Samba Server Configuration in OpenSuSe 13.1

https://www.howtoforge.com/opensuse-13.1-samba-server

1 Preliminary Note

I have fresh installed Opensuse 13.1 server, on which I am going to install the samba server. Off-course you need to have one windows machine to check the  samba server that must be reachable with the Opensuse 13.1 server. My Opensuse 13.1 server have hostname
server1.example.com & IP as 192.168.0.100

You can have your opensuse 13.1 server installed from the starting five chapters of the

tutorial.

Note:

The Windows machine must be on same workgroup. To check the value in windows machine run the command at cmd prompt

net config workstation
It will be like this





Your windows machine must be at same Workstation domain as in Opensuse 13.1 server, i.e.
WORKGROUP in my case.
To make the windows machine reachable in windows proceed like this. In the run terminal & add  the entry of your server IP address
notepad C:\Windows\System32\drivers\etc\hosts
In my case it was like this, just save the values.

[...] 192.168.0.100 server1.example.com opensuse 13.1

2 Anonymous samba sharing

First I will explain the methodology to install the samba with the anonymous sharing. To install samba run,

zypper install samba samba-client
It will ask for your input

server1:~ # zypper install samba samba-client

Loading repository data...

Reading installed packages...

Resolving package dependencies...

Problem: patterns-openSUSE-minimal_base-conflicts-13.1-13.6.1.x86_64 conflicts with samba-client provided by samba-client-4.1.6-3.18.1.x86_64

 Solution 1: Following actions will be done:

  do not install samba-client-4.1.6-3.18.1.x86_64

  do not install samba-4.1.6-3.18.1.x86_64

 Solution 2: deinstallation of patterns-openSUSE-minimal_base-conflicts-13.1-13.6.1.x86_64

Choose from above solutions by number or cancel [1/2/c] (c):<--2
Resolving dependencies...

Resolving package dependencies...

The following 41 NEW packages are going to be installed:

  cifs-utils cups-libs libarchive13 libdcerpc0 libdcerpc-binding0 libfam0

  libgensec0 libjbig2 libjpeg8 libldb1 libndr0 libndr-krb5pac0 libndr-nbt0

  libndr-standard0 libnetapi0 libpdb0 libregistry0 libsamba-credentials0

  libsamba-hostconfig0 libsamba-util0 libsamdb0 libsmbclient0 libsmbclient-raw0

  libsmbconf0 libsmbldap0 libtalloc2 libtdb1 libtevent0 libtevent-util0

  libtiff5 libwbclient0 perl-Crypt-SmbHash perl-Digest-MD4 perl-XML-LibXML

  pytalloc samba samba-client samba-libs yast2-kerberos-client

  yast2-samba-client yast2-samba-server

The following package is going to be REMOVED:

  patterns-openSUSE-minimal_base-conflicts

41 new packages to install, 1 to remove.

Overall download size: 11.1 MiB. After the operation, additional 32.4 MiB will

be used.

Continue? [y/n/? shows all options] (y): <--y

It will install samba with
Version 4.1.6-3.18.1-3208-SUSE-oS13.1-x86_64

Now to configure samba edit the file /etc/samba/smb.cnf
before making changes I will make the backup of original file as 
/etc/samba/smb.cnf.bak

mv /etc/samba/smb.cnf /etc/samba/smb.cnf.bak
Further give the entries like this

vi /etc/samba/smb.cnf

[global] workgroup = WORKGROUP passdb backend = tdbsam server string = Samba Server %v netbios name = opensuse security = user map to guest = bad user dns proxy = no #============================ Share Definitions ============================== [Anonymous] path = /samba/anonymous browsable =yes writable = yes guest ok = yes read only = no

mkdir -p /samba/anonymous
systemctl restart smb.service

Now you can access the opensuse 13.1 sharing in windows as follows:





From windows machine just browse the folder& try to create a text file, but you will get an error of permission denied.









Check the permission for the shared folder.

root@server1:~# ls -l /samba/

total 4

drwxr-xr-x 2 root root 4096 May 29 18:17 anonymous

root@server1:~#

To allow anonymous user give the permissions as follows;
root@server1:~# cd /samba

root@server1:/samba# chmod -R 0777 anonymous/

root@server1:/samba# ls -l

total 4

drwxrwxrwx 2 root root 4096 May 29 18:17 anonymous

root@server1:/samba#
Now anonymous user can browse & create the folder contents.




You can cross check the content at server also.

server1:/samba # ls -l anonymous/

total 0

-rwxr--r-- 1 nobody nobody 0 May 29 16:37 anonymous_test.txt

server1:/samba #

3. Secured samba server

For this I will create a group
smbgrp & user srijan to access the samba server with proper authentication

groupadd smbgrp
useradd srijan -G smbgrp
smbpasswd -a srijan
server1:~ # smbpasswd -a srijan

New SMB password:

Retype new SMB password:

Added user srijan.

server1:~ #
Now create the folder viz secured in the
/samba folder & give permissions like this

mkdir -p /samba/secured

cd /samba

chmod -R 0770 secured/

Again edit the configuration file as :

vi /etc/samba/smb.conf

[secured] path = /samba/secured valid users = @smbgrp guest ok = no writable = yes browsable = yes

systemctl restart smb.service

Further to cross-check the settings check as follows:

server1:~ # testparm

Load smb config files from /etc/samba/smb.conf

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)

Processing section "[Anonymous]"

Processing section "[secured]"

Loaded services file OK.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

Now at windows machine check the folder now with the proper credentials





You will again face the issue of permissions to give write permission to the user
srijan do:




cd /samba

chown -R srijan:smbgrp secured/

Now samba user srijan  have permissions to write in the folder. Cheers you have done with samba server in Opensuse 13.1






view as pdf |



print

Share this page:
Tweet

Follow

1 Comment(s)

Add comment

Name *
Email *

p