安装：

• 下载 zookeeper ：http://zookeeper.apache.org/releases.html#download。
• 将 zookeeper-3.4.7.tar.gz 解压到目录，/usr/local/zookeeper-3.4.7。
• 拷贝zookeeper的conf/zoo_sample.cfg并重命名为zoo.cfg，内容修改如下：
  

  # The number of milliseconds of each tick
  tickTime=2000
  # The number of ticks that the initial
  # synchronization phase can take
  initLimit=10
  # The number of ticks that can pass between
  # sending a request and getting an acknowledgement
  syncLimit=5
  # the directory where the snapshot is stored.
  # do not use /tmp for storage, /tmp here is just
  # example sakes.
  dataDir=/usr/local/zookeeper-3.4.7/data
  # the port at which the clients will connect
  clientPort=2181
  # the maximum number of client connections.
  # increase this if you need to handle more clients
  #maxClientCnxns=60
  #
  # Be sure to read the maintenance section of the
  # administrator guide before turning on autopurge.
  #
  # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
  #
  # The number of snapshots to retain in dataDir
  #autopurge.snapRetainCount=3
  # Purge task interval in hours
  # Set to "0" to disable auto purge feature
  #autopurge.purgeInterval=1
  
  # log dir
  dataLogDir=/usr/local/zookeeper-3.4.7/log

• 建立zookeeper集群的myid文件 
  

  cd /usr/local/zookeeper-3.4.7/data
  echo 1 > myid

• 启动zookeeper
  

  cd /usr/local/zookeeper-3.4.7/bin
  ./zkServer.sh start

• 下载 storm ： http://storm.apache.org/downloads.html 。
• 将 apache-storm-0.10.0.tar.gz 解压到目录，/usr/local/storm-0.10.0/bin/apache-storm-0.10.0 。

• 配置nimbus
  修改storm的/usr/local/storm-0.10.0/conf/storm.yaml文件如下：

########### These MUST be filled in for a storm configuration
storm.zookeeper.servers:
- "192.168.1.63"
#     - "server2"
#
nimbus.host: "192.168.1.63"
#
#
# ##### These may optionally be filled in:
#
## List of custom serializations
# topology.kryo.register:
#     - org.mycompany.MyType
#     - org.mycompany.MyType2: org.mycompany.MyType2Serializer
#
## List of custom kryo decorators
# topology.kryo.decorators:
#     - org.mycompany.MyDecorator
#
## Locations of the drpc servers
# drpc.servers:
#     - "server1"
#     - "server2"

## Metrics Consumers
# topology.metrics.consumer.register:
#   - class: "backtype.storm.metric.LoggingMetricsConsumer"
#     parallelism.hint: 1
#   - class: "org.mycompany.MyMetricsConsumer"
#     parallelism.hint: 1
#     argument:
#       - endpoint: "metrics-collector.mycompany.org"

• 启动storm

cd /usr/local/storm-0.10.0/
./storm nimbus >/dev/null 2>&1 &
./storm supervisor >/dev/null 2>&1 &
./storm ui >/dev/null 2>&1 &

• 通过 http://192.168.1.63:8080/index.html 可以打开Storm Web UI，看看Storm集群的状态。

./storm jar /home/jsecode/topology/storm-starter-0.10.0.jar storm.ykd.test.SegmentTopologyMain /home/jsecode/topology/testdata/gpsdata

• 日志配置
  修改文件 /usr/local/storm-0.10.0/log4j2/worker.xml

<configuration monitorInterval="60">
<properties>
<property name="pattern">%d{yyyy-MM-dd HH:mm:ss.SSS} %c{1.} [%p] %msg%n</property>
<property name="patternNoTime">%msg%n</property>
</properties>
<appenders>

<RollingFile name="SegmentLog"
fileName="${sys:storm.log.dir}/gpsSegmentw.log"
filePattern="${sys:storm.log.dir}/gpsSegmentw.%i.log">
<PatternLayout>
<pattern>${pattern}</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
</Policies>
<DefaultRolloverStrategy max="9"/>
</RollingFile>

<RollingFile name="RsLog"
fileName="${sys:storm.log.dir}/rs.log"
filePattern="${sys:storm.log.dir}/rs.%i.log">
<PatternLayout>
<pattern>${pattern}</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
</Policies>
<DefaultRolloverStrategy max="9"/>
</RollingFile>

<RollingFile name="A1"
fileName="${sys:storm.log.dir}/${sys:logfile.name}"
filePattern="${sys:storm.log.dir}/${sys:logfile.name}.%i.gz">
<PatternLayout>
<pattern>${pattern}</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
</Policies>
<DefaultRolloverStrategy max="9"/>
</RollingFile>
<RollingFile name="STDOUT"
fileName="${sys:storm.log.dir}/${sys:logfile.name}.out"
filePattern="${sys:storm.log.dir}/${sys:logfile.name}.out.%i.gz">
<PatternLayout>
<pattern>${patternNoTime}</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
</Policies>
<DefaultRolloverStrategy max="4"/>
</RollingFile>
<RollingFile name="STDERR"
fileName="${sys:storm.log.dir}/${sys:logfile.name}.err"
filePattern="${sys:storm.log.dir}/${sys:logfile.name}.err.%i.gz">
<PatternLayout>
<pattern>${patternNoTime}</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="100 MB"/> <!-- Or every 100 MB -->
</Policies>
<DefaultRolloverStrategy max="4"/>
</RollingFile>
<Syslog name="syslog" format="RFC5424" host="localhost" port="514"
protocol="UDP" appName="[${sys:storm.id}:${sys:worker.port}]" mdcId="mdc" includeMDC="true"
facility="LOCAL5" enterpriseNumber="18060" newLine="true" exceptionPattern="%rEx{full}"
messageId="[${sys:user.name}:${sys:logging.sensitivity}]" id="storm"/>
</appenders>
<loggers>

<Logger name="storm.ykd.test.bolt.SavePosdataTrackSegmentBolt" level="debug">
<AppenderRef ref="RsLog"/>
</Logger>

<Logger name="storm.ykd.test" level="debug">
<AppenderRef ref="SegmentLog"/>
</Logger>

<root level="info"> <!-- We log everything -->
<appender-ref ref="A1"/>
<appender-ref ref="syslog"/>
</root>
<Logger name="STDERR" level="INFO">
<appender-ref ref="STDERR"/>
<appender-ref ref="syslog"/>
</Logger>
<Logger name="STDOUT" level="INFO">
<appender-ref ref="STDOUT"/>
<appender-ref ref="syslog"/>
</Logger>
</loggers>
</configuration>