Android自定义View之贝塞尔曲线图

最近在做手环的开发，需求有一个心率的曲线图，鉴于网上很少能找到折线图曲线图的实现，找到的符合设计师的审美需求（这是我司设计师绝对不允许的），所以也就只有自己写一个呗。

效果图如下：



里面主要用到了几个知识，贝塞尔曲线&Android的PathMeasure&ValueAnimator。

首先是贝塞尔曲线在Android中的实现，图中的弯弯曲曲的效果则是通过贝塞尔曲线实现的，有用过PS的同学应该会比较熟悉。

贝塞尔曲线在Android中是通过Path类实现，利用Path.cubieTo()即可实现一小段的贝塞尔曲线效果，上图每两个白点间是两小段贝塞尔曲线，通过这样组成的一大段Path。

//Android中贝塞尔曲线使用方法cubicTo（带锚点）
mCurvePath.cubicTo((endPointX + lastPointX) / 2, lastPointY, (lastPointX + endPointX) / 2, endPointY, endPointX, endPointY);

Path.cubieTo()方法接受六个参数，第一个和第二个分别是曲线的起点的X轴坐标和Y轴坐标，第五个和第六个是Path的终点的X轴坐标和Y轴坐标，第三个和第四个参数是锚点的X轴坐标和Y轴坐标。两个白点平均分成两小段两个白点之间有两条贝塞尔曲线，分别以横坐标中点，终点的Y轴坐标为锚点。

0) {
if (data.length >= X_AXIS_POINT_COUNT) {
System.arraycopy(data, 0, mDataValue, 0, X_AXIS_POINT_COUNT);
} else {
System.arraycopy(data, 0, mDataValue, 0, data.length);
for (int i = data.length; i < X_AXIS_POINT_COUNT; i++) {
mDataValue[i] = 0;
}
}

reset();
//多条小贝塞尔曲线组成一条大曲线，每一条贝塞尔曲线都是三次贝塞尔曲线，两个控制点
float lastPointX;
float lastPointY;
for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
if (mDataValue[i] != 0) {
lastPointX = mDataPointAxisX[i];
lastPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;

for (int j = i; j < X_AXIS_POINT_COUNT; j++) {
if (mDataValue[j] != 0) {
float endPointX = mDataPointAxisX[j];
float endPointY = mGraphAxisYStartPosition - (mDataValue[j] - Y_AXIS_START_VALUE) * mAxisYValueScale;
mCurvePath.setLastPoint(lastPointX, lastPointY);
mCurvePath.cubicTo((endPointX + lastPointX) / 2, lastPointY, (lastPointX + endPointX) / 2, endPointY, endPointX, endPointY);

lastPointX = endPointX;
lastPointY = endPointY;
}
}
break;
}
}
mPathMeasure.setPath(mCurvePath, false);
mValueAnimator.start();
} else {
Log.e(TAG, "data can not be null!");
}" data-snippet-id="ext.a49c5b71b7c880ee00ebe6f0ff6849ab" data-snippet-saved="false" data-codota-status="done">[code]if (data != null && data.length > 0) {
if (data.length >= X_AXIS_POINT_COUNT) {
System.arraycopy(data, 0, mDataValue, 0, X_AXIS_POINT_COUNT);
} else {
System.arraycopy(data, 0, mDataValue, 0, data.length);
for (int i = data.length; i < X_AXIS_POINT_COUNT; i++) {
mDataValue[i] = 0;
}
}

reset();
//多条小贝塞尔曲线组成一条大曲线，每一条贝塞尔曲线都是三次贝塞尔曲线，两个控制点
float lastPointX;
float lastPointY;
for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
if (mDataValue[i] != 0) {
lastPointX = mDataPointAxisX[i];
lastPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;

for (int j = i; j < X_AXIS_POINT_COUNT; j++) {
if (mDataValue[j] != 0) {
float endPointX = mDataPointAxisX[j];
float endPointY = mGraphAxisYStartPosition - (mDataValue[j] - Y_AXIS_START_VALUE) * mAxisYValueScale;
mCurvePath.setLastPoint(lastPointX, lastPointY);
mCurvePath.cubicTo((endPointX + lastPointX) / 2, lastPointY, (lastPointX + endPointX) / 2, endPointY, endPointX, endPointY);

lastPointX = endPointX;
lastPointY = endPointY;
}
}
break;
}
}
mPathMeasure.setPath(mCurvePath, false);
mValueAnimator.start();
} else {
Log.e(TAG, "data can not be null!");
}

上面的代码主要是在代码中先把整一条大曲线通过每一小段的贝塞尔曲线组合好，再通过ValueAnimator和PathMeasure类组合使用造成动画效果，PathMeasure的使用很简单，查询一下API的使用方法几分钟就可以学会。

mValueAnimator = ValueAnimator.ofFloat(0f, ANIMATION_END_VALUE);
mValueAnimator.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
@Override
public void onAnimationUpdate(ValueAnimator animation) {
//最终的大曲线的长度
float length = mPathMeasure.getLength();
float factor = (float) animation.getAnimatedValue();
//根据动画进度获取现在的曲线长度
float currentPathLength = length * factor;
//获取应该绘制的白点数量
mDrawPointNum = (int) (factor / mPerPoint);
//获取现在长度的Path，获取到的对象会赋值给第三个参数
mPathMeasure.getSegment(0, currentPathLength, mDstAnimationPath, true);
invalidate();
}
});
mValueAnimator.setDuration(ANIMATION_DURATION);

在onDraw方法中调用下面的方法即可动画绘制曲线。

//根据ValueAnimation中获得的增长的值，获取对应长度的路径，造成动画效果
canvas.drawPath(mDstAnimationPath, mCurvePaint);

在onDraw方法中根据动画到达的位置绘制出白色点（我们的白色指示点是根据曲线到达的地点同时绘制的）

//画每个数据点
mIndicatePointPaint.setAlpha(0xFF);
for (int j = 0; j < mDataValue.length; j++) {

//在动画到达的地方才画出点
if (j < mDrawPointNum && mDataValue[j] != 0) {
float startPointX = mDataPointAxisX[j];
float startPointY = mGraphAxisYStartPosition - (mDataValue[j] - Y_AXIS_START_VALUE) * mAxisYValueScale;
canvas.drawCircle(startPointX, startPointY, POINT_CIRCLE_RADIUS, mIndicatePointPaint);
}
}

如果我们的View需要接受用户触摸时间，需要复写

onTouchEvent

方法，我们的View需要接受用户点击白点时，给用户展示白点指示的具体数值，如图中展示的数字81，在用户不点击白点时，这个数字是不展示的，那么我们就需要判断用户的触摸位置，给用户一个白点的触摸区域，下面展示的方法就是判断用户触摸的区域有没在任何一个白点的触摸区域，有就赋值用户触摸的是哪个点给

mTouchPoint

，然后调用

invalidate()

方法重绘：

= dataPointY - TOUCH_MIS && touchY <= dataPointY + TOUCH_MIS) {
if (touchX >= mDataPointAxisX[i] - TOUCH_MIS && touchX <= mDataPointAxisX[i] + TOUCH_MIS) {
mTouchPoint = i;
invalidate();
break;
}
}
}
}
return super.onTouchEvent(event);
}" data-snippet-id="ext.64424f166b017e1cf05cee56d85735ed" data-snippet-saved="false" data-codota-status="done">[code]@Override
public boolean onTouchEvent(MotionEvent event) {
float touchX = event.getX();
float touchY = event.getY();

if (!mValueAnimator.isRunning() && event.getAction() == MotionEvent.ACTION_DOWN) {

for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
float dataPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;
if (mDataValue[i] != 0 && touchY >= dataPointY - TOUCH_MIS && touchY <= dataPointY + TOUCH_MIS) {
if (touchX >= mDataPointAxisX[i] - TOUCH_MIS && touchX <= mDataPointAxisX[i] + TOUCH_MIS) {
mTouchPoint = i;
invalidate();
break;
}
}
}
}
return super.onTouchEvent(event);
}

在onDraw方法中，根据

mTouchPoint

变量的值绘制指示数字：

if (mTouchPoint != -1) {
float dataPointY = mGraphAxisYStartPosition - (mDataValue[mTouchPoint] - Y_AXIS_START_VALUE) * mAxisYValueScale;

mTextPaint.setAlpha(0xFF);
canvas.drawText(String.valueOf(mDataValue[mTouchPoint]), mDataPointAxisX[mTouchPoint], dataPointY - mTextSize, mTextPaint);

mIndicatePointPaint.setAlpha(0x33);
canvas.drawCircle(mDataPointAxisX[mTouchPoint], dataPointY, POINT_CIRCLE_RADIUS * 5, mIndicatePointPaint);
mTouchPoint = -1;
}

下面附上完整源码：

import android.animation.ValueAnimator;
import android.content.Context;
import android.graphics.Canvas;
import android.graphics.Color;
import android.graphics.CornerPathEffect;
import android.graphics.Paint;
import android.graphics.Path;
import android.graphics.PathMeasure;
import android.support.annotation.ColorRes;
import android.util.AttributeSet;
import android.util.Log;
import android.view.MotionEvent;
import android.view.View;

import com.example.demo.R;
import com.example.demo.utils.common.DensityUtil;

/**
* 曲线图，使用贝塞尔曲线画出的圆滑折线图
* Created by laizuling on 16/1/5.
*/
public class HeartRateGraphView extends View {
private static final String TAG = HeartRateGraphView.class.getSimpleName();
private static final int POINT_CIRCLE_RADIUS = 5;
private static final int Y_AXIS_MAX_VALUE = 120;
private static final int Y_AXIS_START_VALUE = 40;
private static final int X_AXIS_POINT_COUNT = 12;
private static final int HORIZONTAL_DIVIDER_LINE_NUM = 5;
private static final int TOUCH_MIS = 50;
public static final int ANIMATION_DURATION = 2 * 1000;
public static final float ANIMATION_END_VALUE = 1.0f;

private Path mCurvePath;
private Paint mCurvePaint;
private Paint mHorizontalLinePaint;
private Paint mIndicatePointPaint;
private Paint mTextPaint;

private int[] mDataValue;

private float mViewWidth;
private float mViewHeight;
private float mContentHeight;
private float mContentWidth;

private float mPaddingStart;
private float mPaddingEnd;
private float mPaddingTop;
private float mPaddingBottom;

//标示线的纵向距离
private float mHorizontalLineDividerHeight;
//Y轴上能表达的值，Y轴最大值 减去 Y轴起始值
private float mAxisYContentValue;
//Y轴上的比例，Y轴的高度 除以 Y周能表达的值
private float mAxisYValueScale;

private float[] mTimePointsAxisX;
private float[] mDataPointAxisX;
private float mTextSize;
private float mTopTextSize;
private float mTopTextPaddingBottom;

private Paint mTopTextPaint;
private float mGraphAxisYStartPosition;
private int mTouchPoint = -1;
private PathMeasure mPathMeasure;
private Path mDstAnimationPath;
private ValueAnimator mValueAnimator;
private int mDrawPointNum;
private float mPerPoint;
private DelayRunnable mDelayRunnable;

public HeartRateGraphView(Context context) {
super(context);
init(context);
}

public HeartRateGraphView(Context context, AttributeSet attrs) {
super(context, attrs);
init(context);
}

public HeartRateGraphView(Context context, AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
init(context);
}

public void setData(final int[] data) {
removeCallbacks(mDelayRunnable);
reset();
if (mDelayRunnable == null) {
mDelayRunnable = new DelayRunnable();
}
mDelayRunnable.setData(data);
postDelayed(mDelayRunnable, 150);
}

private class DelayRunnable implements Runnable {
private int[] data;

public void setData(int[] data) {
this.data = data;
}

@Override
public void run() {
setDataDelay(data);
}
}

private void reset() {
if (mValueAnimator.isRunning()) {
mValueAnimator.cancel();
}
mDrawPointNum = 0;
mDstAnimationPath.reset();
mCurvePath.reset();
mTouchPoint = -1;
invalidate();
}

private void setDataDelay(int[] data) {
if (data != null && data.length > 0) {
if (data.length >= X_AXIS_POINT_COUNT) {
System.arraycopy(data, 0, mDataValue, 0, X_AXIS_POINT_COUNT);
} else {
System.arraycopy(data, 0, mDataValue, 0, data.length);
for (int i = data.length; i < X_AXIS_POINT_COUNT; i++) {
mDataValue[i] = 0;
}
}

reset();
//多条小贝塞尔曲线组成一条大曲线，每一条贝塞尔曲线都是三次贝塞尔曲线，两个控制点
float lastPointX;
float lastPointY;
for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
if (mDataValue[i] != 0) {
lastPointX = mDataPointAxisX[i];
lastPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;

for (int j = i; j < X_AXIS_POINT_COUNT; j++) {
if (mDataValue[j] != 0) {
float endPointX = mDataPointAxisX[j];
float endPointY = mGraphAxisYStartPosition - (mDataValue[j] - Y_AXIS_START_VALUE) * mAxisYValueScale;
mCurvePath.setLastPoint(lastPointX, lastPointY);
mCurvePath.cubicTo((endPointX + lastPointX) / 2, lastPointY, (lastPointX + endPointX) / 2, endPointY, endPointX, endPointY);

lastPointX = endPointX;
lastPointY = endPointY;
}
}
break;
}
//                float startPointX = mDataPointAxisX[i - 1];
//                float startPointY = mGraphAxisYStartPosition - (mDataValue[i - 1] - Y_AXIS_START_VALUE) * mAxisYValueScale;
//                float endPointX = mDataPointAxisX[i];
//                float endPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;
//                //使用setLastPoint才能使用PathMeasure获得准确长度，做出动画效果
//                mCurvePath.setLastPoint(startPointX, startPointY);
//                mCurvePath.cubicTo((endPointX + startPointX) / 2, startPointY, (startPointX + endPointX) / 2, endPointY, endPointX, endPointY);
}

mPathMeasure.setPath(mCurvePath, false);
mValueAnimator.start();
} else {
Log.e(TAG, "data can not be null!");
}
}

public void setCurveColor(@ColorRes int colorId) {
mCurvePaint.setColor(getResources().getColor(colorId));
invalidate();
}

private void init(Context context) {
mPaddingTop = DensityUtil.dip2px(context, 5);
mPaddingStart = DensityUtil.dip2px(context, 12);
mPaddingEnd = DensityUtil.dip2px(context, 12);
mPaddingBottom = DensityUtil.dip2px(context, 20);

//TODO 基础心率先不显示，等显示再设置回来，不然view的高度太多空白
mTopTextSize = DensityUtil.sp2px(context, 0);
mTopTextPaddingBottom = DensityUtil.dip2px(context, 12);
mTextSize = DensityUtil.sp2px(context, 13);

mDataValue = new int[X_AXIS_POINT_COUNT];
mAxisYContentValue = Y_AXIS_MAX_VALUE - Y_AXIS_START_VALUE;

mTimePointsAxisX = new float[X_AXIS_POINT_COUNT];
mDataPointAxisX = new float[X_AXIS_POINT_COUNT];

mCurvePath = new Path();
mDstAnimationPath = new Path();
mPathMeasure = new PathMeasure();
mPerPoint = ANIMATION_END_VALUE / X_AXIS_POINT_COUNT;
mValueAnimator = ValueAnimator.ofFloat(0f, ANIMATION_END_VALUE);
mValueAnimator.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
@Override
public void onAnimationUpdate(ValueAnimator animation) {
float length = mPathMeasure.getLength();
float factor = (float) animation.getAnimatedValue();
float currentPathLength = length * factor;
mDrawPointNum = (int) (factor / mPerPoint);
mPathMeasure.getSegment(0, currentPathLength, mDstAnimationPath, true);
invalidate();
}
});
mValueAnimator.setDuration(ANIMATION_DURATION);

mHorizontalLinePaint = new Paint();
mHorizontalLinePaint.setAntiAlias(true);
mHorizontalLinePaint.setStyle(Paint.Style.STROKE);
mHorizontalLinePaint.setStrokeWidth(3);
mHorizontalLinePaint.setColor(Color.WHITE);

mIndicatePointPaint = new Paint();
mIndicatePointPaint.setAntiAlias(true);
mIndicatePointPaint.setStyle(Paint.Style.FILL);
mIndicatePointPaint.setStrokeWidth(5);
mIndicatePointPaint.setColor(Color.WHITE);

//        LinearGradient lg = new LinearGradient(0, 0, DensityUtil.dip2px(getContext(), 720), 0,
//                getResources().getColor(R.color.step_bar_start_color),
//                getResources().getColor(R.color.step_bar_end_color),
//                Shader.TileMode.CLAMP);

mCurvePaint = new Paint();
mCurvePaint.setAntiAlias(true);
mCurvePaint.setStyle(Paint.Style.STROKE);
mCurvePaint.setStrokeWidth(5);
//        mCurvePaint.setShader(lg);
mCurvePaint.setColor(Color.parseColor("#FDD119"));
mCurvePaint.setPathEffect(new CornerPathEffect(0xFF));

mTextPaint = new Paint();
mTextPaint.setAntiAlias(true);
mTextPaint.setTextSize(mTextSize);
mTextPaint.setTextAlign(Paint.Align.CENTER);
mTextPaint.setColor(Color.WHITE);

mTopTextPaint = new Paint();
mTopTextPaint.setAntiAlias(true);
mTopTextPaint.setTextSize(mTopTextSize);
mTopTextPaint.setColor(getResources().getColor(R.color.white_alpha_80));
}

@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
mViewWidth = getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec);
mViewHeight = getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec);

mContentHeight = mViewHeight - mPaddingTop - mPaddingBottom;
mContentWidth = mViewWidth - mPaddingStart - mPaddingEnd;
float graphHeight = mContentHeight - mTopTextSize - mTextSize * 2 - mTopTextPaddingBottom;

mGraphAxisYStartPosition = mViewHeight - mPaddingBottom - mTextSize;

//X轴每个点隔开的宽度
float axisXDividerWidth = mContentWidth / (float) X_AXIS_POINT_COUNT;
//让曲线的每个点，在X轴每个时间点的中间，表达平均值的意思
float dataPointOffSet = axisXDividerWidth / 2.0f + mTextSize / 2;
//Y轴内容的比例是Y轴的高度除以Y轴表达的值，得到Y轴的每一点的值对应的view高度
mAxisYValueScale = graphHeight / mAxisYContentValue;

mHorizontalLineDividerHeight = graphHeight / (HORIZONTAL_DIVIDER_LINE_NUM - 1);

for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
mTimePointsAxisX[i] = mPaddingStart + axisXDividerWidth * i;
mDataPointAxisX[i] = mTimePointsAxisX[i] + dataPointOffSet;
}
}

@Override
protected void onDraw(Canvas canvas) {
super.onDraw(canvas);
//        canvas.drawText(mContext.getString(R.string.resting_heart_rate) + mBaseHeartRate, mPaddingStart - mTextSize / 3, mPaddingTop + mTopTextSize, mTopTextPaint);

//画横向指示线
mTextPaint.setAlpha(0x7F);
for (int i = 0; i < HORIZONTAL_DIVIDER_LINE_NUM; i++) {
float y = mViewHeight - mPaddingBottom - mTextSize - mHorizontalLineDividerHeight * i;

//画横向指示线的每根线上面的指示数值
if (i != 0) {
String text = String.valueOf((int) (mAxisYContentValue / (HORIZONTAL_DIVIDER_LINE_NUM - 1) * i + Y_AXIS_START_VALUE));
canvas.drawText(text, mPaddingStart + mTextSize / 2, y - mTextSize / 4, mTextPaint);
mHorizontalLinePaint.setAlpha(0x33);
} else {
canvas.drawText(String.valueOf((int) Y_AXIS_START_VALUE), mPaddingStart + mTextSize / 2, y - mTextSize / 4, mTextPaint);
mHorizontalLinePaint.setAlpha(0x4D);
}

canvas.drawLine(mPaddingStart, y, mViewWidth - mPaddingEnd, y, mHorizontalLinePaint);
}

//画底部的时间指示点
mTextPaint.setAlpha(0xFF);
for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
canvas.drawText(String.valueOf(i * 2),
mPaddingStart + mContentWidth / X_AXIS_POINT_COUNT * i + mTextSize / 2,
mViewHeight - mPaddingBottom, mTextPaint);
}

//根据ValueAnimation中获得的增长的值，获取对应长度的路径，造成动画效果
canvas.drawPath(mDstAnimationPath, mCurvePaint);

//画每个数据点
mIndicatePointPaint.setAlpha(0xFF);
for (int j = 0; j < mDataValue.length; j++) {

//在动画到达的地方才画出点
if (j < mDrawPointNum && mDataValue[j] != 0) {
float startPointX = mDataPointAxisX[j];
float startPointY = mGraphAxisYStartPosition - (mDataValue[j] - Y_AXIS_START_VALUE) * mAxisYValueScale;
canvas.drawCircle(startPointX, startPointY, POINT_CIRCLE_RADIUS, mIndicatePointPaint);
}
}

if (mTouchPoint != -1) {
float dataPointY = mGraphAxisYStartPosition - (mDataValue[mTouchPoint] - Y_AXIS_START_VALUE) * mAxisYValueScale;

mTextPaint.setAlpha(0xFF);
canvas.drawText(String.valueOf(mDataValue[mTouchPoint]), mDataPointAxisX[mTouchPoint], dataPointY - mTextSize, mTextPaint);

mIndicatePointPaint.setAlpha(0x33);
canvas.drawCircle(mDataPointAxisX[mTouchPoint], dataPointY, POINT_CIRCLE_RADIUS * 5, mIndicatePointPaint);
mTouchPoint = -1;
}
}

@Override
public boolean onTouchEvent(MotionEvent event) {
float touchX = event.getX();
float touchY = event.getY();

if (!mValueAnimator.isRunning() && event.getAction() == MotionEvent.ACTION_DOWN) {

for (int i = 0; i < X_AXIS_POINT_COUNT; i++) {
float dataPointY = mGraphAxisYStartPosition - (mDataValue[i] - Y_AXIS_START_VALUE) * mAxisYValueScale;
if (mDataValue[i] != 0 && touchY >= dataPointY - TOUCH_MIS && touchY <= dataPointY + TOUCH_MIS) {
if (touchX >= mDataPointAxisX[i] - TOUCH_MIS && touchX <= mDataPointAxisX[i] + TOUCH_MIS) {
mTouchPoint = i;
invalidate();
break;
}
}
}

}
return super.onTouchEvent(event);
}
}