字符设备驱动程序按键驱动---中断方式

中断函数：包含#include<linux/irq.h>

request_irq(irq,handle,irqflag,name,dev_id)

{

1,分配一个irqaction结构体

2、把这个结构体放到irq_desc[irq]（action链表）中

3、设置引脚

4、使能中断

}

free_irq(irq,dev_id)

{

1、irqaciton出链

2、禁止中断

}

---------------------------------------------------------------------------------------------------------------------------------------

1、open函数里，配置中断引脚，中断方式irqflags,中断号irq(如外部中断,用于表明哪个引脚)，处理函数handle，中断名name,设备号dev_id

调用request_irq(irq,handle,irqflag,name,dev_id)

static int third_drv_open(struct inode *inode, struct file *file)
{
/* 配置GPF0,2为输入引脚 */
/* 配置GPG3,11为输入引脚 */
request_irq(IRQ_EINT0, buttons_irq, IRQT_BOTHEDGE, "S2", &pins_desc[0]);
request_irq(IRQ_EINT2, buttons_irq, IRQT_BOTHEDGE, "S3", &pins_desc[1]);
request_irq(IRQ_EINT11, buttons_irq, IRQT_BOTHEDGE, "S4", &pins_desc[2]);
request_irq(IRQ_EINT19, buttons_irq, IRQT_BOTHEDGE, "S5", &pins_desc[3]);

return 0;
}

2、在file_operation结构体添加

.release = third_drv_close,
用于关闭中断函数

int third_drv_close(struct inode *inode, struct file *file)
{
free_irq(IRQ_EINT0, &pins_desc[0]);
free_irq(IRQ_EINT2, &pins_desc[1]);
free_irq(IRQ_EINT11, &pins_desc[2]);
free_irq(IRQ_EINT19, &pins_desc[3]);
return 0;
}

--------------------------------------------------------------------------------------------------------------------------------------------------

中断处理函数Button_irq对中断发生时需要处理的事件，本次主要时对按键中断函数处理

/* 键值: 按下时, 0x01, 0x02, 0x03, 0x04 */
/* 键值: 松开时, 0x81, 0x82, 0x83, 0x84 */
static unsigned char key_val;

struct pin_desc pins_desc[4] = {
{S3C2410_GPF0, 0x01},
{S3C2410_GPF2, 0x02},
{S3C2410_GPG3, 0x03},
{S3C2410_GPG11, 0x04},
};

/*
* 确定按键值
*/
static irqreturn_t buttons_irq(int irq, void *dev_id)
{

/* 引脚描述结构体 */
struct pin_desc * pindesc = (struct pin_desc *)dev_id;
unsigned int pinval;

/* 系统函数读出引脚值 */
pinval = s3c2410_gpio_getpin(pindesc->pin);

if (pinval)
{
/* 松开 */
key_val = 0x80 | pindesc->key_val;
}
else
{
/* 按下 */
key_val = pindesc->key_val;
}

ev_press = 1; /* 表示中断发生了 */
wake_up_interruptible(&button_waitq); /* 唤醒休眠的进程 */

return IRQ_RETVAL(IRQ_HANDLED);
}

----------------------------------------------------------------------------------------------------------------------------------------------------

读函数需要处理的事件

1、判断按键发生事件 ，没有就休眠，让出CPU

2、有按键事件发生，返回按键值

/* 中断事件标志, 中断服务程序将它置1，third_drv_read将它清0 */
static volatile int ev_press = 0;

struct pin_desc{
unsigned int pin;
unsigned int key_val;
};

ssize_t third_drv_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
if (size != 1)
return -EINVAL;

/* 如果没有按键动作, 休眠 */
wait_event_interruptible(button_waitq, ev_press);

/* 如果有按键动作, 返回键值 */
copy_to_user(buf, &key_val, 1);
ev_press = 0;

return 1;
}

------------------------------------------------------------------------------------------------------------------------------------------

相关按键中断驱动代码：

third_drv.c

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/regs-gpio.h>
#include <asm/hardware.h>

static struct class *thirddrv_class;
static struct class_device    *thirddrv_class_dev;

volatile unsigned long *gpfcon;
volatile unsigned long *gpfdat;

volatile unsigned long *gpgcon;
volatile unsigned long *gpgdat;

static DECLARE_WAIT_QUEUE_HEAD(button_waitq);

/* 中断事件标志, 中断服务程序将它置1，third_drv_read将它清0 */
static volatile int ev_press = 0;

struct pin_desc{
unsigned int pin;
unsigned int key_val;
};

/* 键值: 按下时, 0x01, 0x02, 0x03, 0x04 */
/* 键值: 松开时, 0x81, 0x82, 0x83, 0x84 */
static unsigned char key_val;

struct pin_desc pins_desc[4] = {
{S3C2410_GPF0, 0x01},
{S3C2410_GPF2, 0x02},
{S3C2410_GPG3, 0x03},
{S3C2410_GPG11, 0x04},
};

/*
* 确定按键值
*/
static irqreturn_t buttons_irq(int irq, void *dev_id)
{
struct pin_desc * pindesc = (struct pin_desc *)dev_id;
unsigned int pinval;

pinval = s3c2410_gpio_getpin(pindesc->pin);

if (pinval)
{
/* 松开 */
key_val = 0x80 | pindesc->key_val;
}
else
{
/* 按下 */
key_val = pindesc->key_val;
}

ev_press = 1;                  /* 表示中断发生了 */
wake_up_interruptible(&button_waitq);   /* 唤醒休眠的进程 */

return IRQ_RETVAL(IRQ_HANDLED);
}

static int third_drv_open(struct inode *inode, struct file *file)
{
/* 配置GPF0,2为输入引脚 */
/* 配置GPG3,11为输入引脚 */
request_irq(IRQ_EINT0,  buttons_irq, IRQT_BOTHEDGE, "S2", &pins_desc[0]);
request_irq(IRQ_EINT2,  buttons_irq, IRQT_BOTHEDGE, "S3", &pins_desc[1]);
request_irq(IRQ_EINT11, buttons_irq, IRQT_BOTHEDGE, "S4", &pins_desc[2]);
request_irq(IRQ_EINT19, buttons_irq, IRQT_BOTHEDGE, "S5", &pins_desc[3]);

return 0;
}

ssize_t third_drv_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
if (size != 1)
return -EINVAL;

/* 如果没有按键动作, 休眠 */
wait_event_interruptible(button_waitq, ev_press);

/* 如果有按键动作, 返回键值 */
copy_to_user(buf, &key_val, 1);
ev_press = 0;

return 1;
}

int third_drv_close(struct inode *inode, struct file *file)
{
free_irq(IRQ_EINT0, &pins_desc[0]);
free_irq(IRQ_EINT2, &pins_desc[1]);
free_irq(IRQ_EINT11, &pins_desc[2]);
free_irq(IRQ_EINT19, &pins_desc[3]);
return 0;
}

static struct file_operations sencod_drv_fops = {
.owner   =  THIS_MODULE,    /* 这是一个宏，推向编译模块时自动创建的__this_module变量 */
.open    =  third_drv_open,
.read     =    third_drv_read,
.release =  third_drv_close,
};

int major;
static int third_drv_init(void)
{
major = register_chrdev(0, "third_drv", &sencod_drv_fops);

thirddrv_class = class_create(THIS_MODULE, "third_drv");

thirddrv_class_dev = class_device_create(thirddrv_class, NULL, MKDEV(major, 0), NULL, "buttons"); /* /dev/buttons */

gpfcon = (volatile unsigned long *)ioremap(0x56000050, 16);
gpfdat = gpfcon + 1;

gpgcon = (volatile unsigned long *)ioremap(0x56000060, 16);
gpgdat = gpgcon + 1;

return 0;
}

static void third_drv_exit(void)
{
unregister_chrdev(major, "third_drv");
class_device_unregister(thirddrv_class_dev);
class_destroy(thirddrv_class);
iounmap(gpfcon);
iounmap(gpgcon);
return 0;
}

module_init(third_drv_init);

module_exit(third_drv_exit);

MODULE_LICENSE("GPL");

Makefile

KERN_DIR = /work/system/linux-2.6.22.6

all:
make -C $(KERN_DIR) M=`pwd` modules

clean:
make -C $(KERN_DIR) M=`pwd` modules clean
rm -rf modules.order

obj-m    += third_drv.o

thirddrvtest.c

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>

/* thirddrvtest
*/
int main(int argc, char **argv)
{
int fd;
unsigned char key_val;

fd = open("/dev/buttons", O_RDWR);
if (fd < 0)
{
printf("can't open!\n");
}

while (1)
{
read(fd, &key_val, 1);
printf("key_val = 0x%x\n", key_val);
}

return 0;
}