关于《UNIX环境高级编程（第三版）》中apue.h头文件的设置

转载出处：http://www.linuxidc.com/Linux/2012-01/51729.htm

apue.h头文件（UNIX环境高级编程）

apue.h是作者自己写的一个文件，包含了常用的头文件，系统不自带。其中包含了常用的头文件，以及出错处理函数的定义。使用起来确实很方便。

apue.h内容如下：

#ifndef _APUE_H
#define _APUE_H

#define _XOPEN_SOURCE 600 /* Single UNIX Specification, Version 3 */

#include <sys/types.h> /* some systems still require this */
#include <sys/stat.h>
#include <sys/termios.h> /* for winsize */
#ifndef TIOCGWINSZ
#include <sys/ioctl.h>
#endif
#include <stdio.h> /* for convenience */
#include <stdlib.h> /* for convenience */
#include <stddef.h> /* for offsetof */
#include <string.h> /* for convenience */
#include <unistd.h> /* for convenience */
#include <signal.h> /* for SIG_ERR */

#define MAXLINE 4096 /* max line length */

/*
* Default file access permissions for new files.
*/
#define FILE_MODE (S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)

/*
* Default permissions for new directories.
*/
#define DIR_MODE (FILE_MODE | S_IXUSR | S_IXGRP | S_IXOTH)

typedef void Sigfunc(int); /* for signal handlers */

#if defined(SIG_IGN) && !defined(SIG_ERR)
#define SIG_ERR ((Sigfunc *)-1)
#endif

#define min(a,b) ((a) < (b) ? (a) : (b))
#define max(a,b) ((a) > (b) ? (a) : (b))

/*
* Prototypes for our own functions.
*/
char *path_alloc(int *); /* Figure 2.15 */
long open_max(void); /* Figure 2.16 */
void clr_fl(int, int); /* Figure 3.11 */
void set_fl(int, int); /* Figure 3.11 */
void pr_exit(int); /* Figure 8.5 */
void pr_mask(const char *); /* Figure 10.14 */
Sigfunc *signal_intr(int, Sigfunc *); /* Figure 10.19 */

int tty_cbreak(int); /* Figure 18.20 */
int tty_raw(int); /* Figure 18.20 */
int tty_reset(int); /* Figure 18.20 */
void tty_atexit(void); /* Figure 18.20 */
#ifdef ECHO /* only if <termios.h> has been included */
struct termios *tty_termios(void); /* Figure 18.20 */
#endif

void sleep_us(unsigned int); /* Exercise 14.6 */
ssize_t readn(int, void *, size_t); /* Figure 14.29 */
ssize_t writen(int, const void *, size_t); /* Figure 14.29 */
void daemonize(const char *); /* Figure 13.1 */

int s_pipe(int *); /* Figures 17.6 and 17.13 */
int recv_fd(int, ssize_t (*func)(int,
const void *, size_t));/* Figures 17.21 and 17.23 */
int send_fd(int, int); /* Figures 17.20 and 17.22 */
int send_err(int, int,
const char *); /* Figure 17.19 */
int serv_listen(const char *); /* Figures 17.10 and 17.15 */
int serv_accept(int, uid_t *); /* Figures 17.11 and 17.16 */

int cli_conn(const char *); /* Figures 17.12 and 17.17 */
int buf_args(char *, int (*func)(int,
char **)); /* Figure 17.32 */

int ptym_open(char *, int); /* Figures 19.8, 19.9, and 19.10 */
int ptys_open(char *); /* Figures 19.8, 19.9, and 19.10 */
#ifdef TIOCGWINSZ
pid_t pty_fork(int *, char *, int, const struct termios *,
const struct winsize *); /* Figure 19.11 */
#endif

int lock_reg(int, int, int, off_t, int, off_t); /* Figure 14.5 */
#define read_lock(fd, offset, whence, len) \
lock_reg((fd), F_SETLK, F_RDLCK, (offset), (whence), (len))
#define readw_lock(fd, offset, whence, len) \
lock_reg((fd), F_SETLKW, F_RDLCK, (offset), (whence), (len))
#define write_lock(fd, offset, whence, len) \
lock_reg((fd), F_SETLK, F_WRLCK, (offset), (whence), (len))
#define writew_lock(fd, offset, whence, len) \
lock_reg((fd), F_SETLKW, F_WRLCK, (offset), (whence), (len))
#define un_lock(fd, offset, whence, len) \
lock_reg((fd), F_SETLK, F_UNLCK, (offset), (whence), (len))

pid_t lock_test(int, int, off_t, int, off_t); /* Figure 14.6 */

#define is_read_lockable(fd, offset, whence, len) \
(lock_test((fd), F_RDLCK, (offset), (whence), (len)) == 0)
#define is_write_lockable(fd, offset, whence, len) \
(lock_test((fd), F_WRLCK, (offset), (whence), (len)) == 0)

void err_dump(const char *, ...); /* Appendix B */
void err_msg(const char *, ...);
void err_quit(const char *, ...);
void err_exit(int, const char *, ...);
void err_ret(const char *, ...);
void err_sys(const char *, ...);

void log_msg(const char *, ...); /* Appendix B */
void log_open(const char *, int, int);
void log_quit(const char *, ...);
void log_ret(const char *, ...);
void log_sys(const char *, ...);

void TELL_WAIT(void); /* parent/child from Section 8.9 */
void TELL_PARENT(pid_t);
void TELL_CHILD(pid_t);
void WAIT_PARENT(void);
void WAIT_CHILD(void);

#endif /* _APUE_H */

想要使用，还要进行下面操作，完成相关配置.

在http://www.apuebook.com/下载src.tar.gz源代码的压缩包。

1、解压至/home/user/目录下

2、修改 Make.defines.linux中的WKDIR=/home/xxx/apue.2e，为WKDIR=/home/user/apue.2e

3、返回至apue.2e目录下面，修改linux.mk，将里面的nawk全部改为awk，可以使用这个命令 ：%s/nawk/awk/g

4、make

5、将/home/user/apue.2e/include/apue.h和/home/user/apue.2e/lib/error.c复制到/usr/include目录下

然后就可以方便的使用apue.h编译《unix高级环境编程》的的程序了