no cortex-m sw device found 问题解决
2016-10-18 10:45
351 查看
1.确保接线正确;
2. 高版本jlink固件可识别出赝品jlink,而MDK5.x版本要求SEGGER固件高于V4.78,排查是否是盗版jlink导致该问题发生。若是,可网购jlink-ob小调试器;
3.如果是在程序烧写成功一次后,第二次烧写时报错no cortex-m sw device found,极有可能是软件中设置了SWDIO或SWCLK I/O口的端口模式,由于I/O口一直被占用,使芯片sw端口不能用于下载调试。解决办法:先将boot0保持拉高,再按下复位,然后boot0拉低,之后可以正常使用。
2. 高版本jlink固件可识别出赝品jlink,而MDK5.x版本要求SEGGER固件高于V4.78,排查是否是盗版jlink导致该问题发生。若是,可网购jlink-ob小调试器;
3.如果是在程序烧写成功一次后,第二次烧写时报错no cortex-m sw device found,极有可能是软件中设置了SWDIO或SWCLK I/O口的端口模式,由于I/O口一直被占用,使芯片sw端口不能用于下载调试。解决办法:先将boot0保持拉高,再按下复位,然后boot0拉低,之后可以正常使用。
相关文章推荐
- NO Cortex-M Device found in JTAG chain常见问题及解决方法.
- No compatible targets were found,Do you wish to add a new Android Virtual Device?问题解决方法。
- linux网络设置和虚拟机克隆转移之后Error:No suitable device found:no device found for connection 'System eth0'问题解决
- no cortex-m sw device found
- keil下出现 No Cortex-M Device found in JTAG chain...出现的问题
- 关于No Cortex-M Device found in JTAG chain...出现的问题
- 使用HAL库出现No Cortex-M SW Device Found
- 关于mini2440烧写supervivi出现no nand device found问题的解决办法
- 解决:no device found for connection “ System eth0”问题
- 解决:no device found for connection ‘ System eth0′问题
- uboot 2008.10 No NAND device found!!! 0 MiB 问题的解决!
- 关于在IAR上用ST-Link下载出现“ST-Link, No MCU device found Session aborted! ”问题解决办法
- 解决:no device found for connection ‘ System eth0′问题
- Fedora14安装时 No root device found问题解决
- linux网络设置和虚拟机克隆转移之后Error:No suitable device found:no device found for connection 'System eth0'问题解决
- 解决:No configuration found. Configuring ehcache from ehcache-failsafe.xml 问题
- No instrumentation runner found .....问题解决
- configure: error: no acceptable C compiler found in $PATH 问题解决
- No JVM could be found on your system.Please define EXE4J_JAVA_HOME问题解决方法
- Fedora 16 用Live CD 修复grub2,附“No root device”问题解决