MFC让控件随窗口大小而改变

转载自http://blog.csdn.net/chw1989/article/details/7488711

大小和位置都改变(亲测可行)

1.首先为窗体类添加CRect m_rect，该成员变量用来记录窗体的当前大小。

2.在类向导里面（Ctrl+W），为窗体添加消息WM_SIZE的响应函数OnSize(）；

注意if(nType==1) return;这一句必须添加，否则最小化恢复的时候会出错

void CPaperManagementDlg::OnSize(UINT nType, int cx, int cy)
{
CDialog::OnSize(nType, cx, cy);
if(nType==1) return;//最小化则什么都不做
// TODO: Add your message handler code here
CWnd *pWnd;
pWnd = GetDlgItem(IDC_STATIC);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_FILE_TREE);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_EDIT_NAME);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_EDIT_REFERENCE);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_EDIT_SUMMARY);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_EDIT_REMARK);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_BUTTON_UPDATE);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_BUTTON_SAVE);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_STATIC_1);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_STATIC_2);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_STATIC_3);
ChangeSize(pWnd, cx, cy);
pWnd = GetDlgItem(IDC_STATIC_4);
ChangeSize(pWnd, cx, cy);
GetClientRect(&m_rect);// 将变化后的对话框大小设为旧大小
}

changesize是自己添加的函数

void CPaperManagementDlg::ChangeSize(CWnd *pWnd, int cx, int cy)
{
if(pWnd)  //判断是否为空，因为对话框创建时会调用此函数，而当时控件还未创建
{
CRect rect;   //获取控件变化前的大小
pWnd->GetWindowRect(&rect);
ScreenToClient(&rect);//将控件大小转换为在对话框中的区域坐标

//    cx/m_rect.Width()为对话框在横向的变化比例
rect.left=rect.left*cx/m_rect.Width();//调整控件大小
rect.right=rect.right*cx/m_rect.Width();
rect.top=rect.top*cy/m_rect.Height();
rect.bottom=rect.bottom*cy/m_rect.Height();
pWnd->MoveWindow(rect);//设置控件大小
}
}