我的vim的vimrc配置文件，保存用 - 飞在天空的鱼 - 博客频道
2016-11-06 23:58
531 查看
转载自：飞在天空的鱼 - 博客频道http://blog.csdn.net/zhengzhoudaxue2/article/details/45247733?locationNum=15&fps=1
[cpp] view
plain copy
" All system-wide defaults are set in $VIMRUNTIME/debian.vim and sourced by
" the call to :runtime you can find below. If you wish to change any of those
" settings, you should do it in this file (/etc/vim/vimrc), since debian.vim
" will be overwritten everytime an upgrade of the vim packages is performed.
" It is recommended to make changes after sourcing debian.vim since it alters
" the value of the 'compatible' option.
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Uncomment the next line to make Vim more Vi-compatible
" NOTE: debian.vim sets 'nocompatible'. Setting 'compatible' changes numerous
" options, so any other options should be set AFTER setting 'compatible'.
"set compatible
" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
syntax on
endif
" If using a dark background within the editing area and syntax highlighting
" turn on this option as well
"set background=dark
" Uncomment the following to have Vim jump to the last position when
" reopening a file
"if has("autocmd")
" au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
"endif
" Uncomment the following to have Vim load indentation rules and plugins
" according to the detected filetype.
"if has("autocmd")
" filetype plugin indent on
"endif
" The following are commented out as they cause vim to behave a lot
" differently from regular Vi. They are highly recommended though.
"set showcmd " Show (partial) command in status line.
"set showmatch " Show matching brackets.
"set ignorecase " Do case insensitive matching
"set smartcase " Do smart case matching
"set incsearch " Incremental search
"set autowrite " Automatically save before commands like :next and :make
"set hidden " Hide buffers when they are abandoned
"set mouse=a " Enable mouse usage (all modes)
" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
" =============================================================================
" << 判断操作系统是 Windows 还是 Linux 和判断是终端还是 Gvim >>
" =============================================================================
" -----------------------------------------------------------------------------
" < 判断操作系统是否是 Windows 还是 Linux >
" -----------------------------------------------------------------------------
let g:iswindows = 0
let g:islinux = 0
if(has("win32") || has("win64") || has("win95") || has("win16"))
let g:iswindows = 1
else
let g:islinux = 1
endif
" -----------------------------------------------------------------------------
" < 判断是终端还是 Gvim >
" -----------------------------------------------------------------------------
if has("gui_running")
let g:isGUI = 1
else
let g:isGUI = 0
endif
" =============================================================================
" << 以下为软件默认配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < Windows Gvim 默认配置> 做了一点修改
" -----------------------------------------------------------------------------
if (g:iswindows && g:isGUI)
source $VIMRUNTIME/vimrc_example.vim
source $VIMRUNTIME/mswin.vim
behave mswin
set diffexpr=MyDiff()
function MyDiff()
let opt = '-a --binary '
if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif
if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif
let arg1 = v:fname_in
if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif
let arg2 = v:fname_new
if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif
let arg3 = v:fname_out
if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif
let eq = ''
if $VIMRUNTIME =~ ' '
if &sh =~ '\<cmd'
let cmd = '""' . $VIMRUNTIME . '\diff"'
let eq = '"'
else
let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"'
endif
else
let cmd = $VIMRUNTIME . '\diff'
endif
silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3 . eq
endfunction
endif
" -----------------------------------------------------------------------------
" < Linux Gvim/Vim 默认配置> 做了一点修改
" -----------------------------------------------------------------------------
if g:islinux
set hlsearch "高亮搜索
set incsearch "在输入要搜索的文字时，实时匹配
" Uncomment the following to have Vim jump to the last position when
" reopening a file
if has("autocmd")
au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
endif
if g:isGUI
" Source a global configuration file if available
if filereadable("/etc/vim/gvimrc.local")
source /etc/vim/gvimrc.local
endif
else
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
syntax on
endif
set mouse=a " 在任何模式下启用鼠标
"set t_Co=256 " 在终端启用256色
set backspace=2 " 设置退格键可用
" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
endif
endif
" =============================================================================
" << 以下为用户自定义配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < Vundle 插件管理工具配置 >
" -----------------------------------------------------------------------------
" 用于更方便的管理vim插件，具体用法参考 :h vundle 帮助
" Vundle工具安装方法为在终端输入如下命令
" git clone https://github.com/gmarik/vundle.git ~/.vim/bundle/vundle
" 如果想在 windows 安装就必需先安装 "git for window"，可查阅网上资料
set nocompatible "禁用 Vi 兼容模式
filetype off "禁用文件类型侦测
if g:islinux
set rtp+=/home/hisome/.vim/bundle/vundle/
call vundle#rc()
else
set rtp+=$VIM/vimfiles/bundle/vundle/
call vundle#rc('$VIM/vimfiles/bundle/')
endif
" 使用Vundle来管理插件，这个必须要有。
Bundle 'gmarik/vundle'
" 以下为要安装或更新的插件，不同仓库都有（具体书写规范请参考帮助）
Bundle 'a.vim'
Bundle 'Align'
Bundle 'jiangmiao/auto-pairs'
Bundle 'bufexplorer.zip'
Bundle 'ccvext.vim'
Bundle 'cSyntaxAfter'
Bundle 'ctrlpvim/ctrlp.vim'
Bundle 'mattn/emmet-vim'
Bundle 'Yggdroot/indentLine'
Bundle 'vim-javacompleteex'
Bundle 'Mark--Karkat'
Bundle 'Shougo/neocomplcache.vim'
Bundle 'scrooloose/nerdcommenter'
Bundle 'scrooloose/nerdtree'
Bundle 'OmniCppComplete'
Bundle 'Lokaltog/vim-powerline'
Bundle 'repeat.vim'
Bundle 'msanders/snipmate.vim'
Bundle 'wesleyche/SrcExpl'
Bundle 'std_c.zip'
Bundle 'tpope/vim-surround'
Bundle 'scrooloose/syntastic'
Bundle 'majutsushi/tagbar'
Bundle 'taglist.vim'
Bundle 'TxtBrowser'
Bundle 'ZoomWin'
Bundle 'WinManager'
Bundle 'DoxygenToolkit.vim'
" -----------------------------------------------------------------------------
" < 编码配置 >
" -----------------------------------------------------------------------------
" 注：使用utf-8格式后，软件与程序源码、文件路径不能有中文，否则报错
set encoding=utf-8 "设置gvim内部编码，默认不更改
set fileencoding=utf-8 "设置当前文件编码，可以更改，如：gbk（同cp936）
set fileencodings=ucs-bom,utf-8,gbk,cp936,latin-1 "设置支持打开的文件的编码
" 文件格式，默认 ffs=dos,unix
set fileformat=unix "设置新（当前）文件的<EOL>格式，可以更改，如：dos（windows系统常用）
set fileformats=unix,dos,mac "给出文件的<EOL>格式类型
if (g:iswindows && g:isGUI)
"解决菜单乱码
source $VIMRUNTIME/delmenu.vim
source $VIMRUNTIME/menu.vim
"解决consle输出乱码
language messages zh_CN.utf-8
endif
" -----------------------------------------------------------------------------
" < 编写文件时的配置 >
" -----------------------------------------------------------------------------
filetype on "启用文件类型侦测
filetype plugin on "针对不同的文件类型加载对应的插件
filetype plugin indent on "启用缩进
set smartindent "启用智能对齐方式
set expandtab "将Tab键转换为空格
set tabstop=4 "设置Tab键的宽度，可以更改，如：宽度为2
set shiftwidth=4 "换行时自动缩进宽度，可更改（宽度同tabstop）
set smarttab "指定按一次backspace就删除shiftwidth宽度
"set foldenable "启用折叠
"set foldmethod=indent "indent 折叠方式
"set foldcolumn=2
"set foldlevel=3
" set foldmethod=marker "marker 折叠方式
"AutoCommand
"新建.c,.h,.sh,.java文件，自动插入文件头
autocmd BufNewFile *.[ch],*.sh,*.java exec ":call SetTitle()"
"新建文件后，自动定位到文件末尾
autocmd BufNewFile * normal G
" 常规模式下用空格键来开关光标行所在折叠（注：zR 展开所有折叠，zM 关闭所有折叠）
nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>
" 当文件在外部被修改，自动更新该文件
set autoread
" 常规模式下输入 cS 清除行尾空格
nmap cS :%s/\s\+$//g<CR>:noh<CR>
" 常规模式下输入 cM 清除行尾 ^M 符号
nmap cM :%s/\r$//g<CR>:noh<CR>
set ignorecase "搜索模式里忽略大小写
set smartcase "如果搜索模式包含大写字符，不使用 'ignorecase' 选项，只有在输入搜索模式并且打开 'ignorecase' 选项时才会使用
" set noincsearch "在输入要搜索的文字时，取消实时匹配
" Ctrl + K 插入模式下光标向上移动
imap <c-k> <Up>
" Ctrl + J 插入模式下光标向下移动
imap <c-j> <Down>
" Ctrl + H 插入模式下光标向左移动
imap <c-h> <Left>
" Ctrl + L 插入模式下光标向右移动
imap <c-l> <Right>
" 启用每行超过120列的字符提示（字体变蓝并加下划线），不启用就注释掉
"au BufWinEnter * let w:m2=matchadd('Underlined', '\%>' . 120 . 'v.\+', -1)
" -----------------------------------------------------------------------------
" < 界面配置 >
" -----------------------------------------------------------------------------
set number "显示行号
set laststatus=2 "启用状态栏信息
set cmdheight=2 "设置命令行的高度为2，默认为1
set cursorline "突出显示当前行
" set guifont=YaHei_Consolas_Hybrid:h10 "设置字体:字号（字体名称空格用下划线代替）
set nowrap "设置不自动换行
set shortmess=atI "去掉欢迎界面
" 设置 gVim 窗口初始位置及大小
if g:isGUI
" au GUIEnter * simalt ~x "窗口启动时自动最大化
winpos 100 10 "指定窗口出现的位置，坐标原点在屏幕左上角
set lines=38 columns=120 "指定窗口大小，lines为高度，columns为宽度
endif
" 设置代码配色方案
set t_Co=256
set background=dark
colorscheme molokai
"if g:isGUI
" colorscheme Tomorrow-Night-Eighties "Gvim配色方案
"else
" colorscheme Tomorrow-Night-Eighties "终端配色方案
"endif
" 显示/隐藏菜单栏、工具栏、滚动条，可用 Ctrl + F11 切换
if g:isGUI
set guioptions-=m
set guioptions-=T
set guioptions-=r
set guioptions-=L
nmap <silent> <c-F11> :if &guioptions =~# 'm' <Bar>
\set guioptions-=m <Bar>
\set guioptions-=T <Bar>
\set guioptions-=r <Bar>
\set guioptions-=L <Bar>
\else <Bar>
\set guioptions+=m <Bar>
\set guioptions+=T <Bar>
\set guioptions+=r <Bar>
\set guioptions+=L <Bar>
\endif<CR>
endif
" -----------------------------------------------------------------------------
" < 编译、连接、运行配置 (目前只配置了C、C++、Java语言)>
" -----------------------------------------------------------------------------
" F9 一键保存、编译、连接存并运行
nmap <F9> :call Run()<CR>
imap <F9> <ESC>:call Run()<CR>
" Ctrl + F9 一键保存并编译
nmap <c-F9> :call Compile()<CR>
imap <c-F9> <ESC>:call Compile()<CR>
" Ctrl + F10 一键保存并连接
nmap <c-F10> :call Link()<CR>
imap <c-F10> <ESC>:call Link()<CR>
let s:LastShellReturn_C = 0
let s:LastShellReturn_L = 0
let s:ShowWarning = 1
let s:Obj_Extension = '.o'
let s:Exe_Extension = '.exe'
let s:Class_Extension = '.class'
let s:Sou_Error = 0
let s:windows_CFlags = 'gcc\ -fexec-charset=gbk\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:linux_CFlags = 'gcc\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:windows_CPPFlags = 'g++\ -fexec-charset=gbk\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:linux_CPPFlags = 'g++\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:JavaFlags = 'javac\ %'
func! Compile()
exe ":ccl"
exe ":update"
let s:Sou_Error = 0
let s:LastShellReturn_C = 0
let Sou = expand("%:p")
let v:statusmsg = ''
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let Obj = expand("%:p:r").s:Obj_Extension
let Obj_Name = expand("%:p:t:r").s:Obj_Extension
if !filereadable(Obj) || (filereadable(Obj) && (getftime(Obj) < getftime(Sou)))
redraw!
if expand("%:e") == "c"
if g:iswindows
exe ":setlocal makeprg=".s:windows_CFlags
else
exe ":setlocal makeprg=".s:linux_CFlags
endif
echohl WarningMsg | echo " compiling..."
silent make
elseif expand("%:e") == "cpp" || expand("%:e") == "cxx"
if g:iswindows
exe ":setlocal makeprg=".s:windows_CPPFlags
else
exe ":setlocal makeprg=".s:linux_CPPFlags
endif
echohl WarningMsg | echo " compiling..."
silent make
endif
redraw!
if v:shell_error != 0
let s:LastShellReturn_C = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_C != 0
exe ":bo cope"
echohl WarningMsg | echo " compilation failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " compilation successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " compilation successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""Obj_Name"is up to date"
endif
elseif expand("%:e") == "java"
let class = expand("%:p:r").s:Class_Extension
let class_Name = expand("%:p:t:r").s:Class_Extension
if !filereadable(class) || (filereadable(class) && (getftime(class) < getftime(Sou)))
redraw!
exe ":setlocal makeprg=".s:JavaFlags
echohl WarningMsg | echo " compiling..."
silent make
redraw!
if v:shell_error != 0
let s:LastShellReturn_C = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_C != 0
exe ":bo cope"
echohl WarningMsg | echo " compilation failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " compilation successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " compilation successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""class_Name"is up to date"
endif
else
let s:Sou_Error = 1
echohl WarningMsg | echo " please choose the correct source file"
endif
exe ":setlocal makeprg=make"
endfunc
func! Link()
call Compile()
if s:Sou_Error || s:LastShellReturn_C != 0
return
endif
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let s:LastShellReturn_L = 0
let Sou = expand("%:p")
let Obj = expand("%:p:r").s:Obj_Extension
if g:iswindows
let Exe = expand("%:p:r").s:Exe_Extension
let Exe_Name = expand("%:p:t:r").s:Exe_Extension
else
let Exe = expand("%:p:r")
let Exe_Name = expand("%:p:t:r")
endif
let v:statusmsg = ''
if filereadable(Obj) && (getftime(Obj) >= getftime(Sou))
redraw!
if !executable(Exe) || (executable(Exe) && getftime(Exe) < getftime(Obj))
if expand("%:e") == "c"
setlocal makeprg=gcc\ -o\ %<\ %<.o
echohl WarningMsg | echo " linking..."
silent make
elseif expand("%:e") == "cpp" || expand("%:e") == "cxx"
setlocal makeprg=g++\ -o\ %<\ %<.o
echohl WarningMsg | echo " linking..."
silent make
endif
redraw!
if v:shell_error != 0
let s:LastShellReturn_L = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_L != 0
exe ":bo cope"
echohl WarningMsg | echo " linking failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " linking successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " linking successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""Exe_Name"is up to date"
endif
endif
setlocal makeprg=make
elseif expand("%:e") == "java"
return
endif
endfunc
func! Run()
let s:ShowWarning = 0
call Link()
let s:ShowWarning = 1
if s:Sou_Error || s:LastShellReturn_C != 0 || s:LastShellReturn_L != 0
return
endif
let Sou = expand("%:p")
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let Obj = expand("%:p:r").s:Obj_Extension
if g:iswindows
let Exe = expand("%:p:r").s:Exe_Extension
else
let Exe = expand("%:p:r")
endif
if executable(Exe) && getftime(Exe) >= getftime(Obj) && getftime(Obj) >= getftime(Sou)
redraw!
echohl WarningMsg | echo " running..."
if g:iswindows
exe ":!%<.exe"
else
if g:isGUI
exe ":!gnome-terminal -x bash -c './%<; echo; echo 请按 Enter 键继续; read'"
else
exe ":!clear; ./%<"
endif
endif
redraw!
echohl WarningMsg | echo " running finish"
endif
elseif expand("%:e") == "java"
let class = expand("%:p:r").s:Class_Extension
if getftime(class) >= getftime(Sou)
redraw!
echohl WarningMsg | echo " running..."
if g:iswindows
exe ":!java %<"
else
if g:isGUI
exe ":!gnome-terminal -x bash -c 'java %<; echo; echo 请按 Enter 键继续; read'"
else
exe ":!clear; java %<"
endif
endif
redraw!
echohl WarningMsg | echo " running finish"
endif
endif
endfunc
" -----------------------------------------------------------------------------
" < 其它配置 >
" -----------------------------------------------------------------------------
set writebackup "保存文件前建立备份，保存成功后删除该备份
set nobackup "设置无备份文件
" set noswapfile "设置无临时文件
" set vb t_vb= "关闭提示音
" -----------------------------------------------------------------------------
"定义函数SetTitle，自动插入文件头
" -----------------------------------------------------------------------------
func SetTitle()
"如果文件类型为.sh文件
if &filetype == 'sh'
call setline(1, "\#########################################################################")
call append(line("."), "\# Author: zhangbo")
call append(line(".")+1, "\# Created Time: ".strftime("%c"))
call append(line(".")+2, "\# File Name: ".expand("%"))
call append(line(".")+3, "\# Description: ")
call append(line(".")+4, "\#########################################################################")
call append(line(".")+5, "\#!/bin/bash")
call append(line(".")+6, "")
else
call setline(1, "/*************************************************************************")
call append(line("."), " Author: zhangbo")
call append(line(".")+1, " Created Time: ".strftime("%c"))
call append(line(".")+2, " File Name: ".expand("%"))
call append(line(".")+3, " Description: ")
call append(line(".")+4, " ************************************************************************/")
call append(line(".")+5, "")
endif
endfunc
" =============================================================================
" << 以下为常用插件配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < a.vim 插件配置 >
" -----------------------------------------------------------------------------
" 用于切换C/C++头文件
" :A ---切换头文件并独占整个窗口
" :AV ---切换头文件并垂直分割窗口
" :AS ---切换头文件并水平分割窗口
nnoremap <silent> <F12> : A<CR>
" -----------------------------------------------------------------------------
" < Align 插件配置 >
" -----------------------------------------------------------------------------
" 一个对齐的插件，用来——排版与对齐代码，功能强大，不过用到的机会不多
" -----------------------------------------------------------------------------
" < auto-pairs 插件配置 >
" -----------------------------------------------------------------------------
" 用于括号与引号自动补全，不过会与函数原型提示插件echofunc冲突
" 所以我就没有加入echofunc插件
" -----------------------------------------------------------------------------
" < BufExplorer 插件配置 >
" -----------------------------------------------------------------------------
" 快速轻松的在缓存中切换（相当于另一种多个文件间的切换方式）
" <Leader>be 在当前窗口显示缓存列表并打开选定文件
" <Leader>bs 水平分割窗口显示缓存列表，并在缓存列表窗口中打开选定文件
" <Leader>bv 垂直分割窗口显示缓存列表，并在缓存列表窗口中打开选定文件
" -----------------------------------------------------------------------------
" < ccvext.vim 插件配置 >
" -----------------------------------------------------------------------------
" 用于对指定文件自动生成tags与cscope文件并连接
" 如果是Windows系统, 则生成的文件在源文件所在盘符根目录的.symbs目录下(如: X:\.symbs\)
" 如果是Linux系统, 则生成的文件在~/.symbs/目录下
" 具体用法可参考www.vim.org中此插件的说明
" <Leader>sy 自动生成tags与cscope文件并连接
" <Leader>sc 连接已存在的tags与cscope文件
" -----------------------------------------------------------------------------
" < cSyntaxAfter 插件配置 >
" -----------------------------------------------------------------------------
" 高亮括号与运算符等
au! BufRead,BufNewFile,BufEnter *.{c,cpp,h,java,javascript} call CSyntaxAfter()
" -----------------------------------------------------------------------------
" < ctrlp.vim 插件配置 >
" -----------------------------------------------------------------------------
" 一个全路径模糊文件，缓冲区，最近最多使用，... 检索插件；详细帮助见 :h ctrlp
" 常规模式下输入：Ctrl + p 调用插件
" -----------------------------------------------------------------------------
" < emmet-vim（前身为Zen coding） 插件配置 >
" -----------------------------------------------------------------------------
" HTML/CSS代码快速编写神器，详细帮助见 :h emmet.txt
" -----------------------------------------------------------------------------
" < indentLine 插件配置 >
" -----------------------------------------------------------------------------
" 用于显示对齐线，与 indent_guides 在显示方式上不同，根据自己喜好选择了
" 在终端上会有屏幕刷新的问题，这个问题能解决有更好了
" 开启/关闭对齐线
nmap <leader>il :IndentLinesToggle<CR>
" 设置Gvim的对齐线样式
if g:isGUI
let g:indentLine_char = "┊"
let g:indentLine_first_char = "┊"
endif
" 设置终端对齐线颜色，如果不喜欢可以将其注释掉采用默认颜色
let g:indentLine_color_term = 239
" 设置 GUI 对齐线颜色，如果不喜欢可以将其注释掉采用默认颜色
" let g:indentLine_color_gui = '#A4E57E'
" -----------------------------------------------------------------------------
" < vim-javacompleteex（也就是 javacomplete 增强版）插件配置 >
" -----------------------------------------------------------------------------
" java 补全插件
" -----------------------------------------------------------------------------
" < Mark--Karkat（也就是 Mark） 插件配置 >
" -----------------------------------------------------------------------------
" 给不同的单词高亮，表明不同的变量时很有用，详细帮助见 :h mark.txt
" " -----------------------------------------------------------------------------
" " < MiniBufExplorer 插件配置 >
" " -----------------------------------------------------------------------------
" " 快速浏览和操作Buffer
" " 主要用于同时打开多个文件并相与切换
" " let g:miniBufExplMapWindowNavArrows = 1 "用Ctrl加方向键切换到上下左右的窗口中去
" let g:miniBufExplMapWindowNavVim = 1 "用<C-k,j,h,l>切换到上下左右的窗口中去
" let g:miniBufExplMapCTabSwitchBufs = 1 "功能增强（不过好像只有在Windows中才有用）
" " <C-Tab> 向前循环切换到每个buffer上,并在但前窗口打开
" " <C-S-Tab> 向后循环切换到每个buffer上,并在当前窗口打开
" 在不使用 MiniBufExplorer 插件时也可用<C-k,j,h,l>切换到上下左右的窗口中去
noremap <c-k> <c-w>k
noremap <c-j> <c-w>j
noremap <c-h> <c-w>h
noremap <c-l> <c-w>l
" -----------------------------------------------------------------------------
" < neocomplcache 插件配置 >
" -----------------------------------------------------------------------------
" 关键字补全、文件路径补全、tag补全等等，各种，非常好用，速度超快。
let g:neocomplcache_enable_at_startup = 1 "vim 启动时启用插件
" let g:neocomplcache_disable_auto_complete = 1 "不自动弹出补全列表
" 在弹出补全列表后用 <c-p> 或 <c-n> 进行上下选择效果比较好
" -----------------------------------------------------------------------------
" < nerdcommenter 插件配置 >
" -----------------------------------------------------------------------------
" 我主要用于C/C++代码注释(其它的也行)
" 以下为插件默认快捷键，其中的说明是以C/C++为例的，其它语言类似
" <Leader>ci 以每行一个 /* */ 注释选中行(选中区域所在行)，再输入则取消注释
" <Leader>cm 以一个 /* */ 注释选中行(选中区域所在行)，再输入则称重复注释
" <Leader>cc 以每行一个 /* */ 注释选中行或区域，再输入则称重复注释
" <Leader>cu 取消选中区域(行)的注释，选中区域(行)内至少有一个 /* */
" <Leader>ca 在/*...*/与//这两种注释方式中切换（其它语言可能不一样了）
" <Leader>cA 行尾注释
let NERDSpaceDelims = 1 "在左注释符之后，右注释符之前留有空格
" -----------------------------------------------------------------------------
" < nerdtree 插件配置 >
" -----------------------------------------------------------------------------
" 有目录村结构的文件浏览插件
" 常规模式下输入 F2 调用插件
"nmap <F2> :NERDTreeToggle<CR>
" -----------------------------------------------------------------------------
" < omnicppcomplete 插件配置 >
" -----------------------------------------------------------------------------
" 用于C/C++代码补全，这种补全主要针对命名空间、类、结构、共同体等进行补全，详细
" 说明可以参考帮助或网络教程等
" 使用前先执行如下 ctags 命令（本配置中可以直接使用 ccvext 插件来执行以下命令）
" ctags -R --c++-kinds=+p --fields=+iaS --extra=+q
" 我使用上面的参数生成标签后，对函数使用跳转时会出现多个选择
" 所以我就将--c++-kinds=+p参数给去掉了，如果大侠有什么其它解决方法希望不要保留呀
filetype plugin on
set completeopt=menu "关闭预览窗口
set nocp
set ofu=syntaxcomplete#Complete
set tags+=tags
set completeopt=menu,longest,menuone
let OmniCpp_NamespaceSearch=2
let OmniCpp_GlobalScopeSearch=1
let OmniCpp_ShowAccess=1
let OmniCpp_ShowPrototypeInAbbr=1
let OmniCpp_MayCompleteDot=1
let OmniCpp_MayCompleteArrow=1
let OmniCpp_MayCompleteScope=1
let OmniCpp_DefaultNamespaces=["std", "_GLIBCXX_STD"]
let OmniCpp_SelectFirstItem=2
let OmniCpp_DisplayMode=1
au CursorMovedI,InsertLeave * if pumvisible() == 0|silent! pclose|endif
" -----------------------------------------------------------------------------
" < powerline 插件配置 >
" -----------------------------------------------------------------------------
" 状态栏插件，更好的状态栏效果
" -----------------------------------------------------------------------------
" < repeat 插件配置 >
" -----------------------------------------------------------------------------
" 主要用"."命令来重复上次插件使用的命令
" -----------------------------------------------------------------------------
" < snipMate 插件配置 >
" -----------------------------------------------------------------------------
" 用于各种代码补全，这种补全是一种对代码中的词与代码块的缩写补全，详细用法可以参
" 考使用说明或网络教程等。不过有时候也会与 supertab 插件在补全时产生冲突，如果大
" 侠有什么其它解决方法希望不要保留呀
" -----------------------------------------------------------------------------
" < SrcExpl 插件配置 >
" -----------------------------------------------------------------------------
" 增强源代码浏览，其功能就像Windows中的"Source Insight"
"nmap <F3> :SrcExplToggle<CR> "打开/闭浏览窗口
" -----------------------------------------------------------------------------
" < std_c 插件配置 >
" -----------------------------------------------------------------------------
" 用于增强C语法高亮
" 启用 // 注视风格
let c_cpp_comments = 0
" -----------------------------------------------------------------------------
" < surround 插件配置 >
" -----------------------------------------------------------------------------
" 快速给单词/句子两边增加符号（包括html标签），缺点是不能用"."来重复命令
" 不过 repeat 插件可以解决这个问题，详细帮助见 :h surround.txt
" -----------------------------------------------------------------------------
" < Syntastic 插件配置 >
" -----------------------------------------------------------------------------
" 用于保存文件时查检语法
" -----------------------------------------------------------------------------
" < Tagbar 插件配置 >
" -----------------------------------------------------------------------------
" 相对 TagList 能更好的支持面向对象
" 常规模式下输入 tb 调用插件，如果有打开 TagList 窗口则先将其关闭
nmap tb :TlistClose<CR>:TagbarToggle<CR>
let g:tagbar_width=30 "设置窗口宽度
" let g:tagbar_left=1 "在左侧窗口中显示
" -----------------------------------------------------------------------------
" < TagList 插件配置 >
" -----------------------------------------------------------------------------
" 高效地浏览源码, 其功能就像vc中的workpace
" 那里面列出了当前文件中的所有宏,全局变量, 函数名等
" 常规模式下输入 tl 调用插件，如果有打开 Tagbar 窗口则先将其关闭
nmap tl :TagbarClose<CR>:Tlist<CR>
let Tlist_Show_One_File=1 "只显示当前文件的tags
" let Tlist_Enable_Fold_Column=0 "使taglist插件不显示左边的折叠行
let Tlist_Exit_OnlyWindow=1 "如果Taglist窗口是最后一个窗口则退出Vim
let Tlist_File_Fold_Auto_Close=1 "自动折叠
let Tlist_WinWidth=30 "设置窗口宽度
let Tlist_Use_Right_Window=1 "在右侧窗口中显示
" -----------------------------------------------------------------------------
" < txtbrowser 插件配置 >
" -----------------------------------------------------------------------------
" 用于文本文件生成标签与与语法高亮（调用TagList插件生成标签，如果可以）
au BufRead,BufNewFile *.txt setlocal ft=txt
" -----------------------------------------------------------------------------
" < ZoomWin 插件配置 >
" -----------------------------------------------------------------------------
" 用于分割窗口的最大化与还原
" 常规模式下按快捷键 <c-w>o 在最大化与还原间切换
" =============================================================================
" << 以下为常用工具配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < cscope 工具配置 >
" -----------------------------------------------------------------------------
" 用Cscope自己的话说 - "你可以把它当做是超过频的ctags"
if has("cscope")
"设定可以使用 quickfix 窗口来查看 cscope 结果
set cscopequickfix=s-,c-,d-,i-,t-,e-
"使支持用 Ctrl+] 和 Ctrl+t 快捷键在代码间跳转
set cscopetag
"如果你想反向搜索顺序设置为1
set csto=0
"在当前目录中添加任何数据库
if filereadable("cscope.out")
cs add cscope.out
"否则添加数据库环境中所指出的
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set cscopeverbose
"快捷键设置
nmap ss :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap sg :cs find g <C-R>=expand("<cword>")<CR><CR>
nmap sc :cs find c <C-R>=expand("<cword>")<CR><CR>
nmap st :cs find t <C-R>=expand("<cword>")<CR><CR>
nmap se :cs find e <C-R>=expand("<cword>")<CR><CR>
nmap sf :cs find f <C-R>=expand("<cfile>")<CR><CR>
nmap si :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap sd :cs find d <C-R>=expand("<cword>")<CR><CR>
endif
" -----------------------------------------------------------------------------
" < ctags 工具配置 >
" -----------------------------------------------------------------------------
" 对浏览代码非常的方便,可以在函数,变量之间跳转等
set tags=./tags; "向上级目录递归查找tags文件（好像只有在Windows下才有用）
" -----------------------------------------------------------------------------
"< winManager 工具配置 >
" -----------------------------------------------------------------------------
let g:AutoOpenWinManager=1
let g:winManagerWindowLayout='FileExplorer|TagList'
nmap wm :WMToggle<cr>
map <silent> <F3> :WMToggle<cr>
" -----------------------------------------------------------------------------
" < gvimfullscreen 工具配置 > 请确保已安装了工具
" -----------------------------------------------------------------------------
" 用于 Windows Gvim 全屏窗口，可用 F11 切换
" 全屏后再隐藏菜单栏、工具栏、滚动条效果更好
if (g:iswindows && g:isGUI)
nmap <F11> <Esc>:call libcallnr("gvimfullscreen.dll", "ToggleFullScreen", 0)<CR>
endif
" -----------------------------------------------------------------------------
" < vimtweak 工具配置 > 请确保以已装了工具
" -----------------------------------------------------------------------------
" 这里只用于窗口透明与置顶
" 常规模式下 Ctrl + Up（上方向键） 增加不透明度，Ctrl + Down（下方向键） 减少不透明度，<Leader>t 窗口置顶与否切换
if (g:iswindows && g:isGUI)
let g:Current_Alpha = 255
let g:Top_Most = 0
func! Alpha_add()
let g:Current_Alpha = g:Current_Alpha + 10
if g:Current_Alpha > 255
let g:Current_Alpha = 255
endif
call libcallnr("vimtweak.dll","SetAlpha",g:Current_Alpha)
endfunc
func! Alpha_sub()
let g:Current_Alpha = g:Current_Alpha - 10
if g:Current_Alpha < 155
let g:Current_Alpha = 155
endif
call libcallnr("vimtweak.dll","SetAlpha",g:Current_Alpha)
endfunc
func! Top_window()
if g:Top_Most == 0
call libcallnr("vimtweak.dll","EnableTopMost",1)
let g:Top_Most = 1
else
call libcallnr("vimtweak.dll","EnableTopMost",0)
let g:Top_Most = 0
endif
endfunc
"快捷键设置
nmap <c-up> :call Alpha_add()<CR>
nmap <c-down> :call Alpha_sub()<CR>
nmap <leader>t :call Top_window()<CR>
endif
" -----------------------------------------------------------------------------
" < 自动注释 工具配置 >
" -----------------------------------------------------------------------------
map fg : Dox<cr>
let g:DoxygenToolkit_authorName="zhangbo E-mail:zhangbo@hisome.com"
let g:DoxygenToolkit_licenseTag="My own license\<enter>"
let g:DoxygenToolkit_undocTag="DOXIGEN_SKIP_BLOCK"
let g:DoxygenToolkit_briefTag_pre = "@brief\t"
let g:DoxygenToolkit_paramTag_pre = "@param\t"
let g:DoxygenToolkit_returnTag = "@return\t"
let g:DoxygenToolkit_briefTag_funcName = "no"
let g:DoxygenToolkit_maxFunctionProtoLines = 30
" =============================================================================
" << 以下为常用自动命令配置 >>
" =============================================================================
" 自动切换目录为当前编辑文件所在目录
au BufRead,BufNewFile,BufEnter * cd %:p:h
" =============================================================================
" << 其它 >>
" =============================================================================
" 注：上面配置中的"<Leader>"在本软件中设置为"\"键（引号里的反斜杠），如<Leader>t
" 指在常规模式下按"\"键加"t"键，这里不是同时按，而是先按"\"键后按"t"键，间隔在一
" 秒内，而<Leader>cs是先按"\"键再按"c"又再按"s"键；如要修改"<leader>"键，可以把
" 下面的设置取消注释，并修改双引号中的键为你想要的，如修改为逗号键。
" let mapleader = ","
[cpp] view
plain copy
" All system-wide defaults are set in $VIMRUNTIME/debian.vim and sourced by
" the call to :runtime you can find below. If you wish to change any of those
" settings, you should do it in this file (/etc/vim/vimrc), since debian.vim
" will be overwritten everytime an upgrade of the vim packages is performed.
" It is recommended to make changes after sourcing debian.vim since it alters
" the value of the 'compatible' option.
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Uncomment the next line to make Vim more Vi-compatible
" NOTE: debian.vim sets 'nocompatible'. Setting 'compatible' changes numerous
" options, so any other options should be set AFTER setting 'compatible'.
"set compatible
" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
syntax on
endif
" If using a dark background within the editing area and syntax highlighting
" turn on this option as well
"set background=dark
" Uncomment the following to have Vim jump to the last position when
" reopening a file
"if has("autocmd")
" au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
"endif
" Uncomment the following to have Vim load indentation rules and plugins
" according to the detected filetype.
"if has("autocmd")
" filetype plugin indent on
"endif
" The following are commented out as they cause vim to behave a lot
" differently from regular Vi. They are highly recommended though.
"set showcmd " Show (partial) command in status line.
"set showmatch " Show matching brackets.
"set ignorecase " Do case insensitive matching
"set smartcase " Do smart case matching
"set incsearch " Incremental search
"set autowrite " Automatically save before commands like :next and :make
"set hidden " Hide buffers when they are abandoned
"set mouse=a " Enable mouse usage (all modes)
" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
" =============================================================================
" << 判断操作系统是 Windows 还是 Linux 和判断是终端还是 Gvim >>
" =============================================================================
" -----------------------------------------------------------------------------
" < 判断操作系统是否是 Windows 还是 Linux >
" -----------------------------------------------------------------------------
let g:iswindows = 0
let g:islinux = 0
if(has("win32") || has("win64") || has("win95") || has("win16"))
let g:iswindows = 1
else
let g:islinux = 1
endif
" -----------------------------------------------------------------------------
" < 判断是终端还是 Gvim >
" -----------------------------------------------------------------------------
if has("gui_running")
let g:isGUI = 1
else
let g:isGUI = 0
endif
" =============================================================================
" << 以下为软件默认配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < Windows Gvim 默认配置> 做了一点修改
" -----------------------------------------------------------------------------
if (g:iswindows && g:isGUI)
source $VIMRUNTIME/vimrc_example.vim
source $VIMRUNTIME/mswin.vim
behave mswin
set diffexpr=MyDiff()
function MyDiff()
let opt = '-a --binary '
if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif
if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif
let arg1 = v:fname_in
if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif
let arg2 = v:fname_new
if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif
let arg3 = v:fname_out
if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif
let eq = ''
if $VIMRUNTIME =~ ' '
if &sh =~ '\<cmd'
let cmd = '""' . $VIMRUNTIME . '\diff"'
let eq = '"'
else
let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"'
endif
else
let cmd = $VIMRUNTIME . '\diff'
endif
silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3 . eq
endfunction
endif
" -----------------------------------------------------------------------------
" < Linux Gvim/Vim 默认配置> 做了一点修改
" -----------------------------------------------------------------------------
if g:islinux
set hlsearch "高亮搜索
set incsearch "在输入要搜索的文字时，实时匹配
" Uncomment the following to have Vim jump to the last position when
" reopening a file
if has("autocmd")
au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
endif
if g:isGUI
" Source a global configuration file if available
if filereadable("/etc/vim/gvimrc.local")
source /etc/vim/gvimrc.local
endif
else
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
syntax on
endif
set mouse=a " 在任何模式下启用鼠标
"set t_Co=256 " 在终端启用256色
set backspace=2 " 设置退格键可用
" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
endif
endif
" =============================================================================
" << 以下为用户自定义配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < Vundle 插件管理工具配置 >
" -----------------------------------------------------------------------------
" 用于更方便的管理vim插件，具体用法参考 :h vundle 帮助
" Vundle工具安装方法为在终端输入如下命令
" git clone https://github.com/gmarik/vundle.git ~/.vim/bundle/vundle
" 如果想在 windows 安装就必需先安装 "git for window"，可查阅网上资料
set nocompatible "禁用 Vi 兼容模式
filetype off "禁用文件类型侦测
if g:islinux
set rtp+=/home/hisome/.vim/bundle/vundle/
call vundle#rc()
else
set rtp+=$VIM/vimfiles/bundle/vundle/
call vundle#rc('$VIM/vimfiles/bundle/')
endif
" 使用Vundle来管理插件，这个必须要有。
Bundle 'gmarik/vundle'
" 以下为要安装或更新的插件，不同仓库都有（具体书写规范请参考帮助）
Bundle 'a.vim'
Bundle 'Align'
Bundle 'jiangmiao/auto-pairs'
Bundle 'bufexplorer.zip'
Bundle 'ccvext.vim'
Bundle 'cSyntaxAfter'
Bundle 'ctrlpvim/ctrlp.vim'
Bundle 'mattn/emmet-vim'
Bundle 'Yggdroot/indentLine'
Bundle 'vim-javacompleteex'
Bundle 'Mark--Karkat'
Bundle 'Shougo/neocomplcache.vim'
Bundle 'scrooloose/nerdcommenter'
Bundle 'scrooloose/nerdtree'
Bundle 'OmniCppComplete'
Bundle 'Lokaltog/vim-powerline'
Bundle 'repeat.vim'
Bundle 'msanders/snipmate.vim'
Bundle 'wesleyche/SrcExpl'
Bundle 'std_c.zip'
Bundle 'tpope/vim-surround'
Bundle 'scrooloose/syntastic'
Bundle 'majutsushi/tagbar'
Bundle 'taglist.vim'
Bundle 'TxtBrowser'
Bundle 'ZoomWin'
Bundle 'WinManager'
Bundle 'DoxygenToolkit.vim'
" -----------------------------------------------------------------------------
" < 编码配置 >
" -----------------------------------------------------------------------------
" 注：使用utf-8格式后，软件与程序源码、文件路径不能有中文，否则报错
set encoding=utf-8 "设置gvim内部编码，默认不更改
set fileencoding=utf-8 "设置当前文件编码，可以更改，如：gbk（同cp936）
set fileencodings=ucs-bom,utf-8,gbk,cp936,latin-1 "设置支持打开的文件的编码
" 文件格式，默认 ffs=dos,unix
set fileformat=unix "设置新（当前）文件的<EOL>格式，可以更改，如：dos（windows系统常用）
set fileformats=unix,dos,mac "给出文件的<EOL>格式类型
if (g:iswindows && g:isGUI)
"解决菜单乱码
source $VIMRUNTIME/delmenu.vim
source $VIMRUNTIME/menu.vim
"解决consle输出乱码
language messages zh_CN.utf-8
endif
" -----------------------------------------------------------------------------
" < 编写文件时的配置 >
" -----------------------------------------------------------------------------
filetype on "启用文件类型侦测
filetype plugin on "针对不同的文件类型加载对应的插件
filetype plugin indent on "启用缩进
set smartindent "启用智能对齐方式
set expandtab "将Tab键转换为空格
set tabstop=4 "设置Tab键的宽度，可以更改，如：宽度为2
set shiftwidth=4 "换行时自动缩进宽度，可更改（宽度同tabstop）
set smarttab "指定按一次backspace就删除shiftwidth宽度
"set foldenable "启用折叠
"set foldmethod=indent "indent 折叠方式
"set foldcolumn=2
"set foldlevel=3
" set foldmethod=marker "marker 折叠方式
"AutoCommand
"新建.c,.h,.sh,.java文件，自动插入文件头
autocmd BufNewFile *.[ch],*.sh,*.java exec ":call SetTitle()"
"新建文件后，自动定位到文件末尾
autocmd BufNewFile * normal G
" 常规模式下用空格键来开关光标行所在折叠（注：zR 展开所有折叠，zM 关闭所有折叠）
nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>
" 当文件在外部被修改，自动更新该文件
set autoread
" 常规模式下输入 cS 清除行尾空格
nmap cS :%s/\s\+$//g<CR>:noh<CR>
" 常规模式下输入 cM 清除行尾 ^M 符号
nmap cM :%s/\r$//g<CR>:noh<CR>
set ignorecase "搜索模式里忽略大小写
set smartcase "如果搜索模式包含大写字符，不使用 'ignorecase' 选项，只有在输入搜索模式并且打开 'ignorecase' 选项时才会使用
" set noincsearch "在输入要搜索的文字时，取消实时匹配
" Ctrl + K 插入模式下光标向上移动
imap <c-k> <Up>
" Ctrl + J 插入模式下光标向下移动
imap <c-j> <Down>
" Ctrl + H 插入模式下光标向左移动
imap <c-h> <Left>
" Ctrl + L 插入模式下光标向右移动
imap <c-l> <Right>
" 启用每行超过120列的字符提示（字体变蓝并加下划线），不启用就注释掉
"au BufWinEnter * let w:m2=matchadd('Underlined', '\%>' . 120 . 'v.\+', -1)
" -----------------------------------------------------------------------------
" < 界面配置 >
" -----------------------------------------------------------------------------
set number "显示行号
set laststatus=2 "启用状态栏信息
set cmdheight=2 "设置命令行的高度为2，默认为1
set cursorline "突出显示当前行
" set guifont=YaHei_Consolas_Hybrid:h10 "设置字体:字号（字体名称空格用下划线代替）
set nowrap "设置不自动换行
set shortmess=atI "去掉欢迎界面
" 设置 gVim 窗口初始位置及大小
if g:isGUI
" au GUIEnter * simalt ~x "窗口启动时自动最大化
winpos 100 10 "指定窗口出现的位置，坐标原点在屏幕左上角
set lines=38 columns=120 "指定窗口大小，lines为高度，columns为宽度
endif
" 设置代码配色方案
set t_Co=256
set background=dark
colorscheme molokai
"if g:isGUI
" colorscheme Tomorrow-Night-Eighties "Gvim配色方案
"else
" colorscheme Tomorrow-Night-Eighties "终端配色方案
"endif
" 显示/隐藏菜单栏、工具栏、滚动条，可用 Ctrl + F11 切换
if g:isGUI
set guioptions-=m
set guioptions-=T
set guioptions-=r
set guioptions-=L
nmap <silent> <c-F11> :if &guioptions =~# 'm' <Bar>
\set guioptions-=m <Bar>
\set guioptions-=T <Bar>
\set guioptions-=r <Bar>
\set guioptions-=L <Bar>
\else <Bar>
\set guioptions+=m <Bar>
\set guioptions+=T <Bar>
\set guioptions+=r <Bar>
\set guioptions+=L <Bar>
\endif<CR>
endif
" -----------------------------------------------------------------------------
" < 编译、连接、运行配置 (目前只配置了C、C++、Java语言)>
" -----------------------------------------------------------------------------
" F9 一键保存、编译、连接存并运行
nmap <F9> :call Run()<CR>
imap <F9> <ESC>:call Run()<CR>
" Ctrl + F9 一键保存并编译
nmap <c-F9> :call Compile()<CR>
imap <c-F9> <ESC>:call Compile()<CR>
" Ctrl + F10 一键保存并连接
nmap <c-F10> :call Link()<CR>
imap <c-F10> <ESC>:call Link()<CR>
let s:LastShellReturn_C = 0
let s:LastShellReturn_L = 0
let s:ShowWarning = 1
let s:Obj_Extension = '.o'
let s:Exe_Extension = '.exe'
let s:Class_Extension = '.class'
let s:Sou_Error = 0
let s:windows_CFlags = 'gcc\ -fexec-charset=gbk\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:linux_CFlags = 'gcc\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:windows_CPPFlags = 'g++\ -fexec-charset=gbk\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:linux_CPPFlags = 'g++\ -Wall\ -g\ -O0\ -c\ %\ -o\ %<.o'
let s:JavaFlags = 'javac\ %'
func! Compile()
exe ":ccl"
exe ":update"
let s:Sou_Error = 0
let s:LastShellReturn_C = 0
let Sou = expand("%:p")
let v:statusmsg = ''
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let Obj = expand("%:p:r").s:Obj_Extension
let Obj_Name = expand("%:p:t:r").s:Obj_Extension
if !filereadable(Obj) || (filereadable(Obj) && (getftime(Obj) < getftime(Sou)))
redraw!
if expand("%:e") == "c"
if g:iswindows
exe ":setlocal makeprg=".s:windows_CFlags
else
exe ":setlocal makeprg=".s:linux_CFlags
endif
echohl WarningMsg | echo " compiling..."
silent make
elseif expand("%:e") == "cpp" || expand("%:e") == "cxx"
if g:iswindows
exe ":setlocal makeprg=".s:windows_CPPFlags
else
exe ":setlocal makeprg=".s:linux_CPPFlags
endif
echohl WarningMsg | echo " compiling..."
silent make
endif
redraw!
if v:shell_error != 0
let s:LastShellReturn_C = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_C != 0
exe ":bo cope"
echohl WarningMsg | echo " compilation failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " compilation successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " compilation successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""Obj_Name"is up to date"
endif
elseif expand("%:e") == "java"
let class = expand("%:p:r").s:Class_Extension
let class_Name = expand("%:p:t:r").s:Class_Extension
if !filereadable(class) || (filereadable(class) && (getftime(class) < getftime(Sou)))
redraw!
exe ":setlocal makeprg=".s:JavaFlags
echohl WarningMsg | echo " compiling..."
silent make
redraw!
if v:shell_error != 0
let s:LastShellReturn_C = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_C != 0
exe ":bo cope"
echohl WarningMsg | echo " compilation failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " compilation successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " compilation successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""class_Name"is up to date"
endif
else
let s:Sou_Error = 1
echohl WarningMsg | echo " please choose the correct source file"
endif
exe ":setlocal makeprg=make"
endfunc
func! Link()
call Compile()
if s:Sou_Error || s:LastShellReturn_C != 0
return
endif
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let s:LastShellReturn_L = 0
let Sou = expand("%:p")
let Obj = expand("%:p:r").s:Obj_Extension
if g:iswindows
let Exe = expand("%:p:r").s:Exe_Extension
let Exe_Name = expand("%:p:t:r").s:Exe_Extension
else
let Exe = expand("%:p:r")
let Exe_Name = expand("%:p:t:r")
endif
let v:statusmsg = ''
if filereadable(Obj) && (getftime(Obj) >= getftime(Sou))
redraw!
if !executable(Exe) || (executable(Exe) && getftime(Exe) < getftime(Obj))
if expand("%:e") == "c"
setlocal makeprg=gcc\ -o\ %<\ %<.o
echohl WarningMsg | echo " linking..."
silent make
elseif expand("%:e") == "cpp" || expand("%:e") == "cxx"
setlocal makeprg=g++\ -o\ %<\ %<.o
echohl WarningMsg | echo " linking..."
silent make
endif
redraw!
if v:shell_error != 0
let s:LastShellReturn_L = v:shell_error
endif
if g:iswindows
if s:LastShellReturn_L != 0
exe ":bo cope"
echohl WarningMsg | echo " linking failed"
else
if s:ShowWarning
exe ":bo cw"
endif
echohl WarningMsg | echo " linking successful"
endif
else
if empty(v:statusmsg)
echohl WarningMsg | echo " linking successful"
else
exe ":bo cope"
endif
endif
else
echohl WarningMsg | echo ""Exe_Name"is up to date"
endif
endif
setlocal makeprg=make
elseif expand("%:e") == "java"
return
endif
endfunc
func! Run()
let s:ShowWarning = 0
call Link()
let s:ShowWarning = 1
if s:Sou_Error || s:LastShellReturn_C != 0 || s:LastShellReturn_L != 0
return
endif
let Sou = expand("%:p")
if expand("%:e") == "c" || expand("%:e") == "cpp" || expand("%:e") == "cxx"
let Obj = expand("%:p:r").s:Obj_Extension
if g:iswindows
let Exe = expand("%:p:r").s:Exe_Extension
else
let Exe = expand("%:p:r")
endif
if executable(Exe) && getftime(Exe) >= getftime(Obj) && getftime(Obj) >= getftime(Sou)
redraw!
echohl WarningMsg | echo " running..."
if g:iswindows
exe ":!%<.exe"
else
if g:isGUI
exe ":!gnome-terminal -x bash -c './%<; echo; echo 请按 Enter 键继续; read'"
else
exe ":!clear; ./%<"
endif
endif
redraw!
echohl WarningMsg | echo " running finish"
endif
elseif expand("%:e") == "java"
let class = expand("%:p:r").s:Class_Extension
if getftime(class) >= getftime(Sou)
redraw!
echohl WarningMsg | echo " running..."
if g:iswindows
exe ":!java %<"
else
if g:isGUI
exe ":!gnome-terminal -x bash -c 'java %<; echo; echo 请按 Enter 键继续; read'"
else
exe ":!clear; java %<"
endif
endif
redraw!
echohl WarningMsg | echo " running finish"
endif
endif
endfunc
" -----------------------------------------------------------------------------
" < 其它配置 >
" -----------------------------------------------------------------------------
set writebackup "保存文件前建立备份，保存成功后删除该备份
set nobackup "设置无备份文件
" set noswapfile "设置无临时文件
" set vb t_vb= "关闭提示音
" -----------------------------------------------------------------------------
"定义函数SetTitle，自动插入文件头
" -----------------------------------------------------------------------------
func SetTitle()
"如果文件类型为.sh文件
if &filetype == 'sh'
call setline(1, "\#########################################################################")
call append(line("."), "\# Author: zhangbo")
call append(line(".")+1, "\# Created Time: ".strftime("%c"))
call append(line(".")+2, "\# File Name: ".expand("%"))
call append(line(".")+3, "\# Description: ")
call append(line(".")+4, "\#########################################################################")
call append(line(".")+5, "\#!/bin/bash")
call append(line(".")+6, "")
else
call setline(1, "/*************************************************************************")
call append(line("."), " Author: zhangbo")
call append(line(".")+1, " Created Time: ".strftime("%c"))
call append(line(".")+2, " File Name: ".expand("%"))
call append(line(".")+3, " Description: ")
call append(line(".")+4, " ************************************************************************/")
call append(line(".")+5, "")
endif
endfunc
" =============================================================================
" << 以下为常用插件配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < a.vim 插件配置 >
" -----------------------------------------------------------------------------
" 用于切换C/C++头文件
" :A ---切换头文件并独占整个窗口
" :AV ---切换头文件并垂直分割窗口
" :AS ---切换头文件并水平分割窗口
nnoremap <silent> <F12> : A<CR>
" -----------------------------------------------------------------------------
" < Align 插件配置 >
" -----------------------------------------------------------------------------
" 一个对齐的插件，用来——排版与对齐代码，功能强大，不过用到的机会不多
" -----------------------------------------------------------------------------
" < auto-pairs 插件配置 >
" -----------------------------------------------------------------------------
" 用于括号与引号自动补全，不过会与函数原型提示插件echofunc冲突
" 所以我就没有加入echofunc插件
" -----------------------------------------------------------------------------
" < BufExplorer 插件配置 >
" -----------------------------------------------------------------------------
" 快速轻松的在缓存中切换（相当于另一种多个文件间的切换方式）
" <Leader>be 在当前窗口显示缓存列表并打开选定文件
" <Leader>bs 水平分割窗口显示缓存列表，并在缓存列表窗口中打开选定文件
" <Leader>bv 垂直分割窗口显示缓存列表，并在缓存列表窗口中打开选定文件
" -----------------------------------------------------------------------------
" < ccvext.vim 插件配置 >
" -----------------------------------------------------------------------------
" 用于对指定文件自动生成tags与cscope文件并连接
" 如果是Windows系统, 则生成的文件在源文件所在盘符根目录的.symbs目录下(如: X:\.symbs\)
" 如果是Linux系统, 则生成的文件在~/.symbs/目录下
" 具体用法可参考www.vim.org中此插件的说明
" <Leader>sy 自动生成tags与cscope文件并连接
" <Leader>sc 连接已存在的tags与cscope文件
" -----------------------------------------------------------------------------
" < cSyntaxAfter 插件配置 >
" -----------------------------------------------------------------------------
" 高亮括号与运算符等
au! BufRead,BufNewFile,BufEnter *.{c,cpp,h,java,javascript} call CSyntaxAfter()
" -----------------------------------------------------------------------------
" < ctrlp.vim 插件配置 >
" -----------------------------------------------------------------------------
" 一个全路径模糊文件，缓冲区，最近最多使用，... 检索插件；详细帮助见 :h ctrlp
" 常规模式下输入：Ctrl + p 调用插件
" -----------------------------------------------------------------------------
" < emmet-vim（前身为Zen coding） 插件配置 >
" -----------------------------------------------------------------------------
" HTML/CSS代码快速编写神器，详细帮助见 :h emmet.txt
" -----------------------------------------------------------------------------
" < indentLine 插件配置 >
" -----------------------------------------------------------------------------
" 用于显示对齐线，与 indent_guides 在显示方式上不同，根据自己喜好选择了
" 在终端上会有屏幕刷新的问题，这个问题能解决有更好了
" 开启/关闭对齐线
nmap <leader>il :IndentLinesToggle<CR>
" 设置Gvim的对齐线样式
if g:isGUI
let g:indentLine_char = "┊"
let g:indentLine_first_char = "┊"
endif
" 设置终端对齐线颜色，如果不喜欢可以将其注释掉采用默认颜色
let g:indentLine_color_term = 239
" 设置 GUI 对齐线颜色，如果不喜欢可以将其注释掉采用默认颜色
" let g:indentLine_color_gui = '#A4E57E'
" -----------------------------------------------------------------------------
" < vim-javacompleteex（也就是 javacomplete 增强版）插件配置 >
" -----------------------------------------------------------------------------
" java 补全插件
" -----------------------------------------------------------------------------
" < Mark--Karkat（也就是 Mark） 插件配置 >
" -----------------------------------------------------------------------------
" 给不同的单词高亮，表明不同的变量时很有用，详细帮助见 :h mark.txt
" " -----------------------------------------------------------------------------
" " < MiniBufExplorer 插件配置 >
" " -----------------------------------------------------------------------------
" " 快速浏览和操作Buffer
" " 主要用于同时打开多个文件并相与切换
" " let g:miniBufExplMapWindowNavArrows = 1 "用Ctrl加方向键切换到上下左右的窗口中去
" let g:miniBufExplMapWindowNavVim = 1 "用<C-k,j,h,l>切换到上下左右的窗口中去
" let g:miniBufExplMapCTabSwitchBufs = 1 "功能增强（不过好像只有在Windows中才有用）
" " <C-Tab> 向前循环切换到每个buffer上,并在但前窗口打开
" " <C-S-Tab> 向后循环切换到每个buffer上,并在当前窗口打开
" 在不使用 MiniBufExplorer 插件时也可用<C-k,j,h,l>切换到上下左右的窗口中去
noremap <c-k> <c-w>k
noremap <c-j> <c-w>j
noremap <c-h> <c-w>h
noremap <c-l> <c-w>l
" -----------------------------------------------------------------------------
" < neocomplcache 插件配置 >
" -----------------------------------------------------------------------------
" 关键字补全、文件路径补全、tag补全等等，各种，非常好用，速度超快。
let g:neocomplcache_enable_at_startup = 1 "vim 启动时启用插件
" let g:neocomplcache_disable_auto_complete = 1 "不自动弹出补全列表
" 在弹出补全列表后用 <c-p> 或 <c-n> 进行上下选择效果比较好
" -----------------------------------------------------------------------------
" < nerdcommenter 插件配置 >
" -----------------------------------------------------------------------------
" 我主要用于C/C++代码注释(其它的也行)
" 以下为插件默认快捷键，其中的说明是以C/C++为例的，其它语言类似
" <Leader>ci 以每行一个 /* */ 注释选中行(选中区域所在行)，再输入则取消注释
" <Leader>cm 以一个 /* */ 注释选中行(选中区域所在行)，再输入则称重复注释
" <Leader>cc 以每行一个 /* */ 注释选中行或区域，再输入则称重复注释
" <Leader>cu 取消选中区域(行)的注释，选中区域(行)内至少有一个 /* */
" <Leader>ca 在/*...*/与//这两种注释方式中切换（其它语言可能不一样了）
" <Leader>cA 行尾注释
let NERDSpaceDelims = 1 "在左注释符之后，右注释符之前留有空格
" -----------------------------------------------------------------------------
" < nerdtree 插件配置 >
" -----------------------------------------------------------------------------
" 有目录村结构的文件浏览插件
" 常规模式下输入 F2 调用插件
"nmap <F2> :NERDTreeToggle<CR>
" -----------------------------------------------------------------------------
" < omnicppcomplete 插件配置 >
" -----------------------------------------------------------------------------
" 用于C/C++代码补全，这种补全主要针对命名空间、类、结构、共同体等进行补全，详细
" 说明可以参考帮助或网络教程等
" 使用前先执行如下 ctags 命令（本配置中可以直接使用 ccvext 插件来执行以下命令）
" ctags -R --c++-kinds=+p --fields=+iaS --extra=+q
" 我使用上面的参数生成标签后，对函数使用跳转时会出现多个选择
" 所以我就将--c++-kinds=+p参数给去掉了，如果大侠有什么其它解决方法希望不要保留呀
filetype plugin on
set completeopt=menu "关闭预览窗口
set nocp
set ofu=syntaxcomplete#Complete
set tags+=tags
set completeopt=menu,longest,menuone
let OmniCpp_NamespaceSearch=2
let OmniCpp_GlobalScopeSearch=1
let OmniCpp_ShowAccess=1
let OmniCpp_ShowPrototypeInAbbr=1
let OmniCpp_MayCompleteDot=1
let OmniCpp_MayCompleteArrow=1
let OmniCpp_MayCompleteScope=1
let OmniCpp_DefaultNamespaces=["std", "_GLIBCXX_STD"]
let OmniCpp_SelectFirstItem=2
let OmniCpp_DisplayMode=1
au CursorMovedI,InsertLeave * if pumvisible() == 0|silent! pclose|endif
" -----------------------------------------------------------------------------
" < powerline 插件配置 >
" -----------------------------------------------------------------------------
" 状态栏插件，更好的状态栏效果
" -----------------------------------------------------------------------------
" < repeat 插件配置 >
" -----------------------------------------------------------------------------
" 主要用"."命令来重复上次插件使用的命令
" -----------------------------------------------------------------------------
" < snipMate 插件配置 >
" -----------------------------------------------------------------------------
" 用于各种代码补全，这种补全是一种对代码中的词与代码块的缩写补全，详细用法可以参
" 考使用说明或网络教程等。不过有时候也会与 supertab 插件在补全时产生冲突，如果大
" 侠有什么其它解决方法希望不要保留呀
" -----------------------------------------------------------------------------
" < SrcExpl 插件配置 >
" -----------------------------------------------------------------------------
" 增强源代码浏览，其功能就像Windows中的"Source Insight"
"nmap <F3> :SrcExplToggle<CR> "打开/闭浏览窗口
" -----------------------------------------------------------------------------
" < std_c 插件配置 >
" -----------------------------------------------------------------------------
" 用于增强C语法高亮
" 启用 // 注视风格
let c_cpp_comments = 0
" -----------------------------------------------------------------------------
" < surround 插件配置 >
" -----------------------------------------------------------------------------
" 快速给单词/句子两边增加符号（包括html标签），缺点是不能用"."来重复命令
" 不过 repeat 插件可以解决这个问题，详细帮助见 :h surround.txt
" -----------------------------------------------------------------------------
" < Syntastic 插件配置 >
" -----------------------------------------------------------------------------
" 用于保存文件时查检语法
" -----------------------------------------------------------------------------
" < Tagbar 插件配置 >
" -----------------------------------------------------------------------------
" 相对 TagList 能更好的支持面向对象
" 常规模式下输入 tb 调用插件，如果有打开 TagList 窗口则先将其关闭
nmap tb :TlistClose<CR>:TagbarToggle<CR>
let g:tagbar_width=30 "设置窗口宽度
" let g:tagbar_left=1 "在左侧窗口中显示
" -----------------------------------------------------------------------------
" < TagList 插件配置 >
" -----------------------------------------------------------------------------
" 高效地浏览源码, 其功能就像vc中的workpace
" 那里面列出了当前文件中的所有宏,全局变量, 函数名等
" 常规模式下输入 tl 调用插件，如果有打开 Tagbar 窗口则先将其关闭
nmap tl :TagbarClose<CR>:Tlist<CR>
let Tlist_Show_One_File=1 "只显示当前文件的tags
" let Tlist_Enable_Fold_Column=0 "使taglist插件不显示左边的折叠行
let Tlist_Exit_OnlyWindow=1 "如果Taglist窗口是最后一个窗口则退出Vim
let Tlist_File_Fold_Auto_Close=1 "自动折叠
let Tlist_WinWidth=30 "设置窗口宽度
let Tlist_Use_Right_Window=1 "在右侧窗口中显示
" -----------------------------------------------------------------------------
" < txtbrowser 插件配置 >
" -----------------------------------------------------------------------------
" 用于文本文件生成标签与与语法高亮（调用TagList插件生成标签，如果可以）
au BufRead,BufNewFile *.txt setlocal ft=txt
" -----------------------------------------------------------------------------
" < ZoomWin 插件配置 >
" -----------------------------------------------------------------------------
" 用于分割窗口的最大化与还原
" 常规模式下按快捷键 <c-w>o 在最大化与还原间切换
" =============================================================================
" << 以下为常用工具配置 >>
" =============================================================================
" -----------------------------------------------------------------------------
" < cscope 工具配置 >
" -----------------------------------------------------------------------------
" 用Cscope自己的话说 - "你可以把它当做是超过频的ctags"
if has("cscope")
"设定可以使用 quickfix 窗口来查看 cscope 结果
set cscopequickfix=s-,c-,d-,i-,t-,e-
"使支持用 Ctrl+] 和 Ctrl+t 快捷键在代码间跳转
set cscopetag
"如果你想反向搜索顺序设置为1
set csto=0
"在当前目录中添加任何数据库
if filereadable("cscope.out")
cs add cscope.out
"否则添加数据库环境中所指出的
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set cscopeverbose
"快捷键设置
nmap ss :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap sg :cs find g <C-R>=expand("<cword>")<CR><CR>
nmap sc :cs find c <C-R>=expand("<cword>")<CR><CR>
nmap st :cs find t <C-R>=expand("<cword>")<CR><CR>
nmap se :cs find e <C-R>=expand("<cword>")<CR><CR>
nmap sf :cs find f <C-R>=expand("<cfile>")<CR><CR>
nmap si :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap sd :cs find d <C-R>=expand("<cword>")<CR><CR>
endif
" -----------------------------------------------------------------------------
" < ctags 工具配置 >
" -----------------------------------------------------------------------------
" 对浏览代码非常的方便,可以在函数,变量之间跳转等
set tags=./tags; "向上级目录递归查找tags文件（好像只有在Windows下才有用）
" -----------------------------------------------------------------------------
"< winManager 工具配置 >
" -----------------------------------------------------------------------------
let g:AutoOpenWinManager=1
let g:winManagerWindowLayout='FileExplorer|TagList'
nmap wm :WMToggle<cr>
map <silent> <F3> :WMToggle<cr>
" -----------------------------------------------------------------------------
" < gvimfullscreen 工具配置 > 请确保已安装了工具
" -----------------------------------------------------------------------------
" 用于 Windows Gvim 全屏窗口，可用 F11 切换
" 全屏后再隐藏菜单栏、工具栏、滚动条效果更好
if (g:iswindows && g:isGUI)
nmap <F11> <Esc>:call libcallnr("gvimfullscreen.dll", "ToggleFullScreen", 0)<CR>
endif
" -----------------------------------------------------------------------------
" < vimtweak 工具配置 > 请确保以已装了工具
" -----------------------------------------------------------------------------
" 这里只用于窗口透明与置顶
" 常规模式下 Ctrl + Up（上方向键） 增加不透明度，Ctrl + Down（下方向键） 减少不透明度，<Leader>t 窗口置顶与否切换
if (g:iswindows && g:isGUI)
let g:Current_Alpha = 255
let g:Top_Most = 0
func! Alpha_add()
let g:Current_Alpha = g:Current_Alpha + 10
if g:Current_Alpha > 255
let g:Current_Alpha = 255
endif
call libcallnr("vimtweak.dll","SetAlpha",g:Current_Alpha)
endfunc
func! Alpha_sub()
let g:Current_Alpha = g:Current_Alpha - 10
if g:Current_Alpha < 155
let g:Current_Alpha = 155
endif
call libcallnr("vimtweak.dll","SetAlpha",g:Current_Alpha)
endfunc
func! Top_window()
if g:Top_Most == 0
call libcallnr("vimtweak.dll","EnableTopMost",1)
let g:Top_Most = 1
else
call libcallnr("vimtweak.dll","EnableTopMost",0)
let g:Top_Most = 0
endif
endfunc
"快捷键设置
nmap <c-up> :call Alpha_add()<CR>
nmap <c-down> :call Alpha_sub()<CR>
nmap <leader>t :call Top_window()<CR>
endif
" -----------------------------------------------------------------------------
" < 自动注释 工具配置 >
" -----------------------------------------------------------------------------
map fg : Dox<cr>
let g:DoxygenToolkit_authorName="zhangbo E-mail:zhangbo@hisome.com"
let g:DoxygenToolkit_licenseTag="My own license\<enter>"
let g:DoxygenToolkit_undocTag="DOXIGEN_SKIP_BLOCK"
let g:DoxygenToolkit_briefTag_pre = "@brief\t"
let g:DoxygenToolkit_paramTag_pre = "@param\t"
let g:DoxygenToolkit_returnTag = "@return\t"
let g:DoxygenToolkit_briefTag_funcName = "no"
let g:DoxygenToolkit_maxFunctionProtoLines = 30
" =============================================================================
" << 以下为常用自动命令配置 >>
" =============================================================================
" 自动切换目录为当前编辑文件所在目录
au BufRead,BufNewFile,BufEnter * cd %:p:h
" =============================================================================
" << 其它 >>
" =============================================================================
" 注：上面配置中的"<Leader>"在本软件中设置为"\"键（引号里的反斜杠），如<Leader>t
" 指在常规模式下按"\"键加"t"键，这里不是同时按，而是先按"\"键后按"t"键，间隔在一
" 秒内，而<Leader>cs是先按"\"键再按"c"又再按"s"键；如要修改"<leader>"键，可以把
" 下面的设置取消注释，并修改双引号中的键为你想要的，如修改为逗号键。
" let mapleader = ","
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- vim配置文件 .vimrc 。按照那篇将vim打造成IDE来的，成功加入各项功能，另外改善了书签不能保存的情况
- 我的vim的vimrc配置文件，保存用
- 保存下自己的vim配置文件
- vim配置文件 .vimrc
- vim的.vimrc配置文件中如果有文件路径存在空格的解决方法
- vim真是越用越好用，贴一下配置文件.vimrc
- 改写vim配置文件vimrc来实现显示行号，语法高亮，自动缩进功能
- 我的vim的配置文件.vimrc的内容（适用于vim7.2）
- VIM配置文件vimrc
- Vim的行号、语法显示等设置(.vimrc文件的配置)以及乱码解决
- vim配置技巧——在vim中使用autocmd命令在保存文件时自动插入最后修改日期和时间
- Vim的行号、语法显示等设置，即.vimrc文件的配置
- VIM配置文件vimrc
- Vim的行号、语法显示等设置，即.vimrc文件的配置
- Vim 配置文件===~/.vimrc
- vim配置文件.vimrc
- vim 配置文件.vimrc[放在home目录下哦]
- VIM配置文件vimrc
- Ubuntu下改写vim配置文件vimrc来实现显示行号，语法高亮，自动缩进功能
- 我的vim配置文件.vimrc以及用到的几个插件(持续更新)