CentOS Linux解决Device eth0 does not seem to be present
2016-01-15 13:39
585 查看
在VMware里克隆出来的CentOS Linux。。
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法:
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
正常了。
来源: http://www.linuxidc.com/Linux/2012-12/76248.htm
来自为知笔记(Wiz)
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法:
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
正常了。
来源: http://www.linuxidc.com/Linux/2012-12/76248.htm
来自为知笔记(Wiz)
相关文章推荐
- Linux中断(interrupt)子系统之五:软件中断(softIRQ)
- Linux中断(interrupt)子系统之四:驱动程序接口层 & 中断通用逻辑层
- Linux中断(interrupt)子系统之三:中断流控处理层
- Linux磁盘开机自动挂载
- Linux中断(interrupt)子系统之二:arch相关的硬件封装层
- Linux中断(interrupt)子系统之一:中断系统基本原理
- Linux中安装JDK
- IBM CentOS7系统安装
- Linux下Nodejs安装(完整详细)
- 献给初学者:谈谈如何学习Linux
- Arm-linux平台(海思hi3518E)字节对齐方式
- Linux学习笔记:MYSQL 5.5安装与多实例运行
- Linux虚拟机与外面系统ping不通,或者连不上网
- 【OCR】CentOS7下编译安装tesseract-ocr
- Linux使用SecureCRT上传下载
- 详解Linux系统中crontab命令处理定时任务的用法
- linux下利用sed重命名文件
- 初探centos7-安装
- 总结Linux中用于终结进程的kill和pikill及killall命令用法
- Linux3.5下I2C设备驱动程序