Keepalived-1.2.9集群的安装及配置

Keepalived-1.2.9集群的安装及配置

网址：http://www.linuxidc.com/Linux/2013-11/92678.htm

说明：

一、目 的：本文实现的Linux集群是基于Keepalived-1.2.9软件实现，

二、难 点：实现虚拟IP（VIP）自动切换的同时，还要同时实现虚拟MAC地址（VMAC）的切换，即无论集群中的Host如何切换，对外访问的IP和MAC始终不变

三、适用环境：当对外路由或交换机绑定主机MAC时适用

四、说 明：若无须对外绑定MAC地址，则大可简化如下配置

1. 环境及软件：

1) 系统：Debian6 amd64

2) 内核：linux 3.2.0-0.bpo.4-amd64

3) 软件：keepalived-1.2.9

2. 配置：

MASTER设备IP： eth0: 10.10.1.200/24 eth1:192.168.61.253/21

BACKUP设备IP： eth0: 10.10.1.100/24 eth1:192.168.61.252/21

VIP： 192.168.61.248/21

3. 安装步骤：

1）升级当前Debian系统内核linux 2.6.32

a) 修改Debian源文件/etc/apt/sources.list，添加一个向后兼容的源(源地址如下)

deb http://ftp.cn.debian.org/debian-backports squeeze-backports main

b) 更新Debian源文件关联并升级系统内核至3.2.0

# aptitude update

# aptitude -t squeeze-backports install linux 3.2.0-0.bpo.4-amd64

如果编译NVDIA的官方驱动的话，还要装：

# aptitude -t squeeze-backports install linux-headers-3.2.0.bpo.4-amd64

 

2) 安装keepalived-1.2.9

a) 首先要安装keepalived所依赖的组件

# aptitude install make gcc libpopt-dev libnl-dev libcurl4-openssl-dev

 

b) 将keepalived-1.2.9.tar.gz文件拷贝到/usr/local/soft下，解压，编译并安装到/usr/local/keepalived

# mkdir /usr/local/soft

通过ftp将文件拷贝至/usr/local/soft

# cd /usr/local/soft

# tar zxvf keepalived-1.2.9.tar.gz

# cd keepalived-1.2.9

# ./configure --prefix=/usr/local/keepalived

# make && make install

 

c) 重置keepalived相关文件，以便开机自动启动

# cp /usr/local/keepalived/sbin/keepalived /usr/sbin

# mkdir /etc/sysconfig

# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig

# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/

d) 修改keepalived启动脚本

# nano /etc/init.d/keepalived

修改/etc/init.d/keepalived文件，部分片段如下（蓝色标记为注释内容，红色标记为修改内容）：

……
#. /etc/rc.d/init.d/functions
. /lib/lsb/init-functions
# Source configuration file (we set KEEPALIVED_OPTIONS there)

. /etc/sysconfig/keepalived

RETVAL=0

prog="keepalived"

start() {

echo -n $"Starting $prog: "
# keepalived ${KEEPALIVED_OPTIONS}
keepalived -D

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && touch /var/lock/$prog

}

stop() {

echo -n $"Stopping $prog: "

killproc keepalived

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && rm -f /var/lock/$prog

}

……

condrestart)

if [ -f /var/lock/$prog ]; then

stop

start

fi

;;

……

e) 网卡配置参数
修改文件/etc/sysctl.conf，添加如下内容：
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 1
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.eth0.arp_filter = 1 
f) 在/etc/keepalived下创建keepalived配置文件keepalived.conf
# mkdir /etc/keepalived
# nano /etc/keepalived/keepalived.conf
global_defs {
notification_email {
tiddy@example.com 
}
notification_email_from keepalived@example.com
smtp_server 192.168.1.5
smtp_connect_timeout 30
router_id LVS_DEVEL_11 #与backup配置不相同的任意合法字符串
}

vrrp_instance VI_1 {
state MASTER #backup机器配置为BACKUP
interface eth1 #绑定的网卡名称
virtual_router_id 250 #必须与backup机器配置相同
use_vmac #名字可为任意合法字符串(默认字符串 vrrp.${virtual_router_id} 此处默认使用vrrp.250)
priority 200 #优先级，要比backup机器高至少50
advert_int 1
authentication {
auth_type PASS #授权类型，必须与backup相同
auth_pass 1111 #授权密码，必须与backup相同
}
virtual_ipaddress {
192.168.61.249/21 #虚拟ip地址，必须与backup相同
}
notify_master /usr/local/keepalived/script/vmac_tweak.sh
}
e）创建脚本
脚本/usr/local/keepalived/script/vmac_tweak.sh
# mkdir /usr/local/keepalived/script
# touch /usr/local/keepalived/script/vmac_tweak.sh
脚本内容如下：
#!/bin/bash
echo "0" > /proc/sys/net/ipv4/conf/uvmac/arp_filter
echo "1" > /proc/sys/net/ipv4/conf/uvmac/accept_local
3) 启动keepalived
# invoke-rc.d keepalived start
4) 测试keepalived
a) MASTER启动时，查看日志/var/log/messages，显示keepalived进入MASTER状态同理，BACKUP机器将进入BACKUP状态 
b) 当MASTER机器down掉时，查看BACKUP机器日志，显示keepalived进入MASTER，当MASTER重新启动时，MASTER机器进入MASTER状态而BACKUP机器keepalived重新进入BACKUP状态，此时表示keepalived安装测试已成功！



Keepalived 的详细介绍：请点这里
Keepalived 的下载地址：请点这里

推荐阅读：

CentOS 6.3下Haproxy+Keepalived+Apache配置笔记 http://www.linuxidc.com/Linux/2013-06/85598.htm

Haproxy + KeepAlived 实现WEB群集 on CentOS 6 http://www.linuxidc.com/Linux/2012-03/55672.htm

Keepalived+Haproxy配置高可用负载均衡 http://www.linuxidc.com/Linux/2012-03/56748.htm

Haproxy+Keepalived构建高可用负载均衡 http://www.linuxidc.com/Linux/2012-03/55880.ht

m