CentOS VirtualBox启动虚拟及报错:VirtualBox error: Kernel driver not installed (rc=1908)
2015-12-21 21:11
423 查看
VirtualBox error: Kernel driver not installed (rc=1908)
Hi all, Let me first say that this is my final resort after googling this issue for the last several hours. None of the solutions that I have found are working for me. My VirtualBox (PUEL, not OSE) was working fine until about three hrs ago. I am receiving the following error: p, li { white-space: pre-wrap; } Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. By searching other threads, I ran the following: Code: sudo /etc/init.d/vboxdrv setup I received the following output: sudo: /etc/init.d/vboxdrv: command not found I have removed VB several times and reinstalled using th
因为在安装VirtualBox的时候没有安装必要的核心模块,导致Recompiling VirtualBox kernel modules失败,解决方法,安装必要模块后root执行/etc/init.d/vboxdrv setup。
Hi all, Let me first say that this is my final resort after googling this issue for the last several hours. None of the solutions that I have found are working for me. My VirtualBox (PUEL, not OSE) was working fine until about three hrs ago. I am receiving the following error: p, li { white-space: pre-wrap; } Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. By searching other threads, I ran the following: Code: sudo /etc/init.d/vboxdrv setup I received the following output: sudo: /etc/init.d/vboxdrv: command not found I have removed VB several times and reinstalled using th
因为在安装VirtualBox的时候没有安装必要的核心模块,导致Recompiling VirtualBox kernel modules失败,解决方法,安装必要模块后root执行/etc/init.d/vboxdrv setup。
相关文章推荐
- linux提权辅助工具 – Linux_Exploit_Suggester
- CentOS下默认RPM安装路径
- centos升级openssh的两种方式
- Linux超大漏洞,按28次Backspace键即可入侵电脑
- linux mount的使用
- 运维入门---CentOS6.5安装Nexus
- CentOs突然启动不了了,“Determining IP information for eth0…”及"Bringing up interface eth0:"解决方法
- linux命令学习(3)
- linux驱动学习笔记(linux驱动头文件说明)
- Linux tty驱动学习 - 串口通信,UART及UART驱动概述
- 运维入门---CentOS6.5安装Jenkins
- linux下的命令
- linux对dubbo的维护
- linux文件压缩与解压
- linux基础(十九)----linux编程基础----linux循环控制语句----break中断和continue继续
- linux基础(十九)----linux编程基础----linux循环控制语句----break中断和continue继续
- Linux中文显示乱码?如何设置centos显示中文
- Linux中文显示乱码?如何设置centos显示中文
- CENTOS 7 开启80端口
- 编译linux内核出现 arm-eabi-gcc: error: ": No such file or directory