62. Unique Paths
2016-05-11 15:25
435 查看
题目:
A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below).
The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Finish' in the diagram below).
How many possible unique paths are there?
Above is a 3 x 7 grid. How many possible unique paths are there?
Note: m and n will be at most 100.
题意:
如上图所示,左上的机器人到右下的星星处有多少种不同的走法。
思路:
DP问题。动态规划问题。题意可知一个格子到另一个格子只能向下或者向右。故第一行,第一列到达的唯一路径都只有一种可能,则result[0][j]= result[i][0]=1。而其他格子到达的路径result[i][j] = reesult[i-1][j] + result[i][j-1];
代码:
代码:
代码:
A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below).
The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Finish' in the diagram below).
How many possible unique paths are there?
Above is a 3 x 7 grid. How many possible unique paths are there?
Note: m and n will be at most 100.
题意:
如上图所示,左上的机器人到右下的星星处有多少种不同的走法。
思路:
DP问题。动态规划问题。题意可知一个格子到另一个格子只能向下或者向右。故第一行,第一列到达的唯一路径都只有一种可能,则result[0][j]= result[i][0]=1。而其他格子到达的路径result[i][j] = reesult[i-1][j] + result[i][j-1];
代码:
class Solution { public: int uniquePaths(int m, int n) { vector<vector<int>> result(m, vector<int>(n, 1)); for(int i=1; i<m; i++){ for(int j=1; j<n; j++){ result[i][j] = result[i-1][j] + result[i][j-1]; } } return result[m-1][n-1]; } };上面代码中保存了每个格子对应到达的唯一路径数,题目只要求得到唯一的整数,不需要保存到达每个格子的唯一路径数,故只需要维持两个数组保存向下与向右方向的唯一路径数即可。
代码:
class Solution { public: int uniquePaths(int m, int n) { if(m>n){ return uniquePaths(n, m); } vector<int> pre(m, 1); vector<int> cur(m, 1); for(int i=1; i<n; i++){ for(int j=1; j<m; j++){ cur[j] = cur[j-1]+pre[j]; } swap(pre, cur); } return pre[m-1]; } };还可以进一步缩紧所花费的空间复杂度。不要维持一个pre数组。直接在元素上进行修改。
代码:
class Solution { public: int uniquePaths(int m, int n) { if(m>n){ return uniquePaths(n, m); } vector<int> cur(m, 1); for(int i=1; i<n; i++){ for(int j=1; j<m; j++){ cur[j] += cur[j-1]; } } return cur[m-1]; } };转载地址:https://leetcode.com/discuss/38353/0ms-5-lines-dp-solution-in-c-with-explanations
相关文章推荐
- dequeueReusableCellWithIdentifier 总是返回nil
- iOS UIDevice设备信息,传感器设置,横竖屏判断操作,手机电池操作
- 自定义UICollectionViewLayout实现瀑布流
- OGG由于GGS处理SEQUENCE方式导致Ext延时_NOAUTOMATICSEQUENCEFLUSH处理
- IOS开发-UIView之动画效果的实现方法(合集)
- Executors.newFixedThreadPool和ArrayBlockingQueue一点使用心得
- iOS开发之基础视图——UILabel
- UITextField 控制文本输入小数点和小数点后几位
- django1.8 提示(1_8.W001) The standalone TEMPLATE_* settings were deprecated in Django 1.8 and the TEMPLATES dictionary takes precedence. You must put the values of the following settings into your defau
- iOS开发 贝塞尔曲线UIBezierPath(后记)
- 学习笔记-UITableView的数据源(dataSource)和代理(delegate)
- iOS开发 贝塞尔曲线UIBezierPath
- Android开发之蓝牙(Bluetooth)操作(一)--扫描已经配对的蓝牙设备
- easyUI中tab中的html片段导包与父页面的包冲突
- 【FLUENT案例】06:与EDEM耦合计算
- 【代码】key-value模式下的哈希二次探测与简单的哈希类的实现
- UE4 性能优化方法(工具篇)
- hdu 3836 Equivalent Sets
- pat 1007. Maximum Subsequence Sum (25)
- 优化duilib中的CDateTimeUI控件-修正XP下无法使用的问题