CentOS7 执行yum 命令出错
2016-11-12 15:26
295 查看
One of the configured repositories failed (Unknown), and yum doesn't have enough cached data to continue. At this point the only safe thing yum can do is fail. There are a few ways to work "fix" this: 1. Contact the upstream for the repository and get them to fix the problem. 2. Reconfigure the baseurl/etc. for the repository, to point to a working upstream. This is most often useful if you are using a newer distribution release than is supported by the repository (and the packages for the previous distribution release still work). 3. Disable the repository, so yum won't use it by default. Yum will then just ignore the repository until you permanently enable it again or use --enablerepo for temporary usage: yum-config-manager --disable <repoid> 4. Configure the failing repository to be skipped, if it is unavailable. Note that yum will try to contact the repo. when it runs most commands, so will have to try and fail each time (and thus. yum will be be much slower). If it is a very temporary problem though, this is often a nice compromise: yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true Cannot find a valid baseurl for repo: base/7/x86_64
去修改它大致需要两步
第一步:vi /etc/resolv.conf,添加下面一行就可以了
[objc] view
plain copy
nameserver 114.114.114.114(这是国内的dns服务器系统,还是比较好用的。谷歌的可以使用8.8.8.8)
修改完后service network restart进行重启,试一下yum update命令,应该就可以了。如果还不可以,可以再进行下一步。
第二步:进入 /etc/yum.repos.d ,编辑vi CentOS-Base.repo,修改下面黄色标识的部分(只需要注释掉第一行,取消注释第二行就可以了)
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
~
"CentOS-Base.repo" 44L, 1664C
完成上面两步,再重新执行yum update等其它安装命令就可以正常运行了。
相关文章推荐
- CentOS7 执行yum 命令出错 两步解决【2017.5.18原创】
- CentOS7 执行yum 命令出错
- CentOS7 执行yum 命令出错
- centos7上执行yum group install "Virtualization Hypervisor"出错
- CentOS7 执行yum 命令出错
- CentOS7 执行yum 命令出错
- 执行yum命令时报错
- python中的commands模块,执行出错:'{' 不是内部或外部命令,也不是可运行的程序 或批处理文件。
- yum命令执行报错(python升级导致)
- 命令行小白执行第三步时出错,具体情况如下: D:\Documents and Settings\Ow...
- linux 执行 iptables 命令出错 segmentation fault (core dumped) 的解决
- pxssh远程执行命令出错处理
- linux执行scp命令出错
- RDS服务器消息:执行RDS命令时出错,状态代码404
- apt-get是debian,ubuntu发行版的包管理工具,与红帽中的yum工具非常类似。 apt-get命令一般需要root权限执行,所以一般跟着sudo命令。 例:sudo apt-get xx
- maven 执行mvn package/clean命令出错
- 执行impdp命令出错的解决办法
- linux下源码编译mysql在执行configure命令时出错
- 执行yum出错:db4 error(22) from db->close
- 使用FtpWebRequest类调用GetResponseStream()时出错:502 命令未被执行