linux-->touch命令详解
2015-12-20 20:29
651 查看
linux的touch命令不常用,一般在使用make的时候可能会用到,用来修改文件时间戳,或者新建一个不存在的文件。
1.命令格式:
touch [选项]... 文件...
2.命令参数:
-a 或--time=atime或--time=access或--time=use 只更改存取时间。
-c 或--no-create 不建立任何文档。
-d 使用指定的日期时间,而非现在的时间。
-f 此参数将忽略不予处理,仅负责解决BSD版本touch指令的兼容性问题。
-m 或--time=mtime或--time=modify 只更改变动时间。
-r 把指定文档或目录的日期时间,统统设成和参考文档或目录的日期时间相同。
-t 使用指定的日期时间,而非现在的时间。
3.命令功能:
touch命令参数可更改文档或目录的日期时间,包括存取时间和更改时间。
4.使用范例:
实例一:创建不存在的文件
命令:
touch log2012.log log2013.log
输出:
[root@localhost test]# touch log2012.log log2013.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
如果log2014.log不存在,则不创建文件
[root@localhost test]# touch -c log2014.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
实例二:更新log.log的时间和log2012.log时间戳相同
命令:
touch -r log.log log2012.log
输出:
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
[root@localhost test]# touch -r log.log log2012.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
实例三:设定文件的时间戳
命令:
touch -t 201211142234.50 log.log
输出:
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
[root@localhost test]# touch -t 201211142234.50 log.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 2012-11-14 log.log
说明:
-t time 使用指定的时间值 time 作为指定文件相应时间戳记的新值.此处的 time规定为如下形式的十进制数:
[[CC]YY]MMDDhhmm[.SS]
这里,CC为年数中的前两位,即”世纪数”;YY为年数的后两位,即某世纪中的年数.如果不给出CC的值,则touch 将把年数CCYY限定在1969--2068之内.MM为月数,DD为天将把年数CCYY限定在1969--2068之内.MM为月数,DD为天数,hh 为小时数(几点),mm为分钟数,SS为秒数.此处秒的设定范围是0--61,这样可以处理闰秒.这些数字组成的时间是环境变量TZ指定的时区中的一个时 间.由于系统的限制,早于1970年1月1日的时间是错误的。
1.命令格式:
touch [选项]... 文件...
2.命令参数:
-a 或--time=atime或--time=access或--time=use 只更改存取时间。
-c 或--no-create 不建立任何文档。
-d 使用指定的日期时间,而非现在的时间。
-f 此参数将忽略不予处理,仅负责解决BSD版本touch指令的兼容性问题。
-m 或--time=mtime或--time=modify 只更改变动时间。
-r 把指定文档或目录的日期时间,统统设成和参考文档或目录的日期时间相同。
-t 使用指定的日期时间,而非现在的时间。
3.命令功能:
touch命令参数可更改文档或目录的日期时间,包括存取时间和更改时间。
4.使用范例:
实例一:创建不存在的文件
命令:
touch log2012.log log2013.log
输出:
[root@localhost test]# touch log2012.log log2013.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
如果log2014.log不存在,则不创建文件
[root@localhost test]# touch -c log2014.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
实例二:更新log.log的时间和log2012.log时间戳相同
命令:
touch -r log.log log2012.log
输出:
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 16:01 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
[root@localhost test]# touch -r log.log log2012.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
实例三:设定文件的时间戳
命令:
touch -t 201211142234.50 log.log
输出:
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 10-28 14:48 log.log
[root@localhost test]# touch -t 201211142234.50 log.log
[root@localhost test]# ll
-rw-r--r-- 1 root root 0 10-28 14:48 log2012.log
-rw-r--r-- 1 root root 0 10-28 16:01 log2013.log
-rw-r--r-- 1 root root 0 2012-11-14 log.log
说明:
-t time 使用指定的时间值 time 作为指定文件相应时间戳记的新值.此处的 time规定为如下形式的十进制数:
[[CC]YY]MMDDhhmm[.SS]
这里,CC为年数中的前两位,即”世纪数”;YY为年数的后两位,即某世纪中的年数.如果不给出CC的值,则touch 将把年数CCYY限定在1969--2068之内.MM为月数,DD为天将把年数CCYY限定在1969--2068之内.MM为月数,DD为天数,hh 为小时数(几点),mm为分钟数,SS为秒数.此处秒的设定范围是0--61,这样可以处理闰秒.这些数字组成的时间是环境变量TZ指定的时区中的一个时 间.由于系统的限制,早于1970年1月1日的时间是错误的。
相关文章推荐
- linux-->cat命令详解
- Linux常见服务(守护进程)
- Linux vi vim 常用快捷键操作(一)
- CENTOS 服务器安装WordPress流程
- CentOS x64上Matlab R2015b的镜像安装方法与卸载
- 如何更改Linux中默认的openjdk为自己安装的JDK
- Linux——磁盘基本概念
- Linux——Vi、Vim编辑器命令基础
- linux 中cut 命令的用法
- Linux软RAID配置
- CentOS 7系统中恢复Windows 7启动项
- CentOS: make menuconfig error: curses.h: No such file or directory
- Linux系统下安装rz/sz命令及使用说明
- 设备驱动的艺术之旅 - Linux 网卡驱动
- 学习linux进阶路线图
- Linux中关于权限的一个问题
- linux用户权限管理
- 双系统Linux(ubuntu)进入windows的NTFS分区之挂载错误
- Linux常用命令
- Linux下SVN安装配置