fspecial()函数解析
2016-05-18 22:12
337 查看
今天来总结一下fspecial()函数用法:
h = fspecial(type)
h = fspecial(type,para)
h = fspecial(type, pare, sigma)
其中type指定算子的类型,pare指定相应的参数,sigmasigma表示滤波器的标准差,单位为像素,默认值为0.5。
1、’average’
为均值滤波,参数为hsize代表模板尺寸,默认值为【3,3】。
H = FSPECIAL(‘average’,HSIZE) returns an averaging filter H of size
HSIZE. HSIZE can be a vector specifying the number of rows and columns in
H or a scalar, in which case H is a square matrix.
The default HSIZE is [3 3].
2、’gaussian’
为高斯低通滤波,有两个参数,hsize表示模板尺寸,默认值为【3 3】,sigma为滤波器的标准值,单位为像素,默认值为0.5.
H = FSPECIAL(‘gaussian’,HSIZE,SIGMA) returns a rotationally
symmetric Gaussian lowpass filter
of size HSIZE with standard
deviation SIGMA (positive). HSIZE can be a vector specifying the
number of rows and columns in H or a scalar, in which case H is a
square matrix.
The default HSIZE is [3 3], the default SIGMA is 0.5.
3、’laplacian’
为拉普拉斯算子,参数alpha用于控制算子形状,取值范围为【0,1】,默认值为0.2.
H = FSPECIAL(‘laplacian’,ALPHA) returns a 3-by-3 filter
approximating the shape of the two-dimensional Laplacian
operator. The parameter ALPHA controls the shape of the
Laplacian and must be in the range 0.0 to 1.0.
The default ALPHA is 0.2.
4、’log’
为拉普拉斯高斯算子,有两个参数,hsize表示模板尺寸,默认值为【3 3】,sigma为滤波器的标准差,单位为像素,默认值为0.5.
H = FSPECIAL(‘log’,HSIZE,SIGMA) returns a rotationally symmetric
Laplacian of Gaussian filter of size HSIZE with standard deviation
SIGMA (positive). HSIZE can be a vector specifying the number of rows
and columns in H or a scalar, in which case H is a square matrix.
The default HSIZE is [5 5], the default SIGMA is 0.5.
5、’prewitt’
用于边缘增强,大小为【3 3】,无参数
H = FSPECIAL(‘prewitt’) returns 3-by-3 filter that emphasizes
horizontal edges by approximating a vertical gradient. If you need to
emphasize vertical edges, transpose the filter H: H’.
[1 1 1;0 0 0;-1 -1 -1].
6、’sobel’
用于边缘提取,无参数
H = FSPECIAL(‘sobel’) returns 3-by-3 filter that emphasizes
horizontal edges utilizing the smoothing effect by approximating a
vertical gradient. If you need to emphasize vertical edges, transpose
the filter H: H’.
[1 2 1;0 0 0;-1 -2 -1].
7、’unsharp’
为对比度增强滤波器。参数alpha用于控制滤波器的形状,范围为【0,1】,默认值为0.2.
H = FSPECIAL(‘unsharp’,ALPHA) returns a 3-by-3 unsharp contrast
enhancement filter. FSPECIAL creates the unsharp filter from the
negative of the Laplacian filter with parameter ALPHA. ALPHA controls
the shape of the Laplacian and must be in the range 0.0 to 1.0.
The default ALPHA is 0.2.
8、’motion’
为运动模糊算子,有两个参数,表示摄像物体逆时针方向以theta角度运动了len个像素,len的默认值为9,theta的默认值为0;
H = FSPECIAL(‘motion’,LEN,THETA) returns a filter to approximate, once
convolved with an image, the linear motion of a camera by LEN pixels,
with an angle of THETA degrees in a counter-clockwise direction. The
filter becomes a vector for horizontal and vertical motions.
The
default LEN is 9, the default THETA is 0, which corresponds to a
horizontal motion of 9 pixels.
9、’disk’
为圆形区域均值滤波,参数为radius代表区域半径,默认值为5.
H = FSPECIAL(‘disk’,RADIUS) returns a circular averaging filter
(pillbox) within the square matrix of side 2*RADIUS+1.
The default RADIUS is 5.
h = fspecial(type)
h = fspecial(type,para)
h = fspecial(type, pare, sigma)
其中type指定算子的类型,pare指定相应的参数,sigmasigma表示滤波器的标准差,单位为像素,默认值为0.5。
1、’average’
为均值滤波,参数为hsize代表模板尺寸,默认值为【3,3】。
H = FSPECIAL(‘average’,HSIZE) returns an averaging filter H of size
HSIZE. HSIZE can be a vector specifying the number of rows and columns in
H or a scalar, in which case H is a square matrix.
The default HSIZE is [3 3].
2、’gaussian’
为高斯低通滤波,有两个参数,hsize表示模板尺寸,默认值为【3 3】,sigma为滤波器的标准值,单位为像素,默认值为0.5.
H = FSPECIAL(‘gaussian’,HSIZE,SIGMA) returns a rotationally
symmetric Gaussian lowpass filter
of size HSIZE with standard
deviation SIGMA (positive). HSIZE can be a vector specifying the
number of rows and columns in H or a scalar, in which case H is a
square matrix.
The default HSIZE is [3 3], the default SIGMA is 0.5.
3、’laplacian’
为拉普拉斯算子,参数alpha用于控制算子形状,取值范围为【0,1】,默认值为0.2.
H = FSPECIAL(‘laplacian’,ALPHA) returns a 3-by-3 filter
approximating the shape of the two-dimensional Laplacian
operator. The parameter ALPHA controls the shape of the
Laplacian and must be in the range 0.0 to 1.0.
The default ALPHA is 0.2.
4、’log’
为拉普拉斯高斯算子,有两个参数,hsize表示模板尺寸,默认值为【3 3】,sigma为滤波器的标准差,单位为像素,默认值为0.5.
H = FSPECIAL(‘log’,HSIZE,SIGMA) returns a rotationally symmetric
Laplacian of Gaussian filter of size HSIZE with standard deviation
SIGMA (positive). HSIZE can be a vector specifying the number of rows
and columns in H or a scalar, in which case H is a square matrix.
The default HSIZE is [5 5], the default SIGMA is 0.5.
5、’prewitt’
用于边缘增强,大小为【3 3】,无参数
H = FSPECIAL(‘prewitt’) returns 3-by-3 filter that emphasizes
horizontal edges by approximating a vertical gradient. If you need to
emphasize vertical edges, transpose the filter H: H’.
[1 1 1;0 0 0;-1 -1 -1].
6、’sobel’
用于边缘提取,无参数
H = FSPECIAL(‘sobel’) returns 3-by-3 filter that emphasizes
horizontal edges utilizing the smoothing effect by approximating a
vertical gradient. If you need to emphasize vertical edges, transpose
the filter H: H’.
[1 2 1;0 0 0;-1 -2 -1].
7、’unsharp’
为对比度增强滤波器。参数alpha用于控制滤波器的形状,范围为【0,1】,默认值为0.2.
H = FSPECIAL(‘unsharp’,ALPHA) returns a 3-by-3 unsharp contrast
enhancement filter. FSPECIAL creates the unsharp filter from the
negative of the Laplacian filter with parameter ALPHA. ALPHA controls
the shape of the Laplacian and must be in the range 0.0 to 1.0.
The default ALPHA is 0.2.
8、’motion’
为运动模糊算子,有两个参数,表示摄像物体逆时针方向以theta角度运动了len个像素,len的默认值为9,theta的默认值为0;
H = FSPECIAL(‘motion’,LEN,THETA) returns a filter to approximate, once
convolved with an image, the linear motion of a camera by LEN pixels,
with an angle of THETA degrees in a counter-clockwise direction. The
filter becomes a vector for horizontal and vertical motions.
The
default LEN is 9, the default THETA is 0, which corresponds to a
horizontal motion of 9 pixels.
9、’disk’
为圆形区域均值滤波,参数为radius代表区域半径,默认值为5.
H = FSPECIAL(‘disk’,RADIUS) returns a circular averaging filter
(pillbox) within the square matrix of side 2*RADIUS+1.
The default RADIUS is 5.
相关文章推荐
- 解析在main函数之前调用函数以及对设计的作用详解
- 详解Matlab中 sort 函数用法
- java和matlab画多边形闭合折线图示例讲解
- C#调用Matlab生成的dll方法的详细说明
- 简述Matlab中size()函数的用法
- 从java中调用matlab详细介绍
- 稀疏自动编码器 (Sparse Autoencoder)
- 详解Matlab中 sort 函数用法
- 简述Matlab中size()函数的用法
- VC++与Matlab混合编程的快速实现
- Matlab 矩阵运算
- matlab与opencv部分函数的对照
- matlab神经网络工具箱创建神经网络
- Matlab
- MATLAB 入门教程
- matlab函数_连通区域
- MATLAB中函数模式和命令模式的区别
- MATLAB 添加自定义的模块到simulink库浏览器
- Export Figures for LaTeX Writing