saltstack自动化运维系列⑥SaltStack实践安装配置HAproxy的Keepalived

saltstack自动化运维系列⑥SaltStack实践安装配置HAproxy的Keepalived

安装配置Keepalived

1、编写功能模块

#创建keepalived目录
# mkdir -p /srv/salt/prod/keepalived/files
# cd /srv/salt/prod/keepalived/files

#获取并解压keepalived
# wget http://www.keepalived.org/software/keepalived-1.2.19.tar.gz # tar xf keepalived-1.2.19.tar.gz
# cd keepalived-1.2.19

#从源码包拷贝启动脚本、配置文件到files目录
# cp keepalived/etc/init.d/keepalived.init /srv/salt/prod/keepalived/files/
# cp keepalived/etc/init.d/keepalived.sysconfig /srv/salt/prod/keepalived/files/
# cp keepalived/etc/keepalived/keepalived.conf /srv/salt/prod/keepalived/files/

修改启动脚本：
vim prod/keepalived/files/keepalived.init

23 daemon /usr/local/keepalived/sbin/keepalived ${KEEPALIVED_OPTIONS}



#编写install.sls文件
# cd /srv/salt/prod/keepalived/
# vim install.sls

include:
- pkg.pkg-init
keepalived-install:
file.managed:
- name: /usr/local/src/keepalived-1.2.19.tar.gz
- source: salt://keepalived/files/keepalived-1.2.19.tar.gz
- user: root
- group: root
- mode: 755
cmd.run:
- name: cd /usr/local/src && tar xf keepalived-1.2.19.tar.gz && cd keepalived-1.2.19 && ./configure --prefix=/usr/local/keepalived --disable-fwmark && make && make install
- unless: test -d /usr/local/keepalived
- require:
- pkg: pkg-init
- file: keepalived-install
keepalived-init:
file.managed:
- name: /etc/init.d/keepalived
- source: salt://keepalived/files/keepalived.init
- user: root
- group: root
- mode: 755
cmd.run:
- name: chkconfig --add keepalived
- unless: chkconfig --list |grep keepalived
- require:
- file: keepalived-init
/etc/sysconfig/keepalived:
file.managed:
- source: salt://keepalived/files/keepalived.sysconfig
- user: root
- group: root
- mode: 644
/etc/keepalived:
file.directory:
- user: root
- group: root
- mode: 755

测试
# salt '*' state.sls keepalived.install env=prod test=True

2、编写业务模块

# cd /srv/salt/prod/cluster

#编写keepalived配置文件
# cd files/
# vim haproxy-outside-keepalived.conf

! Configuration File for keepalived
global_defs {
notification_email {
saltstack@example.com
}
notification_email_from keepalived@example.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id {{ROUTEID}} # jinja模板变量
}
vrrp_instance haproxy_ha {
state {{STATEID}} # jinja模板变量
interface eth0
virtual_router_id 36
priority {{PRIORITYID}} # jinja模板变量
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.3.11
}
}

#编写用于管理keepalived配置文件的SLS
# cd /srv/salt/prod/cluster
# vim haproxy-outside-keepalived.sls

include:
- keepalived.install
keepalived-serivce:
file.managed:
- name: /etc/keepalived/keepalived.conf
- source: salt://cluster/files/haproxy-outside-keepalived.conf
- user: root
- group: root
- mode: 644
- template: jinja
{% if grains['fqdn'] == 'mini1' %}
- ROUTEID: haproxy_ha
- STATEID: MASTER
- PRIORITYID: 150
{% elif grains['fqdn'] == 'node2.chinasoft.com' %}
- ROUTEID: haproxy_ha
- STATEID: BACKUP
- PRIORITYID: 100
{% endif %}
service.running:
- name: keepalived
- enable: True
- watch:
- file: keepalived-serivce

测试
# salt '*' state.sls cluster.haproxy-outside-keepalived env=prod test=True

#在top.sls中加入keepalived
# cd /srv/salt/base
# vim top.sls
base:
'*':
- init.env_init
prod:
'*':
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived

#执行安装和配置keepalived
# salt '*' state.highstate

查看mini1主机的IP地址，可以看到vip 192.168.3.11已经在Mini1上

# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:f3:33:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.3.12/24 brd 192.168.3.255 scope global eth0
inet 192.168.3.11/32 scope global eth0
inet6 fe80::20c:29ff:fef3:33f8/64 scope link
valid_lft forever preferred_lft forever

访问：http://192.168.3.11:8888/haproxy-status Ok

测试vip的漂移：

min1停用keepalived服务：

# /etc/init.d/keepalived stop

node2.chinasoft.com查看vip就到了node2.chinasoft.com机器上

# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:55:2e:82 brd ff:ff:ff:ff:ff:ff
inet 192.168.3.19/24 brd 192.168.3.255 scope global eth0
inet 192.168.3.11/32 scope global eth0
inet6 fe80::20c:29ff:fe55:2e82/64 scope link
valid_lft forever preferred_lft forever

重新启动mini1的keepalived服务，vip又回到了mini1上
修改haproxy配置，可以实现算法轮询等高级功能vim /srv/salt/prod/cluster/files/haproxy-outside.cfg