xcode armv6 armv7 armv7s arm64
2016-01-30 16:13
337 查看
目前ios的指令集有以下几种:
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容(第一代是老一辈,下面是子孙)的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
================================================
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existing
app, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的 ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
armv6
iPhone
iPhone2
iPhone3G
第一代和第二代iPod Touch
armv7
iPhone4
iPhone4S
armv7s
iPhone5
iPhone5C
arm64
iPhone5S
机器对指令集的支持是向下兼容(第一代是老一辈,下面是子孙)的,因此armv7的指令集是可以运行在iphone5S的,只是效率没那么高而已~
================================================
Architecture : 指你想支持的指令集。
Valid architectures : 指即将编译的指令集。
Build Active Architecture Only : 只是否只编译当前适用的指令集。
================================================
现在是2014年初,其实4和4S的用户还是蛮多的,而iphone3之类的机器几乎没有了,所以我们的指令集最低必须基于armv7.
因此,Architecture的值选择:armv7 armv7s arm64
PS:选arm64时需要最低支持5.1.1:
Convert Your App to a 64-Bit Binary After Updating It for iOS 7
Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existingapp, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit
versions of your app.
The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the
one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the
NSIntegerand
CGFloattypes
needs to be carefully examined.
Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:
Make sure all function calls have a proper prototype.
Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
Ensure that calculations are performed correctly in the 64-bit version of your app.
Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).
1,如果想自己的app在各个机器都能够最高效率的运行,则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集:armv7 armv7s arm64。这个会为各个指令集编译对应的代码,因此最后的 ipa体积基本翻了3倍,Release版本必须NO。
2,如果想让app体积保持最小,则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了
相关文章推荐
- MySQL error: The partition with /var/lib/mysql is too full!
- [Codecademy] HTML&CSS 第一课:HTML Basic
- hdu 2069 Coin Change(完全背包)
- LeetCode 278 First Bad Version(第一个坏版本)(二分法)(*)
- Analysis of algorithms: introduction
- 网上图书商城项目学习笔记-019我的订单
- 【转】ArrayList的toArray,也就是list.toArray[new String[list.size()]];,即List转为数组
- CSShack大全
- Leetcode题解(21)
- jdk与jre的区别及关系
- nth-of-type(2)和nth-child(2)的区别
- c语言:实现对于给定的正整数N,依次打印出小于等于N的所有素数。两种方法及其优化
- vim的一般配置
- Qt4.8 移植
- 从头认识Spring-目录
- PHP面向对象深入研究之【命名空间】与【自动加载类】
- 使用HTML5 canvas做地图(3)图片加载平移放大缩小
- 芒果iOS开发之git add -a和git add -u、git add .区别
- git的使用
- virtualbox中安装ubuntu Server