Linux 设置IP,gate, 以及自动获取IP的方法
2017-03-08 14:08
711 查看
一、使用命令设置ubuntu的ip地址
1.修改配置文件blacklist.conf禁用IPV6:
sudo vi /etc/modprobe.d/blacklist.conf
2.在文档最后添加 blacklist ipv6,然后查看修改结果:
cat /etc/modprobe.d/blacklist.conf
3.设置IP(设置网卡eth0的IP地址和子网掩码)
sudo ifconfig eth0 192.168.2.1 netmask 255.255.255.0
4.设置网关
sudo route add default gw 192.168.2.254
5.设置DNS 修改/etc/resolv.conf,在其中加入nameserver DNS的地址1 和 nameserver DNS的地址2 完成。
6.重启网络服务(若不行,请重启ubuntu:sudo reboot):
sudo /etc/init.d/networking restart
7.查看当前IP:
ifconfig
二、直接修改系统配置文件
ubuntu的网络配置文件是:/etc/network/interfaces
打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载。
1. 以DHCP方式配置网卡
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface - use DHCP to find our address
auto eth0
iface eth0 inet dhcp
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
也可以在命令行下直接输入下面的命令来获取地址
sudo dhclient eth0
2. 为网卡配置静态IP地址
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.2.1
gateway 192.168.2.254
netmask 255.255.255.0
#network 192.168.2.0
#broadcast 192.168.2.255
将上面的ip地址等信息换成你自己就可以了.用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
3. 设定第二个IP地址(虚拟IP地址)
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
在该文件中添加如下的行:
auto eth0:1
iface eth0:1 inet static
address x.x.x.x
netmask x.x.x.x
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x
根据你的情况填上所有诸如address,netmask,network,broadcast和gateways等信息:
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
4. 设置主机名称(hostname)
使用下面的命令来查看当前主机的主机名称:
sudo /bin/hostname
使用下面的命令来设置当前主机的主机名称:
sudo /bin/hostname newname
系统启动时,它会从/etc/hostname来读取主机的名称。
5. 配置DNS
首先,你可以在/etc/hosts中加入一些主机名称和这些主机名称对应的IP地址,这是简单使用本机的静态查询。要访问DNS 服务器来进行查询,需要设置/etc/resolv.conf文件,假设DNS服务器的IP地址是192.168.2.2, 那么/etc/resolv.conf文件的内容应为:
search chotim.com
nameserver 192.168.2.2
6.手动重启网络服务:
sudo /etc/init.d/networking restart
1.修改配置文件blacklist.conf禁用IPV6:
sudo vi /etc/modprobe.d/blacklist.conf
2.在文档最后添加 blacklist ipv6,然后查看修改结果:
cat /etc/modprobe.d/blacklist.conf
3.设置IP(设置网卡eth0的IP地址和子网掩码)
sudo ifconfig eth0 192.168.2.1 netmask 255.255.255.0
4.设置网关
sudo route add default gw 192.168.2.254
5.设置DNS 修改/etc/resolv.conf,在其中加入nameserver DNS的地址1 和 nameserver DNS的地址2 完成。
6.重启网络服务(若不行,请重启ubuntu:sudo reboot):
sudo /etc/init.d/networking restart
7.查看当前IP:
ifconfig
二、直接修改系统配置文件
ubuntu的网络配置文件是:/etc/network/interfaces
打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载。
1. 以DHCP方式配置网卡
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface - use DHCP to find our address
auto eth0
iface eth0 inet dhcp
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
也可以在命令行下直接输入下面的命令来获取地址
sudo dhclient eth0
2. 为网卡配置静态IP地址
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.2.1
gateway 192.168.2.254
netmask 255.255.255.0
#network 192.168.2.0
#broadcast 192.168.2.255
将上面的ip地址等信息换成你自己就可以了.用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
3. 设定第二个IP地址(虚拟IP地址)
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
在该文件中添加如下的行:
auto eth0:1
iface eth0:1 inet static
address x.x.x.x
netmask x.x.x.x
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x
根据你的情况填上所有诸如address,netmask,network,broadcast和gateways等信息:
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
4. 设置主机名称(hostname)
使用下面的命令来查看当前主机的主机名称:
sudo /bin/hostname
使用下面的命令来设置当前主机的主机名称:
sudo /bin/hostname newname
系统启动时,它会从/etc/hostname来读取主机的名称。
5. 配置DNS
首先,你可以在/etc/hosts中加入一些主机名称和这些主机名称对应的IP地址,这是简单使用本机的静态查询。要访问DNS 服务器来进行查询,需要设置/etc/resolv.conf文件,假设DNS服务器的IP地址是192.168.2.2, 那么/etc/resolv.conf文件的内容应为:
search chotim.com
nameserver 192.168.2.2
6.手动重启网络服务:
sudo /etc/init.d/networking restart
相关文章推荐
- Linux 设置IP,gate, 以及自动获取IP的方法
- Centos网络配置(手动设置和自动获取)IP的2种方法
- linux 虚拟机下设置IP自动获取。
- [转]Centos 网络配置(手动设置和自动获取)IP的方法
- Linux系统下设置静态IP或自动获取动态IP的简单方法
- Red Hat 上网设置方法——自动获取IP
- 解析Linux下的时间函数:设置以及获取时间的方法
- 辛星浅析Linux自动获取IP设置
- Linux下设置静态IP和获取动态IP的方法
- Linux下自动获取和静态配置IP的方法
- Linux下设置静态IP和获取动态IP的方法
- 系统自动设置网络参数即自动获取IP的方法
- Linux下设置静态IP和获取动态IP的方法
- Linux下设置oracle 10g 服务以及实例自动启动方法
- Linux系统下IP以及DNS设置方法
- 【linux】centos6.9设置etc0网卡开机自动获取ip
- linux设置自动获取IP
- Linux下设置静态IP和获取动态IP的方法
- Oracle VM Virtual中CentOS自动获取IP地址设置方法
- linux 下设置ip,子网掩码以及网关的命令与使用方法