openwrt中br-lan,eth0,eth0.1,eth0.2
2017-03-11 23:42
483 查看
本文目录 [隐藏]
I. 网络配置
有线网配置
无线网络配置
整理和搜索
II. pppoe-wan
III. lo
IV. ra0 rai0
V. 虚拟局域网
开启虚拟局域网
划分子网
VI. eth0
VII. br-lan
openwrt的接口真是多,老高一下子都看晕了,不过仔细理一理,还是能够分辨的。
首先盗openwrt-wiki中的一张图,这张图对理解这些接口很重要!
交换机手册(Switch Documentation)
Linux 网络接口(Network Interfaces)
读完这两篇文章后貌似有所觉悟,先记下来理一理!
对照着图下面的配置应该很容易就懂了。
eth0.1 是vlan1分出的lan口。
eth0.2 是vlan分出的wan口。
br-lan = eth0.1 + rai0 + ra0,即将有线LAN口和无线网统一划分为 LAN,便于管理!
更多资料
How can I tell whether a network interface is
physical (device) or
virtual (alias)?
PandoraBox的配置网络文件...基础内容,高手忽略
标签:
Linux, router,
openwrt,
network
I. 网络配置
有线网配置
无线网络配置
整理和搜索
II. pppoe-wan
III. lo
IV. ra0 rai0
V. 虚拟局域网
开启虚拟局域网
划分子网
VI. eth0
VII. br-lan
openwrt的接口真是多,老高一下子都看晕了,不过仔细理一理,还是能够分辨的。
首先盗openwrt-wiki中的一张图,这张图对理解这些接口很重要!
I. 网络配置
有线网配置
openwrt的有线网络配置文件位于/etc/config/network,老高的配置如下:
config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'auto' config interface 'lan' option ifname 'eth0.1' option force_link '1' option type 'bridge' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '60' option macaddr '64:09:80:05:e1:bb' config interface 'wan' option ifname 'eth0.2' option _orig_ifname 'eth0.2' option _orig_bridge 'false' option proto 'pppoe' option macaddr '64:09:80:05:e1:bc' option username '11100026295' option password '380926' config interface 'wan6' option _orig_ifname '@wan' option _orig_bridge 'false' option proto '6to4' config switch option name 'mt762x' option reset '1' option enable_vlan '1' config switch_vlan option device 'mt762x' option vlan '1' option ports '0 1 2 3 5 6t' config switch_vlan option device 'mt762x' option vlan '2' option ports '4 6t'
无线网络配置
openwrt的无线网络配置文件位于/etc/config/wireless,老高的配置如下:
config wifi-device 'rai0' option type 'mt7612' option mode '14' option channel 'auto' option txpower '100' option ht '20+40+80' option country 'US' option disabled '0' config wifi-iface option device 'rai0' option network 'lan' option mode 'ap' option ssid 'BYBY_WORLD' option encryption 'psk2' option key 'xxx' config wifi-device 'ra0' option type 'rt2860v2' option mode '9' option channel 'auto' option txpower '100' option ht '40' option country 'US' option disabled '0' config wifi-iface option device 'ra0' option network 'lan' option mode 'ap' option wps 'pbc' option ssid 'HELLO_WORLD' option encryption 'psk2' option key 'xxx'
整理和搜索
乍一看老高都晕了,真么多啊!赶紧Google之,看有没有什么发现!交换机手册(Switch Documentation)
Linux 网络接口(Network Interfaces)
读完这两篇文章后貌似有所觉悟,先记下来理一理!
II. pppoe-wan
虚拟设备,他就是常见的拨号宽带上网,需要有ISP提供的用户名密码,连接后方可激此接口!III. lo
虚拟设备,自身的回环网设备。IV. ra0 rai0
这两个是成对出现,一看就知道是无线设备,它们各自对应一个SSID,分别是2.4G和5G。V. 虚拟局域网
开启虚拟局域网
对应config switch
划分子网
你可以在网络->交换机中找到!
对照着图下面的配置应该很容易就懂了。
config switch_vlan option device 'mt762x' option vlan '1' option ports '0 1 2 3 5 6t' config switch_vlan option device 'mt762x' option vlan '2' option ports '4 6t'
VI. eth0
eth0是一块物理网卡。eth0.1 eth0.2都是从此设备上虚拟出来的。eth0.1 是vlan1分出的lan口。
eth0.2 是vlan分出的wan口。
VII. br-lan
虚拟设备,用于LAN口设备桥接,可以用brctl show查看使用情况。
~ brctl show bridge name bridge id STP enabled interfaces br-lan 7fff.64098005e1bb no eth0.1 rai0 ra0
br-lan = eth0.1 + rai0 + ra0,即将有线LAN口和无线网统一划分为 LAN,便于管理!
更多资料
How can I tell whether a network interface is
physical (device) or
virtual (alias)?
PandoraBox的配置网络文件...基础内容,高手忽略
标签:
Linux, router,
openwrt,
network
相关文章推荐
- openwrt中br-lan,eth0,eth0.1,eth0.2 已经 实际网口wan,lan对应的配置
- openwrt中br-lan,eth0,eth0.1,eth0.2
- openwrt: br-lan: reveived packet on eth0 with own address as source address
- eth0 eth0:1 eth0.1 的区别
- br-lan: received packet on eth2.1 with own address as source address
- br-lan、eth0、eth1及lo
- br-lan、eth0、eth1及lo
- 0.1 + 0.2 = 0.30000000000000004怎样理解
- 0.1+0.2==0.3?
- 理解linux下的 eth0,eth1,eth2,lo 网卡配置
- Linux网卡eth0变成eth1修改方法
- Time.deltaTime 的平均值在0.1-0.2左右
- 为什么 javascript 中 0.1 + 0.2 !== 0.3 为 True
- DHCP packet received on eth0.2 which has no address
- 原来 0.1*0.2!=0.02
- 浮点数存储 0.1 0.2 实际偏大
- openwrt/LEDE打印信息: br-lan: received packet on eth0 with own address as source address
- 为什么0.1+0.2=0.30000000000000004
- TP-Link WR703N OpenWRT固件修改WAN LAN排序
- 理解linux下的 eth0,eth1,eth2,lo 网卡配置