C/C++中各种类型int、long、double、char表示范围(最大最小值)(转)
2016-02-20 21:39
405 查看
#include<iostream> #include<string> #include <limits> using namespace std; int main() { cout << "type: \t\t" << "************size**************"<< endl; cout << "bool: \t\t" << "所占字节数:" << sizeof(bool); cout << "\t最大值:" << (numeric_limits<bool>::max)(); cout << "\t\t最小值:" << (numeric_limits<bool>::min)() << endl; cout << "char: \t\t" << "所占字节数:" << sizeof(char); cout << "\t最大值:" << (numeric_limits<char>::max)(); cout << "\t\t最小值:" << (numeric_limits<char>::min)() << endl; cout << "signed char: \t" << "所占字节数:" << sizeof(signed char); cout << "\t最大值:" << (numeric_limits<signed char>::max)(); cout << "\t\t最小值:" << (numeric_limits<signed char>::min)() << endl; cout << "unsigned char: \t" << "所占字节数:" << sizeof(unsigned char); cout << "\t最大值:" << (numeric_limits<unsigned char>::max)(); cout << "\t\t最小值:" << (numeric_limits<unsigned char>::min)() << endl; cout << "wchar_t: \t" << "所占字节数:" << sizeof(wchar_t); cout << "\t最大值:" << (numeric_limits<wchar_t>::max)(); cout << "\t\t最小值:" << (numeric_limits<wchar_t>::min)() << endl; cout << "short: \t\t" << "所占字节数:" << sizeof(short); cout << "\t最大值:" << (numeric_limits<short>::max)(); cout << "\t\t最小值:" << (numeric_limits<short>::min)() << endl; cout << "int: \t\t" << "所占字节数:" << sizeof(int); cout << "\t最大值:" << (numeric_limits<int>::max)(); cout << "\t最小值:" << (numeric_limits<int>::min)() << endl; cout << "unsigned: \t" << "所占字节数:" << sizeof(unsigned); cout << "\t最大值:" << (numeric_limits<unsigned>::max)(); cout << "\t最小值:" << (numeric_limits<unsigned>::min)() << endl; cout << "long: \t\t" << "所占字节数:" << sizeof(long); cout << "\t最大值:" << (numeric_limits<long>::max)(); cout << "\t最小值:" << (numeric_limits<long>::min)() << endl; cout << "unsigned long: \t" << "所占字节数:" << sizeof(unsigned long); cout << "\t最大值:" << (numeric_limits<unsigned long>::max)(); cout << "\t最小值:" << (numeric_limits<unsigned long>::min)() << endl; cout << "double: \t" << "所占字节数:" << sizeof(double); cout << "\t最大值:" << (numeric_limits<double>::max)(); cout << "\t最小值:" << (numeric_limits<double>::min)() << endl; cout << "long double: \t" << "所占字节数:" << sizeof(long double); cout << "\t最大值:" << (numeric_limits<long double>::max)(); cout << "\t最小值:" << (numeric_limits<long double>::min)() << endl; cout << "float: \t\t" << "所占字节数:" << sizeof(float); cout << "\t最大值:" << (numeric_limits<float>::max)(); cout << "\t最小值:" << (numeric_limits<float>::min)() << endl; cout << "size_t: \t" << "所占字节数:" << sizeof(size_t); cout << "\t最大值:" << (numeric_limits<size_t>::max)(); cout << "\t最小值:" << (numeric_limits<size_t>::min)() << endl; cout << "string: \t" << "所占字节数:" << sizeof(string) << endl; // << "\t最大值:" << (numeric_limits<string>::max)() << "\t最小值:" << (numeric_limits<string>::min)() << endl; cout << "type: \t\t" << "************size**************"<< endl; return 0; }
以上结果已经很明白了,一下补充说明几点:
概念、整型:表示整数、字符和布尔值的算术类型合称为整型(integral type)。
关于带符号与无符号类型:整型 int、stort 和 long 都默认为带符号型。要获得无符号型则必须制定该类型为unsigned,比如unsigned long。unsigned int类型可以简写为unsigned,也就是说,unsigned后不加其他类型说明符就意味着是unsigned int。
一字节表示八位,即:1byte = 8 bit;
int: 4byte = 32 bit 有符号signed范围:2^31-1 ~ -2^31即:2147483647 ~ -2147483648无符号unsigned范围:2^32-1 ~ 0即:4294967295 ~ 0
long: 4 byte = 32 bit 同int型
double: 8 byte = 64 bit 范围:1.79769e+308 ~ 2.22507e-308
long double: 12 byte = 96 bit 范围: 1.18973e+4932 ~ 3.3621e-4932
float: 4 byte = 32 bit 范围: 3.40282e+038 ~ 1.17549e-038
int、unsigned、long、unsigned long 、double的数量级最大都只能表示为10亿,即它们表示十进制的位数不超过10个,即可以保存所有9位整数。而short只是能表示5位;
另外对于浮点说而言:使用double类型基本上不会有错。在float类型中隐式的精度损失是不能忽视的,二双精度计算的代价相对于单精度可以忽略。事实上,在有些机器上,double类型比float类型的计算要快得多。float型只能保证6位有效数字,而double型至少可以保证15位有效数字(小数点后的数位),long double型提供的精度通常没有必要,而且还要承担额外的运行代价。
double是8字节共64位,其中小数位占52位,2-^52=2.2204460492503130808472633361816e-16,量级为10^-16,故能够保证2^-15的所有精度。
在有些机器上,用long类型进行计算所付出的运行时代价远远高于用int类型进行同样计算的代价,所以算则类型前要先了解程序的细节并且比较long类型与int类型的实际运行时性能代价。
转自:http://blog.csdn.net/xuexiacm/article/details/8122267
相关文章推荐
- c++笔试题总结2
- neuq oj 1044: 谭浩强C语言(第三版)习题5.8 C++
- C++操作二进制文件
- [C++]类模板
- C++学习之 构造函数中调用构造函数
- c++异常安全和copy and swap策略
- C++ 回调机制
- 重温C++ 之 重载操作符
- C++中的类所占内存空间总结
- 关于C++虚函数表实例
- 数字相加等于2048c++源代码
- C++学习笔记之 构造函数的初始化列表
- 算法训练 C*++ Calculations
- C++ 创建windows 服务
- [C++]vector,list和deque的区别
- 一个C++小程序——文件整理工具
- C++例程与Java例程的对比
- JSON c语言开发指南
- C/C++程序员应聘常见面试题剖析
- 多线程学习