关于ubantu在VMWARE里安装时出现'SMBus Host Controller not enabled'
2017-04-01 14:42
316 查看
在虚拟机上运行Linux内核版本为4.7或以上的系统都在安装过程中或在启动时会因为加载intel_powerclamp驱动而导致崩溃。
解决办法:
1.在启动Ubuntu的时候按住左Shift键;
2.Ubuntu开机时将显示GRUB启动选项;
3.接下来选择Ubuntu的高级选项(Advanced options for Ubuntu);
4.然后进入Ubuntu的恢复模式(Ubuntu, with Linux 4.7.x.x-generic (recovery mode));
5.在Recovery Menu中选择root进入root shell;
6.输入如下命令:
代码:
mount -o remount,rw /
7.打开blacklist.conf
代码:
vi /etc/modprobe.d/blacklist.conf
8.在文件最后添加一行
代码:blacklist intel_powerclamp
wq保存
9.重启
代码:
reboot
解决办法:
1.在启动Ubuntu的时候按住左Shift键;
2.Ubuntu开机时将显示GRUB启动选项;
3.接下来选择Ubuntu的高级选项(Advanced options for Ubuntu);
4.然后进入Ubuntu的恢复模式(Ubuntu, with Linux 4.7.x.x-generic (recovery mode));
5.在Recovery Menu中选择root进入root shell;
6.输入如下命令:
代码:
mount -o remount,rw /
7.打开blacklist.conf
代码:
vi /etc/modprobe.d/blacklist.conf
8.在文件最后添加一行
代码:blacklist intel_powerclamp
wq保存
9.重启
代码:
reboot
相关文章推荐
- VMWARE里安装时出现'SMBus Host Controller not enabled'
- VMWARE里启动kylin16.0时出现'SMBus Host Controller not enabled'(还未进入系统)
- VMWARE里安装时出现'SMBus Host Controller not enabled'
- 虚拟机安装Ubuntu开机出现“piix4_smbus0000:00:07.3: Host SMBus controller not enabled!”解决方法。
- VMWARE里启动kylin16.0时出现'SMBus Host Controller not enabled'(还未进入系统)
- 【ubuntu】VMware启动ubuntu时出现:SMBus Host Controller not enabled
- VMware安装虚拟机Ubuntu提示piix4_smbus 0000:00:007.3: Host SMBus controller not enabled错误解决办法
- VMware虚拟机启动Ubuntu时提示piix4_smbus: Host SMBus controller not enabled错误的解决办法(转载)
- 关于VMware下安装VMware tools,安装文件没有出现问题的解决
- VMware虚拟机启动Ubuntu时提示piix4_smbus: Host SMBus controller not enabled错误的解决办法(转载)
- VMware部署ubuntu提示piix4_smbus: Host SMBus controller not enabled!
- 如何解决VMware Workstation上ubuntu出现Host SMbus controller not enabled
- Host SMBus controller not enabled的解决方法
- VMWARE里安装时出现'SMBus Host Controller not enabled'
- vmware:ubuntu piix4_smbus: Host SMBus controller not enabled
- ubuntu piix4_smbus: Host SMBus controller not enabled!解决方案
- Host SMBus controller not enabled的解决方法
- Host SMBus controller not enabled的解决方法
- Ubuntu出错笔记_Host SMBus controller not enabled!
- 关于vmware11下安装centOS6.5出现eth0 no link present问题解决方法