华为5700设置某一端口组播屏蔽
2016-08-30 13:18
375 查看
本实例中以屏蔽 GigabitEthernet0/0/6 的UDP为例,亲测通过。
[Quidway]
[Quidway]acl 3000
[Quidway-acl-adv-3000]rule 5 deny udp
[Quidway-acl-adv-3000]quit
[Quidway]
Oct 1 2008 07:54:02-05:13 Quidway DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 3, the change loop count is 0, and the maximum number of records is 4095.int gi
[Quidway]int GigabitEthernet 0/0/6
[Quidway-GigabitEthernet0/0/6]traffic-filter outbound acl 3000 //使该端口GigabitEthernet0/0/6不向外传输UDP;
[Quidway-GigabitEthernet0/0/6]traffic-filter inbound acl 3000 //使该端口GigabitEthernet0/0/6不向内传输UDP,与上一命令可以二选一;
[Quidway-GigabitEthernet0/0/6]quit
[Quidway]
Oct 1 2008 07:54:52-05:13 Quidway DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 4, the change loop count is 0, and the maximum number of records is 4095.
[Quidway]quit
<Quidway>save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Oct 1 2008 07:55:13-05:13 Quidway %%01CFM/4/SAVE(l)[2]:The user chose Y when deciding whether to save the configuration to the device.
Warning: AutoConfig will stop in the next phase for the manual intervention.
Now saving the current configuration to the slot 0.
Save the configuration successfully.
[Quidway]
[Quidway]acl 3000
[Quidway-acl-adv-3000]rule 5 deny udp
[Quidway-acl-adv-3000]quit
[Quidway]
Oct 1 2008 07:54:02-05:13 Quidway DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 3, the change loop count is 0, and the maximum number of records is 4095.int gi
[Quidway]int GigabitEthernet 0/0/6
[Quidway-GigabitEthernet0/0/6]traffic-filter outbound acl 3000 //使该端口GigabitEthernet0/0/6不向外传输UDP;
[Quidway-GigabitEthernet0/0/6]traffic-filter inbound acl 3000 //使该端口GigabitEthernet0/0/6不向内传输UDP,与上一命令可以二选一;
[Quidway-GigabitEthernet0/0/6]quit
[Quidway]
Oct 1 2008 07:54:52-05:13 Quidway DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 4, the change loop count is 0, and the maximum number of records is 4095.
[Quidway]quit
<Quidway>save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Oct 1 2008 07:55:13-05:13 Quidway %%01CFM/4/SAVE(l)[2]:The user chose Y when deciding whether to save the configuration to the device.
Warning: AutoConfig will stop in the next phase for the manual intervention.
Now saving the current configuration to the slot 0.
Save the configuration successfully.
相关文章推荐
- 华为5700设置某一端口组播屏蔽
- 华为s5700acl设置
- 华为交换机批量设置端口trunk或者access
- 飞鸽屏蔽信息的端口设置
- 老设备华为6503交换机端口镜像设置
- 华为S5700设置端口镜像
- WEB服务器应用_服务器安全设置之_IP安全策略 (仅仅列出需要屏蔽或阻止的端口或协议)
- Trunk(端口汇聚)的概念与设置
- TP—Lingk路由端口设置
- ADSL猫端口映射设置
- 华为各种型号交换机端口镜像配置方法总结
- DB108的ADSL猫设置端口映射
- 计算机端口详细列表-防火墙设置必备的参考资料[推荐]
- Tomcat端口设置
- VC 控件的字体控制 若将字体设置成“宋体、仿宋—GB2312、隶书、幼圆”中的某一字体时,需将lfCharSet设置成GB2312—CHARSET才使设置的字体有效
- 中兴ZXDSL831端口映射设置方法
- 关闭端口防止病毒与黑客入侵的设置方法
- 原来BT也要设置端口映射的,今天才发现
- 设置镜像端口检测全网通讯
- 华为2126型号交换机限速设置 推荐