linux 下修改ip地址为静态ip地址
2016-06-26 21:37
447 查看
1. 修改 /etc/sysconfig/network-scripts/ifcfg-eth0 文件
DEVICE="eth0"
BOOTPROTO="static" #原值为dhcp
HWADDR="00:0c:29:ba:18:25"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
#以下是修改为静态时需要加
IPADDR=192.168.71.132
GATEWAY=192.168.0.1
NETMASK=255.255.255.0
DNS1=202.106.195.68
DNS2=202.106.0.20
2. 重启网络 : /etc/init.d/network restart 或者 service
network restart
ps 遇到的问题
重启网络重启不了 原因:GATEWAY: command not found /etc/sysconfig/network-scripts/ifcfg-eth0: line 15: GATEWAY: command not found Device eth0 does not seem to be present, delaying initialization.
解决办法:
打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
DEVICE="eth0"
BOOTPROTO="static" #原值为dhcp
HWADDR="00:0c:29:ba:18:25"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
#以下是修改为静态时需要加
IPADDR=192.168.71.132
GATEWAY=192.168.0.1
NETMASK=255.255.255.0
DNS1=202.106.195.68
DNS2=202.106.0.20
2. 重启网络 : /etc/init.d/network restart 或者 service
network restart
ps 遇到的问题
重启网络重启不了 原因:GATEWAY: command not found /etc/sysconfig/network-scripts/ifcfg-eth0: line 15: GATEWAY: command not found Device eth0 does not seem to be present, delaying initialization.
解决办法:
打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
相关文章推荐
- linux系统ln命令的用法
- Linux dhcp服务器设置(可复制代码)
- linux的关于ssh 免密码登陆的问题
- 学习书签
- Linux下的高级拾色器—Pick
- 在CentOS7上配置Open vSwitch和VXLAN
- Openvswitch在CentOS 6.6下的安装
- Linux命令详解
- centos下安装mysql,使用rpm包的形式
- LINUX-AWK简明教程
- Linux学习之Debian(一):常用命令的安装-rz -sz
- openvswitch centos6.X 安装及使用
- linux中ldconfig的使用介绍
- linux内核内存管理(zone_dma zone_normal zone_highmem)
- 如何使用GCC编译器
- linux使用su切换用户提示 Authentication failure的解决方法
- Linux spi驱动 (三)
- Linux 磁盘分区 Fdisk
- 【51CTO学院三周年】Linux想说爱你很容易
- Linux 多线程调试(内存占用、死循环、CPU占用率高……)