d:%t %^] "%r" %s%b

# Common Log Format (CLF) with Virtual Host

#log-format %v:%^ %h %^[%d:%t %^]"%r" %s %b

# W3C

#log-format %d %t %h %^ %^ %^ %^ %r %^ %s %b%^ %^ %u %R

# Squid native log format

#log-format %^ %^ %^ %v %^: %x.%^ %~%L %h%^/%s %b %m %U

# AWS | Amazon CloudFront (DownloadDistribution)

#log-format%d\t%t\t%^\t%b\t%h\t%m\t%^\t%r\t%s\t%R\t%u\t%^

# Google Cloud Storage

#log-format"%x","%h",%^,%^,"%m","%U","%s",%^,"%b","%D",%^,"%R","%u"

# AWS | Elastic Load Balancing

#log-format %dT%t.%^ %^ %h:%^ %^ %T %^ %^ %^%s %^ %b "%r" "%u"

# AWSS3 | Amazon Simple Storage Service (S3)

#log-format %^[%d:%t %^] %h %^"%r"%s %^ %b %^ %L %^ "%R" "%u"

# Virtualmin Log Format with Virtual Host

#log-format %h %^ %v %^[%d:%t %^]"%r" %s %b "%R" "%u"

# In addition to specifying the rawlog/date/time formats, for

# simplicity, any of the following predefinedlog format names can be

# supplied to the log/date/time-formatvariables. GoAccess  can  also

# handle  one predefined name in one variable and another predefined

# name in another variable.

#

#log-format COMBINED

#log-format VCOMBINED

#log-format COMMON

#log-format VCOMMON

#log-format W3C

#log-format SQUID

#log-format CLOUDFRONT

#log-format CLOUDSTORAGE

#log-format AWSELB

#log-format AWSS3

######################################

# UI Options

######################################

# Choose among color schemes

# 1 : Monochrome

# 2 : Green

# 3 : Monokai (if 256-colors supported)

#

#color-scheme 3

# Prompt log/date configuration window onprogram start.

#

config-dialog false

# Color highlight active panel.

#

hl-header true

# Specify a custom CSS file in the HTMLreport.

#

#html-custom-css /path/file.css

# Specify a custom JS file in the HTML report.

#

#html-custom-js /path/file.js

# Set default HTML preferences.

#

# NOTE: A valid JSON object is required.

# DO NOT USE A MULTILINE JSON OBJECT.

# The parser will only parse the value next to`html-prefs` (single line)

# It allows the ability to customize eachpanel plot. See example below.

#

#html-prefs{"theme":"bright","perPage":5,"layout":"horizontal","showTables":true,"visitors":{"plot":{"chartType":"bar"}}}

# Set HTML report page title and header.

#

#html-report-title My Awesome Web Stats

# Format JSON output using tabs and newlines.

#

json-pretty-print false

# Turn off colored output. This is the  default output on

# terminals that do not support colors.

# true : for no color output

# false : use color-scheme

#

no-color false

# Don't write column names in the terminaloutput. By default, it displays

# column names for each available metric inevery panel.

#

no-column-names false

# Disable summary metrics on the CSV output.

#

no-csv-summary false

# Disable progress metrics.

#

no-progress false

# Disable scrolling through panels on TAB.

#

no-tab-scroll false

# Do not show the last updated field displayedin the HTML generated report.

#

#no-html-last-updated true

# Enable mouse support on main dashboard.

#

with-mouse false

# Maximum number of items to show per panel.

# Note: Only the CSV and JSON outputs allow amaximum greater than the

# default value of 366.

#

#max-items 366

# Custom colors for the terminal output

# Tailor GoAccess to suit your own tastes.

#

# Color Syntax:

# DEFINITION space/tab colorFG#:colorBG#[[attributes,] PANEL]

#

# FG# = foreground color number [-1...255] (-1= default terminal color)

# BG# = background color number [-1...255] (-1= default terminal color)

#

# Optionally:

#

# It is possible to apply color attributes,such as:

# bold,underline,normal,reverse,blink.

# Multiple attributes are comma separated

#

# If desired, it is possible to apply customcolors per panel, that is, a

# metric in the REQUESTS panel can be of colorA, while the same metric in the

# BROWSERS panel can be of color B.

#

# The following is a 256 color scheme (hybridpalette)

#

#color COLOR_MTRC_HITS              color110:color-1

#color COLOR_MTRC_VISITORS          color173:color-1

#color COLOR_MTRC_DATA              color221:color-1

#color COLOR_MTRC_BW                color167:color-1

#color COLOR_MTRC_AVGTS             color143:color-1

#color COLOR_MTRC_CUMTS             color247:color-1

#color COLOR_MTRC_MAXTS             color186:color-1

#color COLOR_MTRC_PROT              color109:color-1

#color COLOR_MTRC_MTHD              color139:color-1

#color COLOR_MTRC_HITS_PERC         color186:color-1

<
4000
p>#color COLOR_MTRC_HITS_PERC_MAX     color139:color-1
#color COLOR_MTRC_HITS_PERC_MAX     color139:color-1 VISITORS

#color COLOR_MTRC_HITS_PERC_MAX     color139:color-1 OS

#color COLOR_MTRC_HITS_PERC_MAX     color139:color-1 BROWSERS

#color COLOR_MTRC_HITS_PERC_MAX     color139:color-1 VISIT_TIMES

#color COLOR_MTRC_VISITORS_PERC     color186:color-1

#color COLOR_MTRC_VISITORS_PERC_MAXcolor139:color-1

#color COLOR_PANEL_COLS             color243:color-1

#color COLOR_BARS                   color250:color-1

#color COLOR_ERROR                  color231:color167

#color COLOR_SELECTED               color7:color167

#color COLOR_PANEL_ACTIVE           color7:color237

#color COLOR_PANEL_HEADER           color250:color235

#color COLOR_PANEL_DESC             color242:color-1

#color COLOR_OVERALL_LBLS           color243:color-1

#color COLOR_OVERALL_VALS           color167:color-1

#color COLOR_OVERALL_PATH           color186:color-1

#color COLOR_ACTIVE_LABEL           color139:color235 bold underline

#color COLOR_BG                     color250:color-1

#color COLOR_DEFAULT                color243:color-1

#color COLOR_PROGRESS               color7:color110

######################################

# Server Options

######################################

# Specify IP address to bind server to.

#

#addr 0.0.0.0

# Run GoAccess as daemon (if --real-time-htmlenabled).

#

#daemonize false

# Ensure clients send the specified originheader upon the WebSocket

# handshake.

#

#origin http://example.org
# The port to which the connection is beingattempted to connect.

# By default GoAccess' WebSocket serverlistens on port 7890

# See man page or http://gwsocket.io fordetails.

#

#port 7890

# Enable real-time HTML output.

#

#real-time-html true

# Path to TLS/SSL certificate.

# Note that ssl-cert and ssl-key need to beused to enable TLS/SSL.

#

#ssl-cert /path/ssl/domain.crt

# Path to TLS/SSL private key.

# Note that ssl-cert and ssl-key need to beused to enable TLS/SSL.

#

#ssl-key /path/ssl/domain.key

# URL to which the WebSocket server responds.This is the URL supplied

# to the WebSocket constructor on the clientside.

#

# Optionally, it is possible to specify theWebSocket URI scheme, such as ws://

# or wss:// for unencrypted and encryptedconnections.

# e.g., ws-url wss://goaccess.io

#

# If GoAccess is running behind a proxy, youcould set the client side

# to connect to a different port by specifyingthe host followed by a

# colon and the port.

# e.g., ws-url goaccess.io:9999

#

# By default, it will attempt to connect tolocalhost. If GoAccess is

# running on a remote server, the host of theremote server should be

# specified here. Also, make sure it is avalid host and NOT an http

# address.

#

#ws-url goaccess.io

# Path to read named pipe (FIFO).

#

#fifo-in /tmp/wspipein.fifo

# Path to write named pipe (FIFO).

#

#fifo-in /tmp/wspipeout.fifo

######################################

# File Options

######################################

# Specify the path to the input log file. Ifset, it will take

# priority over -f from the command line.

#

#log-file /var/log/apache2/access.log

# Send all debug messages to the specifiedfile.

#

#debug-file debug.log

# Specify a custom configuration file to use.If set, it will take

# priority over the global configuration file(if any).

#

#config-file <filename>

# Log invalid requests to the specified file.

#

#invalid-requests <filename>

# Do not load the global configuration file.

#

#no-global-config false

######################################

# Parse Options

######################################

# Enable a list of user-agents by host. Forfaster parsing, do not

# enable this flag.

#

agent-list false

# Enable IP resolver on HTML|JSON|CSV output.

#

with-output-resolver false

# Exclude an IPv4 or IPv6 from being counted.

# Ranges can be included as well using a dashin between

# the IPs (start-end).

#

#exclude-ip 127.0.0.1

#exclude-ip 192.168.0.1-192.168.0.100

#exclude-ip ::1

#exclude-ip0:0:0:0:0:ffff:808:804-0:0:0:0:0:ffff:808:808

# Include HTTP request method if found. Thiswill create a

# request key containing the request method +the actual request.

#

# <yes|no> [default: yes]

#

http-method yes

# Include HTTP request protocol if found. Thiswill create a

# request key containing the request protocol+ the actual request.

#

# <yes|no> [default: yes]

#

http-protocol yes

# Write output to stdout given one of the following files and the

# corresponding extension for the outputformat:

#

# /path/file.csv  - Comma-separated values (CSV)

# /path/file.json - JSON (JavaScript ObjectNotation)

# /path/file.html - HTML

#

#output-format /path/file.html

# Ignore request's query string.

# i.e., www.google.com/page.htm?query => www.google.com/page.htm

#

# Note: Removing the query string can greatlydecrease memory

# consumption, especially on timestampedrequests.

#

no-query-string false

# Disable IP resolver on terminal output.

#

no-term-resolver false

# Treat non-standard status code 444 as 404.

#

444-as-404 false

# Add 4xx client errors to the unique visitorscount.

#

4xx-to-unique-count false

# Include static files that contain a querystring in the static files

# panel.

# e.g.,/fonts/fontawesome-webfont.woff?v=4.0.3

#

all-static-files false

# Date specificity. Possible values: `date`(default), or `hr`.

#

#date-spec hr

# Decode double-encoded values.

#

double-decode false

# Enable parsing/displaying the given panel.

#

#enable-panel VISITORS

#enable-panel REQUESTS

#enable-panel REQUESTS_STATIC

#enable-panel NOT_FOUND

#enable-panel HOSTS

#enable-panel OS

#enable-panel BROWSERS

#enable-panel VISIT_TIMES

#enable-panel VIRTUAL_HOSTS

#enable-panel REFERRERS

#enable-panel REFERRING_SITES

#enable-panel KEYPHRASES

#enable-panel STATUS_CODES

#enable-panel REMOTE_USER

#enable-panel GEO_LOCATION

# Hour specificity. Possible values: `hr`(default), or `min` (tenth

# of a minute).

#

#hour-spec min

# Ignore crawlers from being counted.

# This will ignore robots listed underbrowsers.c

# Note that it will count them towards thetotal

# number of requests, but excluded from any ofthe panels.

#

ignore-crawlers false

# Parse and display crawlers only.

# This will ignore robots listed underbrowsers.c

# Note that it will count them towards thetotal

# number of requests, but excluded from any ofthe panels.

#

crawlers-only false

# Ignore parsing and displaying the givenpanel.

#

#ignore-panel VISITORS

#ignore-panel REQUESTS

#ignore-panel REQUESTS_STATIC

#ignore-panel NOT_FOUND

#ignore-panel HOSTS

#ignore-panel OS

#ignore-panel BROWSERS

#ignore-panel VISIT_TIMES

#ignore-panel VIRTUAL_HOSTS

ignore-panel REFERRERS

#ignore-panel REFERRING_SITES

ignore-panel KEYPHRASES

#ignore-panel STATUS_CODES

#ignore-panel REMOTE_USER

#ignore-panel GEO_LOCATION

# Ignore referers from being counted.

# This supports wild cards. For instance,

# '*' matches 0 or more characters (includingspaces)

# '?' matches exactly one character

#

#ignore-referer *.domain.com

#ignore-referer ww?.domain.*

# Ignore parsing and displaying one ormultiple status code(s)

#

#ignore-status 400

#ignore-status 502

# Number of lines from the access log to testagainst the provided

# log/date/time format. By default, the parseris set to test 10

# lines. If set to 0, the parser won'ttest  any lines and will parse

# the whole access log.

#

#num-tests 10

# Parse log and exit without outputting data.

#

#process-and-exit false

# Display real OS names. e.g, Windows XP, SnowLeopard.

#

real-os true

# Sort panel on initial load.

# Sort options are separated by comma.

# Options are in the form: PANEL,METRIC,ORDER

#

# Available metrics:

# BY_HITS     - Sort by hits

# BY_VISITORS - Sort by unique visitors

# BY_DATA     - Sort by data

# BY_BW       - Sort by bandwidth

# BY_AVGTS    - Sort by average timeserved

# BY_CUMTS    - Sort by cumulativetime served

# BY_MAXTS    - Sort by maximum timeserved

# BY_PROT     - Sort by http protocol

# BY_MTHD     - Sort by http method

# Available orders:

#  ASC

#  DESC

#

#sort-panel VISITORS,BY_DATA,ASC

#sort-panel REQUESTS,BY_HITS,ASC

#sort-panel REQUESTS_STATIC,BY_HITS,ASC

#sort-panel NOT_FOUND,BY_HITS,ASC

#sort-panel HOSTS,BY_HITS,ASC

#sort-panel OS,BY_HITS,ASC

#sort-panel BROWSERS,BY_HITS,ASC

#sort-panel VISIT_TIMES,BY_DATA,DESC

#sort-panel VIRTUAL_HOSTS,BY_HITS,ASC

#sort-panel REFERRERS,BY_HITS,ASC

#sort-panel REFERRING_SITES,BY_HITS,ASC

#sort-panel KEYPHRASES,BY_HITS,ASC

#sort-panel STATUS_CODES,BY_HITS,ASC

#sort-panel REMOTE_USER,BY_HITS,ASC

#sort-panel GEO_LOCATION,BY_HITS,ASC

# Consider the following extensions as staticfiles

# The actual '.' is required and extensionsare case sensitive

# For a full list, uncomment the less commonstatic extensions below.

#

static-file .css

static-file .js

static-file .jpg

static-file .png

static-file .gif

static-file .ico

static-file .jpeg

static-file .pdf

static-file .txt

static-file .csv

static-file .zip

static-file .mp3

static-file .mp4

static-file .mpeg

static-file .mpg

static-file .exe

static-file .swf

static-file .woff

static-file .woff2

static-file .xls

static-file .xlsx

static-file .doc

static-file .docx

static-file .ppt

static-file .pptx

static-file .iso

static-file .gz

static-file .rar

static-file .svg

static-file .bmp

static-file .tar

static-file .tgz

static-file .tiff

static-file .tif

static-file .ttf

static-file .flv

#static-file .less

#static-file .ac3

#static-file .avi

#static-file .bz2

#static-file .class

#static-file .cue

#static-file .dae

#static-file .dat

#static-file .dts

#static-file .ejs

#static-file .eot

#static-file .eps

#static-file .img

#static-file .jar

#static-file .map

#static-file .mid

#static-file .midi

#static-file .mkv

#static-file .odp

#static-file .ods

#static-file .odt

#static-file .ogg

#static-file .otf

#static-file .pict

#static-file .pls

#static-file .ps

#static-file .qt

#static-file .rm

#static-file .svgz

#static-file .wav

#static-file .webp

######################################

# GeoIP Options

# Only if configured with --enable-geoip

######################################

# Standard GeoIP database for less memoryusage.

#

#std-geoip false

# Specify path to GeoIP database file. i.e.,GeoLiteCity.dat

# .dat file needs to be downloaded frommaxmind.com.

#

# For IPv4 City database:

# wget -Nhttp://geolite.maxmind.com/download/geoip/database/GeoLiteCity.dat.gz

# gunzip GeoLiteCity.dat.gz

#

# For IPv6 City database:

# wget -Nhttp://geolite.maxmind.com/download/geoip/database/GeoLiteCityv6-beta/GeoLiteCityv6.dat.gz

# gunzip GeoLiteCityv6.dat.gz

#

# For IPv6 Country database:

# wget -Nhttp://geolite.maxmind.com/download/geoip/database/GeoIPv6.dat.gz

# gunzip GeoIPv6.dat.gz

#

# Note: `geoip-city-data` is an alias of`geoip-database`

#

#geoip-database/usr/local/share/GeoIP/GeoLiteCity.dat

######################################

# Tokyo Cabinet Options

# Only if configured with --enable-tcb=btree

######################################

# GoAccess has the ability to process logsincrementally through the on-disk

# B+Tree database.

#

# It works in the following way:

# - A data set must be persisted first with--keep-db-files, then the same data

#   setcan be loaded with --load-from-disk.

# - If new data is passed (piped or through alog file), it will append it to

#   theoriginal data set.

# - To preserve the data at all times,--keep-db-files must be used.

# - If --load-from-disk is used without--keep-db-files, database files will be

#  deleted upon closing the program.

# On-disk B+ Tree

# Persist parsed data into disk. This shouldbe set to

# the first dataset prior to use`load-from-disk`.

# Setting it to false will delete all databasefiles

# when exiting the program.

#keep-db-files true

# On-disk B+ Tree

# Load previously stored data from disk.

# Database files need to exist. See`keep-db-files`.

#load-from-disk false

# On-disk B+ Tree

# Path where the on-disk database files arestored.

# The default value is the /tmp/ directory

# Note the trailing forward-slash.

#

#db-path /tmp/

# On-disk B+ Tree

# Set the size in bytes of the extra mappedmemory.

# The default value is 0.

#

#xmmap 0

# On-disk B+ Tree

# Max number of leaf nodes to be cached.

# Specifies the maximum number of leaf nodesto be cached.

# If it is not more than 0, the default valueis specified.

# The default value is 1024.

#

#cache-lcnum 1024

# On-disk B+ Tree

# Specifies the maximum number of non-leafnodes to be cached.

# If it is not more than 0, the default valueis specified.

# The default value is 512.

#

#cache-ncnum 512

# On-disk B+ Tree

# Specifies the number of members in each leafpage.

# If it is not more than 0, the default valueis specified.

# The default value is 128.

#

#tune-lmemb 128

# On-disk B+ Tree

# Specifies the number of members in eachnon-leaf page.

# If it is not more than 0, the default valueis specified.

# The default value is 256.

#

#tune-nmemb 256

# On-disk B+ Tree

# Specifies the number of elements of thebucket array.

# If it is not more than 0, the default valueis specified.

# The default value is 32749.

# Suggested size of the bucket array is aboutfrom 1 to 4

# times of the number of all pages to bestored.

#

#tune-bnum 32749

# On-disk B+ Tree

# Specifies that ea
aeb5
ch page is compressed withZLIB|BZ2 encoding.

# Disabled by default.

#

#compression zlib