[Linux]ubuntu开放server的指定端口

refs：

http://askubuntu.com/questions/293356/how-to-open-a-particular-port-in-ubuntu

Run this on the commandline; it should solve issue: sudo iptables -A INPUT -m conntrack –ctstate NEW,RELATED,ESTABLISHED -j ACCEPT

To do a specific port:

sudo iptables -A INPUT -p <tcp OR udp> <--dport OR --sport> <port> -j ACCEPT

INPUT is the chain for incoming traffic. -p is protocol (either tcp or udp –dport or –sportspecify allowing for destination or source port. -j is “jump” and its where you ACCEPT, REJECT, orDROP the packet(s)

所以，开放5600端口接收广播，结果：

sudo iptables -A INPUT -p udp -d 0/0 -s 0/0 --dport 5600 -j ACCEPT

开放8000端口接收tcp，结果：

sudo iptables -A INPUT -p tcp -d 0/0 -s 0/0 --dport  8000 -j ACCEPT

设置防火墙的规则，允许5600端口进入

sudo ufw allow  5600

sudo ufw allow  8000

查看状态：

sudo netstat -ntlup

nc 用法：

refs:

http://manpages.ubuntu.com/manpages/hardy/man1/nc_openbsd.1.html

CLIENT/SERVER MODEL

It is quite simple to build a very basic client/server model using nc.
On one console, start nc listening on a specific port for a connection.
For example:

$ nc -l 1234

nc is now listening on port 1234 for a connection.  On a second console
(or a second machine), connect to the machine and port being listened on:

$ nc 127.0.0.1 1234

开放ubuntu server的指定端口