ESESC仿真器的安装

一、ESESC简介

1、ESESC blog has these slides

http://masc.soe.ucsc.edu/esesc

2、ESESC forum

https://groups.google.com/forum/#!forum/esesc

3、ESESC repository at github

https://github.com/masc-ucsc/esesc

4、To get the code

https://github.com/masc-ucsc/esesc.git

注意：上面都是一些链接，你可以从这些网站得到一些关于ESESC仿真器的资料。

二、ESESC仿真器的安装

1、首先从官网下载源代码，上面的链接已经给出

2、建立自己的目录结构，例如：/home/ercesi/cyh/esesc

3、将下载好的源代码解压到自己的目录下，例如： /home/ercesi/cyh/esesc/esesc-master

4、ESESC版本

ESESC有两个版本，即release版本和debug版本，debug版本slower、 more information ，然而release版本 faster 、less information，在本文中采用的是release版本。

在/home/ercesi/cyh/esesc/esesc-master下面建立build目录，在build目录下建立release目录，最后结果：/home/ercesi/cyh/esesc/esesc-master/build/release

5、安装下面的软件

sudo apt-get install build-essential
sudo apt-get install cmake
sudo apt-get install libboost-dev
sudo apt-get install bison flex
sudo apt-get install g++
sudo apt-get install python
sudo apt-get install texinfo
sudo apt-get install libglib2.0-dev
sudo apt-get install libncurses5-dev

6、编译

执行下面的指令：

cmake ～/cyh/esesc/esesc-master

输出的内容：

ercesi@demo:~/cyh/esesc/esesc-master/build/release$ cmake /home/ercesi/cyh/esesc/esesc-master
-- The C compiler identification is GNU 4.4.7
-- The CXX compiler identification is GNU 4.4.7
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Using /usr/bin/cc
-DESESC_SYSTEM=0              Enable esesc/qemu user mode simulation
-DESESC_LIVE=0                Disable esesc live compilation (default)
-DCMAKE_HOST_MARCH=native compilation
-DCMAKE_BUILD_TYPE=Release    release compilation options (default)
-- Found ZLIB: /usr/local/lib/libz.so (found version "1.2.8")
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Found Curses: /usr/lib/x86_64-linux-gnu/libcurses.so
-- Looking for XOpenDisplay in /usr/lib/x86_64-linux-gnu/libX11.so;/usr/lib/x86_64-linux-gnu/libXext.so
-- Looking for XOpenDisplay in /usr/lib/x86_64-linux-gnu/libX11.so;/usr/lib/x86_64-linux-gnu/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib/x86_64-linux-gnu/libX11.so
-- Could NOT find pixman-1 (missing:  PIXMAN_LIBRARY PIXMAN_INCLUDE_DIR)
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.26")
-- checking for one of the modules 'sdl2'
-- Found PythonInterp: /usr/bin/python (found version "2.7.6")
-- Configuring done
-- Generating done
-- Build files have been written to: /home/ercesi/cyh/esesc/esesc-master/build/release

执行下面的指令：

make

在这一步的时候我遇到了好多的问题，下面来谈谈我遇到的问题。

问题1:在80%的时候由于qume的问题而无法继续

解决的方法：执行下列代码

cd ～/cyh/esesc/esesc-master/emul/qemu
./configure
sudo make
sudo make install

问题2：再次make的时候，出现的问题是提示pixman的版本低

解决的方法：下载高版本的pixman，并且按照一般软件安装的方法进行安装。

问题3：再次make又会出现如下的问题：

ERROR: DTC (libfdt) not present. Your options:
(1) Preferred: Install the DTC (libfdt) devel package
(2) Fetch the DTC submodule, using:
git submodule update --init dtc

解决的方法：执行下面的代码：

sudo apt-get install libfdt-dev

问题4：再次make的时候出现以下的问题，提示许多的库找不到，这个时候耐心的安装所有短缺的库就可以。

/usr/bin/ld: cannot find -lGLESv2
/usr/bin/ld: cannot find -lepoxy
/usr/bin/ld: cannot find -lEGL
/usr/bin/ld: cannot find -lGLESv2
/usr/bin/ld: cannot find -lepoxy
/usr/bin/ld: cannot find -lEGL
/usr/bin/ld: cannot find -lGLESv2
/usr/bin/ld: cannot find -lepoxy
/usr/bin/ld: cannot find -lEGL
/usr/bin/ld: cannot find -laio
/usr/bin/ld: cannot find -lcurl
/usr/bin/ld: cannot find -lssh2
/usr/bin/ld: cannot find -lbz2
/usr/bin/ld: cannot find -lpixman-1
/usr/bin/ld: cannot find -lnuma
/usr/bin/ld: cannot find -lncursesw
/usr/bin/ld: cannot find -luuid
/usr/bin/ld: cannot find -lSDL
collect2: ld returned 1 exit status
make[2]: *** [main/esesc] Error 1
make[1]: *** [main/CMakeFiles/esesc.dir/all] Error 2
make: *** [all] Error 2

解决的方法：安装下列库文件

sudo apt-get install libgles2-mesa-dev
sudo apt-get install libepoxy-dev
sudo apt-get install libegl1-mesa-dev
sudo apt-get install libaio-dev
sudo apt-get install libcurl4-openssl-dev
sudo apt-get install libssh2-1-dev
sudo apt-get install libbz2-dev
sudo apt-get install libnuma-dev
sudo apt-get install libncursesw5-dev
sudo apt-get install uuid-dev
sudo apt-get install libsdl-dev

问题5：再次make又会出现下面的问题。

/usr/bin/ld: cannot find -lseccomp
collect2: ld returned 1 exit status
make[2]: *** [main/esesc] Error 1
make[1]: *** [main/CMakeFiles/esesc.dir/all] Error 2
make: *** [all] Error 2

解决的方法：执行下面的指令即可

sudo apt-get install libseccomp-dev

然后make，如果出现以下的内容证明ESESC安装成功。

[ 98%] Building CXX object main/CMakeFiles/rabbitso.dir/__/misc/libsuc/Snippets.cpp.o
Linking CXX shared library librabbitso.so
[ 98%] Built target rabbitso
Scanning dependencies of target gtest
[ 98%] Building CXX object tests/gtest-1.7.0/CMakeFiles/gtest.dir/src/gtest-all.cc.o
Linking CXX static library libgtest.a
[ 98%] Built target gtest
Scanning dependencies of target gtest_main
[100%] Building CXX object tests/gtest-1.7.0/CMakeFiles/gtest_main.dir/src/gtest_main.cc.o
Linking CXX static library libgtest_main.a
[100%] Built target gtest_main

7、运行例子程序

在release下面建立run文件夹，并且将/home/ercesi/cyh/esesc/esesc-master/bins/和/home/ercesi/cyh/esesc/esesc-master/conf/下的所有文件拷贝到run下。

接着执行下面的代码：

cd ~/cyh/esesc/esesc-master/build/release/run
~/cyh/esesc/esesc-master/build/release/main/esesc <crafty.in

输出的结果如下：

Fill router is ITLB(0)
Bottom:clear router is Memory(0)
single:clear router is L2(0)
single:clear router is IL1(0)
single:clear router is ITLB(0)
Fill router is PTLB(0)
Bottom:clear router is Memory(0)
single:clear router is L2(0)
Creating ooorder processor 0
Fill router is ITLB(1)
Bottom:clear router is Memory(1)
single:clear router is L2(1)
single:clear router is IL1(1)
single:clear router is ITLB(1)
Fill router is PTLB(1)
Bottom:clear router is Memory(0)
single:clear router is L2(0)
Creating ooorder processor 1
Fill router is ITLB(2)
Bottom:clear router is Memory(2)
single:clear router is L2(2)
single:clear router is IL1(2)
single:clear router is ITLB(2)
Fill router is PTLB(2)
Bottom:clear router is Memory(1)
single:clear router is L2(1)
Creating ooorder processor 2
Fill router is ITLB(3)
Bottom:clear router is Memory(3)
single:clear router is L2(3)
single:clear router is IL1(3)
single:clear router is ITLB(3)
Fill router is PTLB(3)
Bottom:clear router is Memory(1)
single:clear router is L2(1)
Creating ooorder processor 3
Sampler: inst, R:2500000, W:2450000, D:20000, T:130000
Sampler: inst, nInstMax:500000000, nInstSkip:100000000, maxnsTime:500000000
Power calculations disabled
STARTING QEMU ......
QEMUReader: Initializing qemu...
Starting qemu with
arg[0] is: qemu
arg[1] is: spec00_crafty.mips64
r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0
Crafty v14.3

White(1): White(1): pondering disabled.
White(1): noise level set to 0.
White(1): search time set to 99999.00.
White(1): verbosity set to 5.
White(1): White(1): search depth set to 11.
White(1):
clearing hash tables

depth   time  score   variation (1)
1   ###.##   4.14   Qxb6
1-> ###.##   4.14   Qxb6
2   ###.##   4.01   Qxb6 e4
2-> ###.##   4.01   Qxb6 e4
3   ###.##     ++   Qxb6!!
3   ###.##   4.32   Qxb6 Rf6 Qd8+ Kh7
3-> ###.##   4.32   Qxb6 Rf6 Qd8+ Kh7
4   ###.##   4.22   Qxb6 e4 Qe6 Rf2
4-> ###.##   4.22   Qxb6 e4 Qe6 Rf2
5   ###.##   4.15   Qxb6 Rf2 Qd8+ Kh7 Qd3+ e4 Qd6
5-> ###.##   4.15   Qxb6 Rf2 Qd8+ Kh7 Qd3+ e4 Qd6
6   ###.##   4.01   Qxb6 Rf2 Qd8+ Kh7 Qd5 Qe2 b4
6-> ###.##   4.01   Qxb6 Rf2 Qd8+ Kh7 Qd5 Qe2 b4
r0r0                7   ###.##     --   Qxb6
r0r0r0r0r0                7   ###.##   0.09   Qxb6 Rf1 Qd8+ Kh7 Qd3+ e4 Qxf1 Qxf1
b4
r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0                7-> ###.##   0.09   Qxb6 Rf1 Qd8+ Kh7 Qd3+ e4 Qxf1 Qxf1
b4
r0r0r0r0r0r0r0r0r0r0r0r0r0                8   ###.##  -0.13   Qxb6 Rf1 Qd8+ Kh7 Qd3+ e4 Qxf1 Qxf1
b4 e3
r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0r0BootLoader::unboot called... Finishing the work
Destroying TQueue 15 with pending nodes

继续执行下面的代码：

~/cyh/esesc/esesc-master/conf/scripts/report.pl -a

输出的结果如下：



Good Luck Fern!